Rechercher dans le manuel MySQL

24.3.1 Trigger Syntax and Examples

Inhoudsopgave

To create a trigger or drop a trigger, use the CREATE TRIGGER or DROP TRIGGER statement, described in Section 13.1.22, “CREATE TRIGGER Syntax”, and Section 13.1.34, “DROP TRIGGER Syntax”.

Here is a simple example that associates a trigger with a table, to activate for INSERT operations. The trigger acts as an accumulator, summing the values inserted into one of the columns of the table.

  1. mysql> CREATE TABLE account (acct_num INT, amount DECIMAL(10,2));
  2. Query OK, 0 rows affected (0.03 sec)
  3.  
  4. mysql> CREATE TRIGGER ins_sum BEFORE INSERT ON account
  5.        FOR EACH ROW SET @sum = @sum + NEW.amount;
  6. Query OK, 0 rows affected (0.01 sec)

The CREATE TRIGGER statement creates a trigger named ins_sum that is associated with the account table. It also includes clauses that specify the trigger action time, the triggering event, and what to do when the trigger activates:

  • The keyword BEFORE indicates the trigger action time. In this case, the trigger activates before each row inserted into the table. The other permitted keyword here is AFTER.

  • The keyword INSERT indicates the trigger event; that is, the type of operation that activates the trigger. In the example, INSERT operations cause trigger activation. You can also create triggers for DELETE and UPDATE operations.

  • The statement following FOR EACH ROW defines the trigger body; that is, the statement to execute each time the trigger activates, which occurs once for each row affected by the triggering event. In the example, the trigger body is a simple SET that accumulates into a user variable the values inserted into the amount column. The statement refers to the column as NEW.amount which means “the value of the amount column to be inserted into the new row.”

To use the trigger, set the accumulator variable to zero, execute an INSERT statement, and then see what value the variable has afterward:

  1. mysql> SET @sum = 0;
  2. mysql> INSERT INTO account VALUES(137,14.98),(141,1937.50),(97,-100.00);
  3. mysql> SELECT @sum AS 'Total amount inserted';
  4. +-----------------------+
  5. | Total amount inserted |
  6. +-----------------------+
  7. |               1852.48 |
  8. +-----------------------+

In this case, the value of @sum after the INSERT statement has executed is 14.98 + 1937.50 - 100, or 1852.48.

To destroy the trigger, use a DROP TRIGGER statement. You must specify the schema name if the trigger is not in the default schema:

  1. mysql> DROP TRIGGER test.ins_sum;

If you drop a table, any triggers for the table are also dropped.

Trigger names exist in the schema namespace, meaning that all triggers must have unique names within a schema. Triggers in different schemas can have the same name.

It is possible to define multiple triggers for a given table that have the same trigger event and action time. For example, you can have two BEFORE UPDATE triggers for a table. By default, triggers that have the same trigger event and action time activate in the order they were created. To affect trigger order, specify a clause after FOR EACH ROW that indicates FOLLOWS or PRECEDES and the name of an existing trigger that also has the same trigger event and action time. With FOLLOWS, the new trigger activates after the existing trigger. With PRECEDES, the new trigger activates before the existing trigger.

For example, the following trigger definition defines another BEFORE INSERT trigger for the account table:

  1. mysql> CREATE TRIGGER ins_transaction BEFORE INSERT ON account
  2.        FOR EACH ROW PRECEDES ins_sum
  3.        SET
  4.        @deposits = @deposits + IF(NEW.amount>0,NEW.amount,0),
  5.        @withdrawals = @withdrawals + IF(NEW.amount<0,-NEW.amount,0);
  6. Query OK, 0 rows affected (0.01 sec)

This trigger, ins_transaction, is similar to ins_sum but accumulates deposits and withdrawals separately. It has a PRECEDES clause that causes it to activate before ins_sum; without that clause, it would activate after ins_sum because it is created after ins_sum.

Within the trigger body, the OLD and NEW keywords enable you to access columns in the rows affected by a trigger. OLD and NEW are MySQL extensions to triggers; they are not case-sensitive.

In an INSERT trigger, only NEW.col_name can be used; there is no old row. In a DELETE trigger, only OLD.col_name can be used; there is no new row. In an UPDATE trigger, you can use OLD.col_name to refer to the columns of a row before it is updated and NEW.col_name to refer to the columns of the row after it is updated.

A column named with OLD is read only. You can refer to it (if you have the SELECT privilege), but not modify it. You can refer to a column named with NEW if you have the SELECT privilege for it. In a BEFORE trigger, you can also change its value with SET NEW.col_name = value if you have the UPDATE privilege for it. This means you can use a trigger to modify the values to be inserted into a new row or used to update a row. (Such a SET statement has no effect in an AFTER trigger because the row change will have already occurred.)

In a BEFORE trigger, the NEW value for an AUTO_INCREMENT column is 0, not the sequence number that is generated automatically when the new row actually is inserted.

By using the BEGIN ... END construct, you can define a trigger that executes multiple statements. Within the BEGIN block, you also can use other syntax that is permitted within stored routines such as conditionals and loops. However, just as for stored routines, if you use the mysql program to define a trigger that executes multiple statements, it is necessary to redefine the mysql statement delimiter so that you can use the ; statement delimiter within the trigger definition. The following example illustrates these points. It defines an UPDATE trigger that checks the new value to be used for updating each row, and modifies the value to be within the range from 0 to 100. This must be a BEFORE trigger because the value must be checked before it is used to update the row:

  1. mysql> delimiter //
  2. mysql> CREATE TRIGGER upd_check BEFORE UPDATE ON account
  3.        FOR EACH ROW
  4.        BEGIN
  5.            IF NEW.amount < 0 THEN
  6.                SET NEW.amount = 0;
  7.            ELSEIF NEW.amount > 100 THEN
  8.                SET NEW.amount = 100;
  9.            END IF;
  10.        END;//
  11. mysql> delimiter ;

It can be easier to define a stored procedure separately and then invoke it from the trigger using a simple CALL statement. This is also advantageous if you want to execute the same code from within several triggers.

There are limitations on what can appear in statements that a trigger executes when activated:

  • The trigger cannot use the CALL statement to invoke stored procedures that return data to the client or that use dynamic SQL. (Stored procedures are permitted to return data to the trigger through OUT or INOUT parameters.)

  • The trigger cannot use statements that explicitly or implicitly begin or end a transaction, such as START TRANSACTION, COMMIT, or ROLLBACK. (ROLLBACK to SAVEPOINT is permitted because it does not end a transaction.).

See also Section C.1, “Restrictions on Stored Programs”.

MySQL handles errors during trigger execution as follows:

  • If a BEFORE trigger fails, the operation on the corresponding row is not performed.

  • A BEFORE trigger is activated by the attempt to insert or modify the row, regardless of whether the attempt subsequently succeeds.

  • An AFTER trigger is executed only if any BEFORE triggers and the row operation execute successfully.

  • An error during either a BEFORE or AFTER trigger results in failure of the entire statement that caused trigger invocation.

  • For transactional tables, failure of a statement should cause rollback of all changes performed by the statement. Failure of a trigger causes the statement to fail, so trigger failure also causes rollback. For nontransactional tables, such rollback cannot be done, so although the statement fails, any changes performed prior to the point of the error remain in effect.

Triggers can contain direct references to tables by name, such as the trigger named testref shown in this example:

  1. CREATE TABLE test1(a1 INT);
  2. CREATE TABLE test2(a2 INT);
  3. CREATE TABLE test3(a3 INT NOT NULL AUTO_INCREMENT PRIMARY KEY);
  4. CREATE TABLE test4(
  5.   a4 INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
  6.   b4 INT DEFAULT 0
  7. );
  8.  
  9. delimiter |
  10.  
  11. CREATE TRIGGER testref BEFORE INSERT ON test1
  12.   FOR EACH ROW
  13.   BEGIN
  14.     INSERT INTO test2 SET a2 = NEW.a1;
  15.     DELETE FROM test3 WHERE a3 = NEW.a1;
  16.     UPDATE test4 SET b4 = b4 + 1 WHERE a4 = NEW.a1;
  17.   END;
  18. |
  19.  
  20. delimiter ;
  21.  
  22. INSERT INTO test3 (a3) VALUES
  23.   (NULL), (NULL), (NULL), (NULL), (NULL),
  24.   (NULL), (NULL), (NULL), (NULL), (NULL);
  25.  
  26. INSERT INTO test4 (a4) VALUES
  27.   (0), (0), (0), (0), (0), (0), (0), (0), (0), (0);

Suppose that you insert the following values into table test1 as shown here:

  1. mysql> INSERT INTO test1 VALUES
  2.        (1), (3), (1), (7), (1), (8), (4), (4);
  3. Query OK, 8 rows affected (0.01 sec)
  4. Records: 8  Duplicates: 0  Warnings: 0

As a result, the four tables contain the following data:

  1. mysql> SELECT * FROM test1;
  2. +------+
  3. | a1   |
  4. +------+
  5. |    1 |
  6. |    3 |
  7. |    1 |
  8. |    7 |
  9. |    1 |
  10. |    8 |
  11. |    4 |
  12. |    4 |
  13. +------+
  14. 8 rows in set (0.00 sec)
  15.  
  16. mysql> SELECT * FROM test2;
  17. +------+
  18. | a2   |
  19. +------+
  20. |    1 |
  21. |    3 |
  22. |    1 |
  23. |    7 |
  24. |    1 |
  25. |    8 |
  26. |    4 |
  27. |    4 |
  28. +------+
  29. 8 rows in set (0.00 sec)
  30.  
  31. mysql> SELECT * FROM test3;
  32. +----+
  33. | a3 |
  34. +----+
  35. |  2 |
  36. |  5 |
  37. |  6 |
  38. |  9 |
  39. | 10 |
  40. +----+
  41. 5 rows in set (0.00 sec)
  42.  
  43. mysql> SELECT * FROM test4;
  44. +----+------+
  45. | a4 | b4   |
  46. +----+------+
  47. |  1 |    3 |
  48. |  2 |    0 |
  49. |  3 |    1 |
  50. |  4 |    2 |
  51. |  5 |    0 |
  52. |  6 |    0 |
  53. |  7 |    1 |
  54. |  8 |    1 |
  55. |  9 |    0 |
  56. | 10 |    0 |
  57. +----+------+
  58. 10 rows in set (0.00 sec)

Zoek in de MySQL-handleiding

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 26/06/2006 gemaakt, de laatste keer de 26/10/2018 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/mysql-rf-trigger-syntax.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

  1. Bekijk - html-document Taal van het document:en Manuel MySQL : https://dev.mysql.com/

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut