The MongoDB\Driver\Cursor class
(mongodb >=1.0.0)
Introduction
The MongoDB\Driver\Cursor class encapsulates the results of a MongoDB command or query and may be returned by MongoDB\Driver\Manager::executeCommand() or MongoDB\Driver\Manager::executeQuery(), respectively.
Class synopsis
Examples
Example #1 Reading a result set
MongoDB\Driver\Manager::executeCommand() and MongoDB\Driver\Manager::executeQuery() both return their result(s) as a MongoDB\Driver\Cursor object. This object can be used to iterate over the result set of the command or query.
Because MongoDB\Driver\Cursor implements the Traversable interface, you can simply iterate over the result set with foreach.
<?php
$manager = new MongoDB\Driver\Manager();
/* Insert some documents so that our query returns information */
$bulkWrite = new MongoDB\Driver\BulkWrite;
$bulkWrite->insert(['name' => 'Ceres', 'size' => 946, 'distance' => 2.766]);
$bulkWrite->insert(['name' => 'Vesta', 'size' => 525, 'distance' => 2.362]);
$manager->executeBulkWrite("test.asteroids", $bulkWrite);
/* Query for all the items in the collection */
$query = new MongoDB\Driver\Query( [] );
/* Query the "asteroids" collection of the "test" database */
$cursor = $manager->executeQuery("test.asteroids", $query);
/* $cursor now contains an object that wraps around the result set. Use
* foreach() to iterate over all the result */
foreach($cursor as $document) {
print_r($document);
}
?>
The above example will output something similar to:
stdClass Object
(
[_id] => MongoDB\BSON\ObjectId Object
(
[oid] => 5a4cff2f122d3321565d8cc2
)
[name] => Ceres
[size] => 946
[distance] => 2.766
)
stdClass Object
(
[_id] => MongoDB\BSON\ObjectId Object
(
[oid] => 5a4cff2f122d3321565d8cc3
)
[name] => Vesta
[size] => 525
[distance] => 2.362
}
Example #2 Reading a result set for a tailable cursor
» Tailable cursors are a special type of MongoDB cursor that allows the client to read some results and then wait until more documents become available. These cursors are primarily used with » Capped Collections and » Change Streams.
While normal cursors can be iterated once with foreach, that approach will not work with tailable cursors. When foreach is used with a tailable cursor, the loop will stop upon reaching the end of the initial result set. Attempting to continue iteration on the cursor with a second foreach would throw an exception, since PHP attempts to rewind the cursor. Similar to result objects in other database drivers, cursors in MongoDB only support forward iteration, which means they cannot be rewound.
In order to continuously read from a tailable cursor, the Cursor object must be wrapped with an IteratorIterator. This allows the application to directly control the cursor's iteration, avoid inadvertently rewinding the cursor, and decide when to wait for new results or stop iteration entirely.
In order to demonstrate a tailable cursor in action, two scripts will be used: a "producer" and a "consumer". The producer script will create a new capped collection using the » create command and proceed to insert a new document into that collection each second.
<?php
$manager = new MongoDB\Driver\Manager;
$manager->executeCommand('test', new MongoDB\Driver\Command([
'create' => 'asteroids',
'capped' => true,
'size' => 1048576,
]));
while (true) {
$bulkWrite = new MongoDB\Driver\BulkWrite;
$bulkWrite->insert(['createdAt' => new MongoDB\BSON\UTCDateTime]);
$manager->executeBulkWrite('test.asteroids', $bulkWrite);
sleep(1);
}
?>
With the producer script still running, a second consumer script may be executed to read the inserted documents using a tailable cursor, indicated by the tailable and awaitData options to MongoDB\Driver\Query::__construct().
<?php
$manager = new MongoDB\Driver\Manager;
$query = new MongoDB\Driver\Query([], [
'tailable' => true,
'awaitData' => true,
]);
$cursor = $manager->executeQuery('test.asteroids', $query);
$iterator = new IteratorIterator($cursor);
$iterator->rewind();
while (true) {
if ($iterator->valid()) {
$document = $iterator->current();
printf("Consumed document created at: %s\n", $document->createdAt);
}
$iterator->next();
}
?>
The consumer script will start by quickly printing all available documents in the capped collection (as if foreach had been used); however, it will not terminate upon reaching the end of the initial result set. Since the cursor is tailable, calling IteratorIterator::next() will block and wait for additional results. IteratorIterator::valid() is also used to check if there is actually data available to read at each step.
Note: This example uses the awaitData query option to instruct the server to block for a short period (e.g. one second) at the end of the result set before returning a response to the driver. This is used to prevent the driver from aggressively polling the server when there are no results available. The maxAwaitTimeMS option may be used in conjunction with tailable and awaitData to specify the amount of time that the server should block when it reaches the end of the result set.
Errors/Exceptions
When iterating over the cursor object, BSON data is converted into PHP variables. This iteration can cause the following Exceptions:
- Throws MongoDB\Driver\Exception\InvalidArgumentException if a class in the type map cannot be instantiated or does not implement MongoDB\BSON\Unserializable.
- Throws MongoDB\Driver\Exception\UnexpectedValueException if the input did not contain exactly one BSON document. Possible reasons include, but are not limited to, invalid BSON, extra data (after reading one BSON document), or an unexpected » libbson error.
Table of Contents
- MongoDB\Driver\Cursor::__construct — Create a new Cursor (not used)
- MongoDB\Driver\Cursor::getId — Returns the ID for this cursor
- MongoDB\Driver\Cursor::getServer — Returns the server associated with this cursor
- MongoDB\Driver\Cursor::isDead — Checks if the cursor may have additional results
- MongoDB\Driver\Cursor::setTypeMap — Sets a type map to use for BSON unserialization
- MongoDB\Driver\Cursor::toArray — Returns an array containing all results for this cursor
Vertaling niet beschikbaar
De PHP-handleiding is nog niet in het Nederlands vertaald, dus het scherm is in het Engels. Als u wilt, kunt u het ook in het Frans of in het Duits raadplegen.
Als je de moed voelt, kun je je vertaling aanbieden ;-)
Nederlandse vertaling
U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.
Bij voorbaat dank.
Document heeft de 30/01/2003 gemaakt, de laatste keer de 26/10/2018 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/php-rf-class.mongodb-driver-cursor.html
De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.
Referenties
Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.
