javax.print.attribute.standard

Class PrinterStateReason

Inhoudsopgave
  • All Implemented Interfaces:
    Serializable, Cloneable, Attribute

    public class PrinterStateReason
extends EnumSyntax
implements Attribute
    Class PrinterStateReason is a printing attribute class, an enumeration, that provides additional information about the printer's current state, i.e., information that augments the value of the printer's PrinterState attribute. Class PrinterStateReason defines standard printer state reason values. A Print Service implementation only needs to report those printer state reasons which are appropriate for the particular implementation; it does not have to report every defined printer state reason.

    Instances of PrinterStateReason do not appear in a Print Service's attribute set directly. Rather, a PrinterStateReasons attribute appears in the Print Service's attribute set. The PrinterStateReasons attribute contains zero, one, or more than one PrinterStateReason objects which pertain to the Print Service's status, and each PrinterStateReason object is associated with a Severity level of REPORT (least severe), WARNING, or ERROR (most severe). The printer adds a PrinterStateReason object to the Print Service's PrinterStateReasons attribute when the corresponding condition becomes true of the printer, and the printer removesthe PrinterStateReason object again when the corresponding condition becomes false, regardless of whether the Print Service's overall PrinterState also changed.

    IPP Compatibility: The string values returned by each individual PrinterStateReason and associated Severity object's toString() methods, concatenated together with a hyphen ("-") in between, gives the IPP keyword value for a PrinterStateReasons. The category name returned by getName() gives the IPP attribute name.

    See Also:
    Serialized Form

    • Field Detail

      • OTHER

        public static final PrinterStateReason OTHER
        The printer has detected an error other than ones listed below.

      • MEDIA_NEEDED

        public static final PrinterStateReason MEDIA_NEEDED
        A tray has run out of media.

      • MOVING_TO_PAUSED

        public static final PrinterStateReason MOVING_TO_PAUSED
        Someone has paused the printer, but the device(s) are taking an appreciable time to stop. Later, when all output has stopped, the PrinterState becomes STOPPED, and the PAUSED value replaces the MOVING_TO_PAUSED value in the PrinterStateReasons attribute. This value must be supported if the printer can be paused and the implementation takes significant time to pause a device in certain circumstances.

      • PAUSED

        public static final PrinterStateReason PAUSED
        Someone has paused the printer and the printer's PrinterState is STOPPED. In this state, a printer must not produce printed output, but it must perform other operations requested by a client. If a printer had been printing a job when the printer was paused, the Printer must resume printing that job when the printer is no longer paused and leave no evidence in the printed output of such a pause. This value must be supported if the printer can be paused.

      • SHUTDOWN

        public static final PrinterStateReason SHUTDOWN
        Someone has removed a printer from service, and the device may be powered down or physically removed. In this state, a printer must not produce printed output, and unless the printer is realized by a print server that is still active, the printer must perform no other operations requested by a client. If a printer had been printing a job when it was shut down, the printer need not resume printing that job when the printer is no longer shut down. If the printer resumes printing such a job, it may leave evidence in the printed output of such a shutdown, e.g. the part printed before the shutdown may be printed a second time after the shutdown.

      • CONNECTING_TO_DEVICE

        public static final PrinterStateReason CONNECTING_TO_DEVICE
        The printer has scheduled a job on the output device and is in the process of connecting to a shared network output device (and might not be able to actually start printing the job for an arbitrarily long time depending on the usage of the output device by other servers on the network).

      • TIMED_OUT

        public static final PrinterStateReason TIMED_OUT
        The server was able to connect to the output device (or is always connected), but was unable to get a response from the output device.

      • STOPPING

        public static final PrinterStateReason STOPPING
        The printer is in the process of stopping the device and will be stopped in a while. When the device is stopped, the printer will change the PrinterState to STOPPED. The STOPPING reason is never an error, even for a printer with a single output device. When an output device ceases accepting jobs, the printer's PrinterStateReasons will have this reason while the output device completes printing.

      • STOPPED_PARTLY

        public static final PrinterStateReason STOPPED_PARTLY
        When a printer controls more than one output device, this reason indicates that one or more output devices are stopped. If the reason's severity is a report, fewer than half of the output devices are stopped. If the reason's severity is a warning, half or more but fewer than all of the output devices are stopped.

      • TONER_EMPTY

        public static final PrinterStateReason TONER_EMPTY
        The device is out of toner.

      • SPOOL_AREA_FULL

        public static final PrinterStateReason SPOOL_AREA_FULL
        The limit of persistent storage allocated for spooling has been reached. The printer is temporarily unable to accept more jobs. The printer will remove this reason when it is able to accept more jobs. This value should be used by a non-spooling printer that only accepts one or a small number jobs at a time or a spooling printer that has filled the spool space.

      • COVER_OPEN

        public static final PrinterStateReason COVER_OPEN
        One or more covers on the device are open.

      • INTERLOCK_OPEN

        public static final PrinterStateReason INTERLOCK_OPEN
        One or more interlock devices on the printer are unlocked.

      • DOOR_OPEN

        public static final PrinterStateReason DOOR_OPEN
        One or more doors on the device are open.

      • INPUT_TRAY_MISSING

        public static final PrinterStateReason INPUT_TRAY_MISSING
        One or more input trays are not in the device.

      • MEDIA_LOW

        public static final PrinterStateReason MEDIA_LOW
        At least one input tray is low on media.

      • MEDIA_EMPTY

        public static final PrinterStateReason MEDIA_EMPTY
        At least one input tray is empty.

      • OUTPUT_TRAY_MISSING

        public static final PrinterStateReason OUTPUT_TRAY_MISSING
        One or more output trays are not in the device.

      • OUTPUT_AREA_ALMOST_FULL

        public static final PrinterStateReason OUTPUT_AREA_ALMOST_FULL
        One or more output areas are almost full (e.g. tray, stacker, collator).

      • OUTPUT_AREA_FULL

        public static final PrinterStateReason OUTPUT_AREA_FULL
        One or more output areas are full (e.g. tray, stacker, collator).

      • MARKER_SUPPLY_LOW

        public static final PrinterStateReason MARKER_SUPPLY_LOW
        The device is low on at least one marker supply (e.g. toner, ink, ribbon).

      • MARKER_SUPPLY_EMPTY

        public static final PrinterStateReason MARKER_SUPPLY_EMPTY
        The device is out of at least one marker supply (e.g. toner, ink, ribbon).

      • MARKER_WASTE_ALMOST_FULL

        public static final PrinterStateReason MARKER_WASTE_ALMOST_FULL
        The device marker supply waste receptacle is almost full.

      • MARKER_WASTE_FULL

        public static final PrinterStateReason MARKER_WASTE_FULL
        The device marker supply waste receptacle is full.

      • FUSER_OVER_TEMP

        public static final PrinterStateReason FUSER_OVER_TEMP
        The fuser temperature is above normal.

      • FUSER_UNDER_TEMP

        public static final PrinterStateReason FUSER_UNDER_TEMP
        The fuser temperature is below normal.

      • OPC_NEAR_EOL

        public static final PrinterStateReason OPC_NEAR_EOL
        The optical photo conductor is near end of life.

      • OPC_LIFE_OVER

        public static final PrinterStateReason OPC_LIFE_OVER
        The optical photo conductor is no longer functioning.

      • DEVELOPER_LOW

        public static final PrinterStateReason DEVELOPER_LOW
        The device is low on developer.

      • DEVELOPER_EMPTY

        public static final PrinterStateReason DEVELOPER_EMPTY
        The device is out of developer.

      • INTERPRETER_RESOURCE_UNAVAILABLE

        public static final PrinterStateReason INTERPRETER_RESOURCE_UNAVAILABLE
        An interpreter resource is unavailable (e.g., font, form).

    • Constructor Detail

      • PrinterStateReason

        protected PrinterStateReason(int value)
        Construct a new printer state reason enumeration value with the given integer value.
        Parameters:
        value - Integer value.

    • Method Detail

      • getStringTable

        protected String[] getStringTable()
        Returns the string table for class PrinterStateReason.
        Overrides:
        getStringTable in class EnumSyntax
        Returns:
        the string table

      • getEnumValueTable

        protected EnumSyntax[] getEnumValueTable()
        Returns the enumeration value table for class PrinterStateReason.
        Overrides:
        getEnumValueTable in class EnumSyntax
        Returns:
        the value table

      • getCategory

        public final Class<? extends Attribute> getCategory()
        Get the printing attribute class which is to be used as the "category" for this printing attribute value.

        For class PrinterStateReason and any vendor-defined subclasses, the category is class PrinterStateReason itself.

        Specified by:
        getCategory in interface Attribute
        Returns:
        Printing attribute class (category), an instance of class java.lang.Class.

      • getName

        public final String getName()
        Get the name of the category of which this attribute value is an instance.

        For class PrinterStateReason and any vendor-defined subclasses, the category name is "printer-state-reason".

        Specified by:
        getName in interface Attribute
        Returns:
        Attribute category name.

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-javax/print/attribute/standard/PrinterStateReason.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

  1. Bekijk - html-document Taal van het document:fr Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut