org.xml.sax

Interface XMLReader

Inhoudsopgave
  • All Known Subinterfaces:
    XMLFilter
    All Known Implementing Classes:
    ParserAdapter, XMLFilterImpl

    public interface XMLReader
    Interface for reading an XML document using callbacks.
    This module, both source code and documentation, is in the Public Domain, and comes with NO WARRANTY. See http://www.saxproject.org for further information.

    Note: despite its name, this interface does not extend the standard Java Reader interface, because reading XML is a fundamentally different activity than reading character data.

    XMLReader is the interface that an XML parser's SAX2 driver must implement. This interface allows an application to set and query features and properties in the parser, to register event handlers for document processing, and to initiate a document parse.

    All SAX interfaces are assumed to be synchronous: the parse methods must not return until parsing is complete, and readers must wait for an event-handler callback to return before reporting the next event.

    This interface replaces the (now deprecated) SAX 1.0 Parser interface. The XMLReader interface contains two important enhancements over the old Parser interface (as well as some minor ones):

    1. it adds a standard way to query and set features and properties; and
    2. it adds Namespace support, which is required for many higher-level XML standards.

    There are adapters available to convert a SAX1 Parser to a SAX2 XMLReader and vice-versa.

    Since:
    SAX 2.0
    See Also:
    XMLFilter, ParserAdapter, XMLReaderAdapter

    • Method Detail

      • getFeature

        boolean getFeature(String name)
                   throws SAXNotRecognizedException,
                          SAXNotSupportedException
        Look up the value of a feature flag.

        The feature name is any fully-qualified URI. It is possible for an XMLReader to recognize a feature name but temporarily be unable to return its value. Some feature values may be available only in specific contexts, such as before, during, or after a parse. Also, some feature values may not be programmatically accessible. (In the case of an adapter for SAX1 Parser, there is no implementation-independent way to expose whether the underlying parser is performing validation, expanding external entities, and so forth.)

        All XMLReaders are required to recognize the http://xml.org/sax/features/namespaces and the http://xml.org/sax/features/namespace-prefixes feature names.

        Typical usage is something like this:

         XMLReader r = new MySAXDriver();

                         // try to activate validation
 try {
   r.setFeature("http://xml.org/sax/features/validation", true);
 } catch (SAXException e) {
   System.err.println("Cannot activate validation.");
 }

                         // register event handlers
 r.setContentHandler(new MyContentHandler());
 r.setErrorHandler(new MyErrorHandler());

                         // parse the first document
 try {
   r.parse("http://www.foo.com/mydoc.xml");
 } catch (IOException e) {
   System.err.println("I/O exception reading XML document");
 } catch (SAXException e) {
   System.err.println("XML exception reading document.");
 }

        Implementors are free (and encouraged) to invent their own features, using names built on their own URIs.

        Parameters:
        name - The feature name, which is a fully-qualified URI.
        Returns:
        The current value of the feature (true or false).
        Throws:
        SAXNotRecognizedException - If the feature value can't be assigned or retrieved.
        SAXNotSupportedException - When the XMLReader recognizes the feature name but cannot determine its value at this time.
        See Also:
        setFeature(java.lang.String, boolean)

      • setFeature

        void setFeature(String name,
              boolean value)
                throws SAXNotRecognizedException,
                       SAXNotSupportedException
        Set the value of a feature flag.

        The feature name is any fully-qualified URI. It is possible for an XMLReader to expose a feature value but to be unable to change the current value. Some feature values may be immutable or mutable only in specific contexts, such as before, during, or after a parse.

        All XMLReaders are required to support setting http://xml.org/sax/features/namespaces to true and http://xml.org/sax/features/namespace-prefixes to false.

        Parameters:
        name - The feature name, which is a fully-qualified URI.
        value - The requested value of the feature (true or false).
        Throws:
        SAXNotRecognizedException - If the feature value can't be assigned or retrieved.
        SAXNotSupportedException - When the XMLReader recognizes the feature name but cannot set the requested value.
        See Also:
        getFeature(java.lang.String)

      • getProperty

        Object getProperty(String name)
                   throws SAXNotRecognizedException,
                          SAXNotSupportedException
        Look up the value of a property.

        The property name is any fully-qualified URI. It is possible for an XMLReader to recognize a property name but temporarily be unable to return its value. Some property values may be available only in specific contexts, such as before, during, or after a parse.

        XMLReaders are not required to recognize any specific property names, though an initial core set is documented for SAX2.

        Implementors are free (and encouraged) to invent their own properties, using names built on their own URIs.

        Parameters:
        name - The property name, which is a fully-qualified URI.
        Returns:
        The current value of the property.
        Throws:
        SAXNotRecognizedException - If the property value can't be assigned or retrieved.
        SAXNotSupportedException - When the XMLReader recognizes the property name but cannot determine its value at this time.
        See Also:
        setProperty(java.lang.String, java.lang.Object)

      • setProperty

        void setProperty(String name,
               Object value)
                 throws SAXNotRecognizedException,
                        SAXNotSupportedException
        Set the value of a property.

        The property name is any fully-qualified URI. It is possible for an XMLReader to recognize a property name but to be unable to change the current value. Some property values may be immutable or mutable only in specific contexts, such as before, during, or after a parse.

        XMLReaders are not required to recognize setting any specific property names, though a core set is defined by SAX2.

        This method is also the standard mechanism for setting extended handlers.

        Parameters:
        name - The property name, which is a fully-qualified URI.
        value - The requested value for the property.
        Throws:
        SAXNotRecognizedException - If the property value can't be assigned or retrieved.
        SAXNotSupportedException - When the XMLReader recognizes the property name but cannot set the requested value.

      • setEntityResolver

        void setEntityResolver(EntityResolver resolver)
        Allow an application to register an entity resolver.

        If the application does not register an entity resolver, the XMLReader will perform its own default resolution.

        Applications may register a new or different resolver in the middle of a parse, and the SAX parser must begin using the new resolver immediately.

        Parameters:
        resolver - The entity resolver.
        See Also:
        getEntityResolver()

      • setDTDHandler

        void setDTDHandler(DTDHandler handler)
        Allow an application to register a DTD event handler.

        If the application does not register a DTD handler, all DTD events reported by the SAX parser will be silently ignored.

        Applications may register a new or different handler in the middle of a parse, and the SAX parser must begin using the new handler immediately.

        Parameters:
        handler - The DTD handler.
        See Also:
        getDTDHandler()

      • setContentHandler

        void setContentHandler(ContentHandler handler)
        Allow an application to register a content event handler.

        If the application does not register a content handler, all content events reported by the SAX parser will be silently ignored.

        Applications may register a new or different handler in the middle of a parse, and the SAX parser must begin using the new handler immediately.

        Parameters:
        handler - The content handler.
        See Also:
        getContentHandler()

      • setErrorHandler

        void setErrorHandler(ErrorHandler handler)
        Allow an application to register an error event handler.

        If the application does not register an error handler, all error events reported by the SAX parser will be silently ignored; however, normal processing may not continue. It is highly recommended that all SAX applications implement an error handler to avoid unexpected bugs.

        Applications may register a new or different handler in the middle of a parse, and the SAX parser must begin using the new handler immediately.

        Parameters:
        handler - The error handler.
        See Also:
        getErrorHandler()

      • parse

        void parse(InputSource input)
           throws IOException,
                  SAXException
        Parse an XML document.

        The application can use this method to instruct the XML reader to begin parsing an XML document from any valid input source (a character stream, a byte stream, or a URI).

        Applications may not invoke this method while a parse is in progress (they should create a new XMLReader instead for each nested XML document). Once a parse is complete, an application may reuse the same XMLReader object, possibly with a different input source. Configuration of the XMLReader object (such as handler bindings and values established for feature flags and properties) is unchanged by completion of a parse, unless the definition of that aspect of the configuration explicitly specifies other behavior. (For example, feature flags or properties exposing characteristics of the document being parsed.)

        During the parse, the XMLReader will provide information about the XML document through the registered event handlers.

        This method is synchronous: it will not return until parsing has ended. If a client application wants to terminate parsing early, it should throw an exception.

        Parameters:
        input - The input source for the top-level of the XML document.
        Throws:
        SAXException - Any SAX exception, possibly wrapping another exception.
        IOException - An IO exception from the parser, possibly from a byte stream or character stream supplied by the application.
        See Also:
        InputSource, parse(java.lang.String), setEntityResolver(org.xml.sax.EntityResolver), setDTDHandler(org.xml.sax.DTDHandler), setContentHandler(org.xml.sax.ContentHandler), setErrorHandler(org.xml.sax.ErrorHandler)

      • parse

        void parse(String systemId)
           throws IOException,
                  SAXException
        Parse an XML document from a system identifier (URI).

        This method is a shortcut for the common case of reading a document from a system identifier. It is the exact equivalent of the following:

         parse(new InputSource(systemId));

        If the system identifier is a URL, it must be fully resolved by the application before it is passed to the parser.

        Parameters:
        systemId - The system identifier (URI).
        Throws:
        SAXException - Any SAX exception, possibly wrapping another exception.
        IOException - An IO exception from the parser, possibly from a byte stream or character stream supplied by the application.
        See Also:
        parse(org.xml.sax.InputSource)

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-org/xml/sax/xmlreader.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

  1. Bekijk - html-document Taal van het document:fr Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut