-
- All Superinterfaces:
- AutoCloseable, Line
- All Known Subinterfaces:
- Clip, SourceDataLine, TargetDataLine
public interface DataLine extends Line
DataLine
adds media-related functionality to its superinterface,
. This functionality includes transport-control methods that start, stop, drain, and flush the audio data that passes through the line. A data line can also report the current position, volume, and audio format of the media. Data lines are used for output of audio by means of the subinterfacesLine
orSourceDataLine
, which allow an application program to write data. Similarly, audio input is handled by the subinterfaceClip
, which allows data to be read.TargetDataLine
A data line has an internal buffer in which the incoming or outgoing audio data is queued. The
method blocks until this internal buffer becomes empty, usually because all queued data has been processed. Thedrain()
method discards any available queued data from the internal buffer.flush()
A data line produces
andSTART
events whenever it begins or ceases active presentation or capture of data. These events can be generated in response to specific requests, or as a result of less direct state changes. For example, ifSTOP
is called on an inactive data line, and data is available for capture or playback, astart()
START
event will be generated shortly, when data playback or capture actually begins. Or, if the flow of data to an active data line is constricted so that a gap occurs in the presentation of data, aSTOP
event is generated.Mixers often support synchronized control of multiple data lines. Synchronization can be established through the Mixer interface's
method. See the description of thesynchronize
interface for a more complete description.Mixer
- Since:
- 1.3
- See Also:
LineEvent
-
-
Nested Class Summary
Nested Classes Modifier and Type Interface and Description static class
DataLine.Info
Besides the class information inherited from its superclass,DataLine.Info
provides additional information specific to data lines.
-
Method Summary
Methods Modifier and Type Method and Description int
available()
Obtains the number of bytes of data currently available to the application for processing in the data line's internal buffer.void
drain()
Drains queued data from the line by continuing data I/O until the data line's internal buffer has been emptied.void
flush()
Flushes queued data from the line.int
getBufferSize()
Obtains the maximum number of bytes of data that will fit in the data line's internal buffer.AudioFormat
getFormat()
Obtains the current format (encoding, sample rate, number of channels, etc.) of the data line's audio data.int
getFramePosition()
Obtains the current position in the audio data, in sample frames.float
getLevel()
Obtains the current volume level for the line.long
getLongFramePosition()
Obtains the current position in the audio data, in sample frames.long
getMicrosecondPosition()
Obtains the current position in the audio data, in microseconds.boolean
isActive()
Indicates whether the line is engaging in active I/O (such as playback or capture).boolean
isRunning()
Indicates whether the line is running.void
start()
Allows a line to engage in data I/O.void
stop()
Stops the line.-
Methods inherited from interface javax.sound.sampled.Line
addLineListener, close, getControl, getControls, getLineInfo, isControlSupported, isOpen, open, removeLineListener
-
-
-
-
Method Detail
-
drain
void drain()
Drains queued data from the line by continuing data I/O until the data line's internal buffer has been emptied. This method blocks until the draining is complete. Because this is a blocking method, it should be used with care. Ifdrain()
is invoked on a stopped line that has data in its queue, the method will block until the line is running and the data queue becomes empty. Ifdrain()
is invoked by one thread, and another continues to fill the data queue, the operation will not complete. This method always returns when the data line is closed.- See Also:
flush()
-
flush
void flush()
Flushes queued data from the line. The flushed data is discarded. In some cases, not all queued data can be discarded. For example, a mixer can flush data from the buffer for a specific input line, but any unplayed data already in the output buffer (the result of the mix) will still be played. You can invoke this method after pausing a line (the normal case) if you want to skip the "stale" data when you restart playback or capture. (It is legal to flush a line that is not stopped, but doing so on an active line is likely to cause a discontinuity in the data, resulting in a perceptible click.)
-
start
void start()
Allows a line to engage in data I/O. If invoked on a line that is already running, this method does nothing. Unless the data in the buffer has been flushed, the line resumes I/O starting with the first frame that was unprocessed at the time the line was stopped. When audio capture or playback starts, a
event is generated.START
- See Also:
stop()
,isRunning()
,LineEvent
-
stop
void stop()
Stops the line. A stopped line should cease I/O activity. If the line is open and running, however, it should retain the resources required to resume activity. A stopped line should retain any audio data in its buffer instead of discarding it, so that upon resumption the I/O can continue where it left off, if possible. (This doesn't guarantee that there will never be discontinuities beyond the current buffer, of course; if the stopped condition continues for too long, input or output samples might be dropped.) If desired, the retained data can be discarded by invoking theflush
method. When audio capture or playback stops, a
event is generated.STOP
- See Also:
start()
,isRunning()
,flush()
,LineEvent
-
isRunning
boolean isRunning()
Indicates whether the line is running. The default isfalse
. An open line begins running when the first data is presented in response to an invocation of thestart
method, and continues until presentation ceases in response to a call tostop
or because playback completes.
-
isActive
boolean isActive()
Indicates whether the line is engaging in active I/O (such as playback or capture). When an inactive line becomes active, it sends a
event to its listeners. Similarly, when an active line becomes inactive, it sends aSTART
event.STOP
- Returns:
true
if the line is actively capturing or rendering sound, otherwisefalse
- See Also:
Line.isOpen()
,Line.addLineListener(javax.sound.sampled.LineListener)
,Line.removeLineListener(javax.sound.sampled.LineListener)
,LineEvent
,LineListener
-
getFormat
AudioFormat getFormat()
Obtains the current format (encoding, sample rate, number of channels, etc.) of the data line's audio data.If the line is not open and has never been opened, it returns the default format. The default format is an implementation specific audio format, or, if the
DataLine.Info
object, which was used to retrieve thisDataLine
, specifies at least one fully qualified audio format, the last one will be used as the default format. Opening the line with a specific audio format (e.g.SourceDataLine.open(AudioFormat)
) will override the default format.- Returns:
- current audio data format
- See Also:
AudioFormat
-
getBufferSize
int getBufferSize()
Obtains the maximum number of bytes of data that will fit in the data line's internal buffer. For a source data line, this is the size of the buffer to which data can be written. For a target data line, it is the size of the buffer from which data can be read. Note that the units used are bytes, but will always correspond to an integral number of sample frames of audio data.- Returns:
- the size of the buffer in bytes
-
available
int available()
Obtains the number of bytes of data currently available to the application for processing in the data line's internal buffer. For a source data line, this is the amount of data that can be written to the buffer without blocking. For a target data line, this is the amount of data available to be read by the application. For a clip, this value is always 0 because the audio data is loaded into the buffer when the clip is opened, and persists without modification until the clip is closed.Note that the units used are bytes, but will always correspond to an integral number of sample frames of audio data.
An application is guaranteed that a read or write operation of up to the number of bytes returned from
available()
will not block; however, there is no guarantee that attempts to read or write more data will block.- Returns:
- the amount of data available, in bytes
-
getFramePosition
int getFramePosition()
Obtains the current position in the audio data, in sample frames. The frame position measures the number of sample frames captured by, or rendered from, the line since it was opened. This return value will wrap around after 2^31 frames. It is recommended to usegetLongFramePosition
instead.- Returns:
- the number of frames already processed since the line was opened
- See Also:
getLongFramePosition()
-
getLongFramePosition
long getLongFramePosition()
Obtains the current position in the audio data, in sample frames. The frame position measures the number of sample frames captured by, or rendered from, the line since it was opened.- Returns:
- the number of frames already processed since the line was opened
- Since:
- 1.5
-
getMicrosecondPosition
long getMicrosecondPosition()
Obtains the current position in the audio data, in microseconds. The microsecond position measures the time corresponding to the number of sample frames captured by, or rendered from, the line since it was opened. The level of precision is not guaranteed. For example, an implementation might calculate the microsecond position from the current frame position and the audio sample frame rate. The precision in microseconds would then be limited to the number of microseconds per sample frame.- Returns:
- the number of microseconds of data processed since the line was opened
-
getLevel
float getLevel()
Obtains the current volume level for the line. This level is a measure of the signal's current amplitude, and should not be confused with the current setting of a gain control. The range is from 0.0 (silence) to 1.0 (maximum possible amplitude for the sound waveform). The units measure linear amplitude, not decibels.- Returns:
- the current amplitude of the signal in this line, or
AudioSystem.NOT_SPECIFIED
-
-
Nederlandse vertaling
U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.
Bij voorbaat dank.
Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-javax/sound/sampled/DataLine.html
De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.
Referenties
Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.