All Known Implementing Classes:

DefaultBoundedRangeModel
```
public interface BoundedRangeModel
```
Defines the data model used by components like Sliders and ProgressBars. Defines four interrelated integer properties: minimum, maximum, extent and value. These four integers define two nested ranges like this:
```
 minimum <= value <= value+extent <= maximum
 
```
The outer range is minimum,maximum and the inner range is value,value+extent. The inner range must lie within the outer one, i.e. value must be less than or equal to maximum and value+extent must greater than or equal to minimum, and maximum must be greater than or equal to minimum. There are a few features of this model that one might find a little surprising. These quirks exist for the convenience of the Swing BoundedRangeModel clients, such as Slider and ScrollBar.
- The minimum and maximum set methods "correct" the other three properties to accommodate their new value argument. For example setting the model's minimum may change its maximum, value, and extent properties (in that order), to maintain the constraints specified above.
- The value and extent set methods "correct" their argument to fit within the limits defined by the other three properties. For example if value == maximum, setExtent(10) would change the extent (back) to zero.
- The four BoundedRangeModel values are defined as Java Beans properties however Swing ChangeEvents are used to notify clients of changes rather than PropertyChangeEvents. This was done to keep the overhead of monitoring a BoundedRangeModel low. Changes are often reported at MouseDragged rates.
For an example of specifying custom bounded range models used by sliders, see The Anatomy of a Swing-Based Program in The Java Tutorial.
See Also:
DefaultBoundedRangeModel

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`addChangeListener(ChangeListener x)` Adds a ChangeListener to the model's listener list.
`int`	`getExtent()` Returns the model's extent, the length of the inner range that begins at the model's value.
`int`	`getMaximum()` Returns the model's maximum.
`int`	`getMinimum()` Returns the minimum acceptable value.
`int`	`getValue()` Returns the model's current value.
`boolean`	`getValueIsAdjusting()` Returns true if the current changes to the value property are part of a series of changes.
`void`	`removeChangeListener(ChangeListener x)` Removes a ChangeListener from the model's listener list.
`void`	`setExtent(int newExtent)` Sets the model's extent.
`void`	`setMaximum(int newMaximum)` Sets the model's maximum to newMaximum.
`void`	`setMinimum(int newMinimum)` Sets the model's minimum to newMinimum.
`void`	`setRangeProperties(int value, int extent, int min, int max, boolean adjusting)` This method sets all of the model's data with a single method call.
`void`	`setValue(int newValue)` Sets the model's current value to `newValue` if `newValue` satisfies the model's constraints.
`void`	`setValueIsAdjusting(boolean b)` This attribute indicates that any upcoming changes to the value of the model should be considered a single event.

Eerste pagina van API Java Inhoudsopgave Haut

- Method Detail
  - getMinimum
```
int getMinimum()
```
    Returns the minimum acceptable value.
    
    Returns:
    the value of the minimum property
    See Also:
    setMinimum(int)
  - setMinimum
```
void setMinimum(int newMinimum)
```
    Sets the model's minimum to newMinimum. The other three properties may be changed as well, to ensure that:
```
 minimum <= value <= value+extent <= maximum
 
```
    Notifies any listeners if the model changes.
    Parameters:
    newMinimum - the model's new minimum
    See Also:
    getMinimum(), addChangeListener(javax.swing.event.ChangeListener)
  - getMaximum
```
int getMaximum()
```
    Returns the model's maximum. Note that the upper limit on the model's value is (maximum - extent).
    
    Returns:
    the value of the maximum property.
    See Also:
    setMaximum(int), setExtent(int)
  - setMaximum
```
void setMaximum(int newMaximum)
```
    Sets the model's maximum to newMaximum. The other three properties may be changed as well, to ensure that
```
 minimum <= value <= value+extent <= maximum
 
```
    Notifies any listeners if the model changes.
    Parameters:
    newMaximum - the model's new maximum
    See Also:
    getMaximum(), addChangeListener(javax.swing.event.ChangeListener)
  - getValue
```
int getValue()
```
    Returns the model's current value. Note that the upper limit on the model's value is maximum - extent and the lower limit is minimum.
    
    Returns:
    the model's value
    See Also:
    setValue(int)
  - setValue
```
void setValue(int newValue)
```
    Sets the model's current value to newValue if newValue satisfies the model's constraints. Those constraints are:
```
 minimum <= value <= value+extent <= maximum
 
```
    Otherwise, if newValue is less than minimum it's set to minimum, if its greater than maximum then it's set to maximum, and if it's greater than value+extent then it's set to value+extent.
    When a BoundedRange model is used with a scrollbar the value specifies the origin of the scrollbar knob (aka the "thumb" or "elevator"). The value usually represents the origin of the visible part of the object being scrolled.
    Notifies any listeners if the model changes.
    Parameters:
    newValue - the model's new value
    See Also:
    getValue()
  - setValueIsAdjusting
```
void setValueIsAdjusting(boolean b)
```
    This attribute indicates that any upcoming changes to the value of the model should be considered a single event. This attribute will be set to true at the start of a series of changes to the value, and will be set to false when the value has finished changing. Normally this allows a listener to only take action when the final value change in committed, instead of having to do updates for all intermediate values.
    Sliders and scrollbars use this property when a drag is underway.
    
    Parameters:
    b - true if the upcoming changes to the value property are part of a series
  - getValueIsAdjusting
```
boolean getValueIsAdjusting()
```
    Returns true if the current changes to the value property are part of a series of changes.
    
    Returns:
    the valueIsAdjustingProperty.
    See Also:
    setValueIsAdjusting(boolean)
  - getExtent
```
int getExtent()
```
    Returns the model's extent, the length of the inner range that begins at the model's value.
    
    Returns:
    the value of the model's extent property
    See Also:
    setExtent(int), setValue(int)
  - setExtent
```
void setExtent(int newExtent)
```
    Sets the model's extent. The newExtent is forced to be greater than or equal to zero and less than or equal to maximum - value.
    When a BoundedRange model is used with a scrollbar the extent defines the length of the scrollbar knob (aka the "thumb" or "elevator"). The extent usually represents how much of the object being scrolled is visible. When used with a slider, the extent determines how much the value can "jump", for example when the user presses PgUp or PgDn.
    Notifies any listeners if the model changes.
    
    Parameters:
    newExtent - the model's new extent
    See Also:
    getExtent(), setValue(int)
  - setRangeProperties
```
void setRangeProperties(int value,
                      int extent,
                      int min,
                      int max,
                      boolean adjusting)
```
    This method sets all of the model's data with a single method call. The method results in a single change event being generated. This is convenient when you need to adjust all the model data simultaneously and do not want individual change events to occur.
    
    Parameters:
    value - an int giving the current value
    extent - an int giving the amount by which the value can "jump"
    min - an int giving the minimum value
    max - an int giving the maximum value
    adjusting - a boolean, true if a series of changes are in progress
    See Also:
    setValue(int), setExtent(int), setMinimum(int), setMaximum(int), setValueIsAdjusting(boolean)
  - addChangeListener
```
void addChangeListener(ChangeListener x)
```
    Adds a ChangeListener to the model's listener list.
    
    Parameters:
    x - the ChangeListener to add
    See Also:
    removeChangeListener(javax.swing.event.ChangeListener)
  - removeChangeListener
```
void removeChangeListener(ChangeListener x)
```
    Removes a ChangeListener from the model's listener list.
    
    Parameters:
    x - the ChangeListener to remove
    See Also:
    addChangeListener(javax.swing.event.ChangeListener)

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-javax/swing/boundedrangemodel.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut

Interface BoundedRangeModel

Method Summary

Method Detail

getMinimum

setMinimum

getMaximum

setMaximum

getValue

setValue

setValueIsAdjusting

getValueIsAdjusting

getExtent

setExtent

setRangeProperties

addChangeListener

removeChangeListener

Referenties