All Superinterfaces:: Cloneable, Serializable

All Known Implementing Classes:: DescriptorSupport, ImmutableDescriptor

public interface Descriptor
extends Serializable, Cloneable

Additional metadata for a JMX element. A Descriptor is associated with a MBeanInfo, MBeanAttributeInfo, etc. It consists of a collection of fields. A field is a name and an associated value.

Field names are not case-sensitive. The names descriptorType, descriptortype, and DESCRIPTORTYPE are all equivalent. However, the case that was used when the field was first set is preserved in the result of the getFields() and getFieldNames() methods.

Not all field names and values are predefined. New fields can be defined and added by any program.

A descriptor can be mutable or immutable. An immutable descriptor, once created, never changes. The Descriptor methods that could modify the contents of the descriptor will throw an exception for an immutable descriptor. Immutable descriptors are usually instances of ImmutableDescriptor or a subclass. Mutable descriptors are usually instances of DescriptorSupport or a subclass.

Certain fields are used by the JMX implementation. This means either that the presence of the field may change the behavior of the JMX API or that the field may be set in descriptors returned by the JMX API. These fields appear in italics in the table below, and each one has a corresponding constant in the JMX class. For example, the field defaultValue is represented by the constant JMX.DEFAULT_VALUE_FIELD.

Certain other fields have conventional meanings described in the table below but they are not required to be understood or set by the JMX implementation.

Field names defined by the JMX specification in this and all future versions will never contain a period (.). Users can safely create their own fields by including a period in the name and be sure that these names will not collide with any future version of the JMX API. It is recommended to follow the Java package naming convention to avoid collisions between field names from different origins. For example, a field created by example.com might have the name com.example.interestLevel.

Note that the values in the defaultValue, legalValues, maxValue, and minValue fields should be consistent with the type returned by the getType() method for the associated MBeanAttributeInfo or MBeanParameterInfo. For MXBeans, this means that they should be of the mapped Java type, called opendata(J) in the MXBean type mapping rules.

Name	Type	Used in	Meaning
defaultValue	Object	MBeanAttributeInfo MBeanParameterInfo	Default value for an attribute or parameter. See `javax.management.openmbean`.
deprecated	String	Any	An indication that this element of the information model is no longer recommended for use. A set of MBeans defined by an application is collectively called an information model. The convention is for the value of this field to contain a string that is the version of the model in which the element was first deprecated, followed by a space, followed by an explanation of the deprecation, for example `"1.3 Replaced by the Capacity attribute"`.
descriptionResource BundleBaseName	String	Any	The base name for the `ResourceBundle` in which the key given in the `descriptionResourceKey` field can be found, for example `"com.example.myapp.MBeanResources"`. The meaning of this field is defined by this specification but the field is not set or used by the JMX API itself.
descriptionResourceKey	String	Any	A resource key for the description of this element. In conjunction with the `descriptionResourceBundleBaseName`, this can be used to find a localized version of the description. The meaning of this field is defined by this specification but the field is not set or used by the JMX API itself.
enabled	String	MBeanAttributeInfo MBeanNotificationInfo MBeanOperationInfo	The string `"true"` or `"false"` according as this item is enabled. When an attribute or operation is not enabled, it exists but cannot currently be accessed. A user interface might present it as a greyed-out item. For example, an attribute might only be meaningful after the `start()` method of an MBean has been called, and is otherwise disabled. Likewise, a notification might be disabled if it cannot currently be emitted but could be in other circumstances.
exceptions	String[]	MBeanAttributeInfo, MBeanConstructorInfo, MBeanOperationInfo	The class names of the exceptions that can be thrown when invoking a constructor or operation, or getting an attribute. The meaning of this field is defined by this specification but the field is not set or used by the JMX API itself. Exceptions thrown when setting an attribute are specified by the field `setExceptions`.
immutableInfo	String	MBeanInfo	The string `"true"` or `"false"` according as this MBean's MBeanInfo is immutable. When this field is true, the MBeanInfo for the given MBean is guaranteed not to change over the lifetime of the MBean. Hence, a client can read it once and cache the read value. When this field is false or absent, there is no such guarantee, although that does not mean that the MBeanInfo will necessarily change. See also the `"jmx.mbean.info.changed"` notification.
infoTimeout	String Long	MBeanInfo	The time in milli-seconds that the MBeanInfo can reasonably be expected to be unchanged. The value can be a `Long` or a decimal string. This provides a hint from a DynamicMBean or any MBean that does not define `immutableInfo` as `true` that the MBeanInfo is not likely to change within this period and therefore can be cached. When this field is missing or has the value zero, it is not recommended to cache the MBeanInfo unless it has the `immutableInfo` set to `true` or it has `"jmx.mbean.info.changed"` in its `MBeanNotificationInfo` array.
interfaceClassName	String	MBeanInfo	The Java interface name for a Standard MBean or MXBean, as returned by `Class.getName()`. A Standard MBean or MXBean registered directly in the MBean Server or created using the `StandardMBean` class will have this field in its MBeanInfo Descriptor.
legalValues	Set<?>	MBeanAttributeInfo MBeanParameterInfo	Legal values for an attribute or parameter. See `javax.management.openmbean`.
locale	String	Any	The locale of the description in this `MBeanInfo`, `MBeanAttributeInfo`, etc, as returned by `Locale.toString()`.
maxValue	Object	MBeanAttributeInfo MBeanParameterInfo	Maximum legal value for an attribute or parameter. See `javax.management.openmbean`.
metricType	String	MBeanAttributeInfo MBeanOperationInfo	The type of a metric, one of the strings "counter" or "gauge". A metric is a measurement exported by an MBean, usually an attribute but sometimes the result of an operation. A metric that is a counter has a value that never decreases except by being reset to a starting value. Counter metrics are almost always non-negative integers. An example might be the number of requests received. A metric that is a gauge has a numeric value that can increase or decrease. Examples might be the number of open connections or a cache hit rate or a temperature reading.
minValue	Object	MBeanAttributeInfo MBeanParameterInfo	Minimum legal value for an attribute or parameter. See `javax.management.openmbean`.
mxbean	String	MBeanInfo	The string `"true"` or `"false"` according as this MBean is an `MXBean`. A Standard MBean or MXBean registered directly with the MBean Server or created using the `StandardMBean` class will have this field in its MBeanInfo Descriptor.
openType	`OpenType`	MBeanAttributeInfo MBeanOperationInfo MBeanParameterInfo	The Open Type of this element. In the case of `MBeanAttributeInfo` and `MBeanParameterInfo`, this is the Open Type of the attribute or parameter. In the case of `MBeanOperationInfo`, it is the Open Type of the return value. This field is set in the Descriptor for all instances of `OpenMBeanAttributeInfoSupport`, `OpenMBeanOperationInfoSupport`, and `OpenMBeanParameterInfoSupport`. It is also set for attributes, operations, and parameters of MXBeans. This field can be set for an `MBeanNotificationInfo`, in which case it indicates the Open Type that the `user data` will have.
originalType	String	MBeanAttributeInfo MBeanOperationInfo MBeanParameterInfo	The original Java type of this element as it appeared in the `MXBean` interface method that produced this `MBeanAttributeInfo` (etc). For example, a method `public` `MemoryUsage` `getHeapMemoryUsage();` in an MXBean interface defines an attribute called `HeapMemoryUsage` of type `CompositeData`. The `originalType` field in the Descriptor for this attribute will have the value `"java.lang.management.MemoryUsage"`. The format of this string is described in the section Type Names of the MXBean specification.
setExceptions	String[]	MBeanAttributeInfo	The class names of the exceptions that can be thrown when setting an attribute. The meaning of this field is defined by this specification but the field is not set or used by the JMX API itself. Exceptions thrown when getting an attribute are specified by the field `exceptions`.
severity	String Integer	MBeanNotificationInfo	The severity of this notification. It can be 0 to mean unknown severity or a value from 1 to 6 representing decreasing levels of severity. It can be represented as a decimal string or an `Integer`.
since	String	Any	The version of the information model in which this element was introduced. A set of MBeans defined by an application is collectively called an information model. The application may also define versions of this model, and use the `"since"` field to record the version in which an element first appeared.
units	String	MBeanAttributeInfo MBeanParameterInfo MBeanOperationInfo	The units in which an attribute, parameter, or operation return value is measured, for example `"bytes"` or `"seconds"`.

Eerste pagina van API Java Inhoudsopgave Haut

Some additional fields are defined by Model MBeans. See the information for ModelMBeanInfo, ModelMBeanAttributeInfo, ModelMBeanConstructorInfo, ModelMBeanNotificationInfo, and ModelMBeanOperationInfo, as well as the chapter "Model MBeans" of the JMX Specification. The following table summarizes these fields. Note that when the Type in this table is Number, a String that is the decimal representation of a Long can also be used.

Nothing prevents the use of these fields in MBeans that are not Model MBeans. The displayName, severity, and visibility fields are of interest outside Model MBeans, for example. But only Model MBeans have a predefined behavior for these fields.

Name	Type	Used in	Meaning
class	String	ModelMBeanOperationInfo	Class where method is defined (fully qualified).
currencyTimeLimit	Number	ModelMBeanInfo ModelMBeanAttributeInfo ModelMBeanOperationInfo	How long cached value is valid: <0 never, =0 always, >0 seconds.
default	Object	ModelMBeanAttributeInfo	Default value for attribute.
descriptorType	String	Any	Type of descriptor, "mbean", "attribute", "constructor", "operation", or "notification".
displayName	String	Any	Human readable name of this item.
export	String	ModelMBeanInfo	Name to be used to export/expose this MBean so that it is findable by other JMX Agents.
getMethod	String	ModelMBeanAttributeInfo	Name of operation descriptor for get method.
lastUpdatedTimeStamp	Number	ModelMBeanAttributeInfo ModelMBeanOperationInfo	When value was set.
log	String	ModelMBeanInfo ModelMBeanNotificationInfo	t or T: log all notifications, f or F: log no notifications.
logFile	String	ModelMBeanInfo ModelMBeanNotificationInfo	Fully qualified filename to log events to.
messageID	String	ModelMBeanNotificationInfo	Unique key for message text (to allow translation, analysis).
messageText	String	ModelMBeanNotificationInfo	Text of notification.
name	String	Any	Name of this item.
persistFile	String	ModelMBeanInfo	File name into which the MBean should be persisted.
persistLocation	String	ModelMBeanInfo	The fully qualified directory name where the MBean should be persisted (if appropriate).
persistPeriod	Number	ModelMBeanInfo ModelMBeanAttributeInfo	Frequency of persist cycle in seconds. Used when persistPolicy is "OnTimer" or "NoMoreOftenThan".
persistPolicy	String	ModelMBeanInfo ModelMBeanAttributeInfo	One of: OnUpdate\|OnTimer\|NoMoreOftenThan\|OnUnregister\|Always\|Never. See the section "MBean Descriptor Fields" in the JMX specification document.
presentationString	String	Any	XML formatted string to allow presentation of data.
protocolMap	Descriptor	ModelMBeanAttributeInfo	See the section "Protocol Map Support" in the JMX specification document. Mappings must be appropriate for the attribute and entries can be updated or augmented at runtime.
role	String	ModelMBeanConstructorInfo ModelMBeanOperationInfo	One of "constructor", "operation", "getter", or "setter".
setMethod	String	ModelMBeanAttributeInfo	Name of operation descriptor for set method.
severity	Number	ModelMBeanNotificationInfo	0-6 where 0: unknown; 1: non-recoverable; 2: critical, failure; 3: major, severe; 4: minor, marginal, error; 5: warning; 6: normal, cleared, informative
targetObject	Object	ModelMBeanOperationInfo	Object on which to execute this method.
targetType	String	ModelMBeanOperationInfo	type of object reference for targetObject. Can be: ObjectReference \| Handle \| EJBHandle \| IOR \| RMIReference.
value	Object	ModelMBeanAttributeInfo ModelMBeanOperationInfo	Current (cached) value for attribute or operation.
visibility	Number	Any	1-4 where 1: always visible, 4: rarely visible.

Eerste pagina van API Java Inhoudsopgave Haut

Since:: 1.5

Method Summary

Methods
Modifier and Type	Method and Description
`Object`	`clone()` Returns a descriptor which is equal to this descriptor.
`boolean`	`equals(Object obj)` Compares this descriptor to the given object.
`String[]`	`getFieldNames()` Returns all the field names in the descriptor.
`String[]`	`getFields()` Returns all of the fields contained in this descriptor as a string array.
`Object`	`getFieldValue(String fieldName)` Returns the value for a specific field name, or null if no value is present for that name.
`Object[]`	`getFieldValues(String... fieldNames)` Returns all the field values in the descriptor as an array of Objects.
`int`	`hashCode()` Returns the hash code value for this descriptor.
`boolean`	`isValid()` Returns true if all of the fields have legal values given their names.
`void`	`removeField(String fieldName)` Removes a field from the descriptor.
`void`	`setField(String fieldName, Object fieldValue)` Sets the value for a specific field name.
`void`	`setFields(String[] fieldNames, Object[] fieldValues)` Sets all fields in the field names array to the new value with the same index in the field values array.

Eerste pagina van API Java Inhoudsopgave Haut

- Method Detail
  - getFieldValue
```
Object getFieldValue(String fieldName)
                     throws RuntimeOperationsException
```
    Returns the value for a specific field name, or null if no value is present for that name.
    
    Parameters:
    fieldName - the field name.
    
    Returns:
    the corresponding value, or null if the field is not present.
    
    Throws:
    
    RuntimeOperationsException - if the field name is illegal.
  - setField
```
void setField(String fieldName,
            Object fieldValue)
              throws RuntimeOperationsException
```
    Sets the value for a specific field name. This will modify an existing field or add a new field.
    
    The field value will be validated before it is set. If it is not valid, then an exception will be thrown. The meaning of validity is dependent on the descriptor implementation.
    
    Parameters:
    fieldName - The field name to be set. Cannot be null or empty.
    fieldValue - The field value to be set for the field name. Can be null if that is a valid value for the field.
    
    Throws:
    
    RuntimeOperationsException - if the field name or field value is illegal (wrapped exception is IllegalArgumentException); or if the descriptor is immutable (wrapped exception is UnsupportedOperationException).
  - getFields
```
String[] getFields()
```
    Returns all of the fields contained in this descriptor as a string array.
    
    Returns:
    String array of fields in the format fieldName=fieldValue
    If the value of a field is not a String, then the toString() method will be called on it and the returned value, enclosed in parentheses, used as the value for the field in the returned array. If the value of a field is null, then the value of the field in the returned array will be empty. If the descriptor is empty, you will get an empty array.
    See Also:
    setFields(java.lang.String[], java.lang.Object[])
  - getFieldNames
```
String[] getFieldNames()
```
    Returns all the field names in the descriptor.
    
    Returns:
    String array of field names. If the descriptor is empty, you will get an empty array.
  - getFieldValues
```
Object[] getFieldValues(String... fieldNames)
```
    Returns all the field values in the descriptor as an array of Objects. The returned values are in the same order as the fieldNames String array parameter.
    
    Parameters:
    fieldNames - String array of the names of the fields that the values should be returned for. If the array is empty then an empty array will be returned. If the array is null then all values will be returned, as if the parameter were the array returned by getFieldNames(). If a field name in the array does not exist, including the case where it is null or the empty string, then null is returned for the matching array element being returned.
    
    Returns:
    Object array of field values. If the list of fieldNames is empty, you will get an empty array.
  - removeField
```
void removeField(String fieldName)
```
    Removes a field from the descriptor.
    
    Parameters:
    fieldName - String name of the field to be removed. If the field name is illegal or the field is not found, no exception is thrown.
    
    Throws:
    
    RuntimeOperationsException - if a field of the given name exists and the descriptor is immutable. The wrapped exception will be an UnsupportedOperationException.
  - setFields
```
void setFields(String[] fieldNames,
             Object[] fieldValues)
               throws RuntimeOperationsException
```
    Sets all fields in the field names array to the new value with the same index in the field values array. Array sizes must match.
    
    The field value will be validated before it is set. If it is not valid, then an exception will be thrown. If the arrays are empty, then no change will take effect.
    
    Parameters:
    fieldNames - String array of field names. The array and array elements cannot be null.
    fieldValues - Object array of the corresponding field values. The array cannot be null. Elements of the array can be null.
    
    Throws:
    
    RuntimeOperationsException - if the change fails for any reason. Wrapped exception is IllegalArgumentException if fieldNames or fieldValues is null, or if the arrays are of different lengths, or if there is an illegal value in one of them. Wrapped exception is UnsupportedOperationException if the descriptor is immutable, and the call would change its contents.
    See Also:
    getFields()
  - clone
```
Object clone()
             throws RuntimeOperationsException
```
    Returns a descriptor which is equal to this descriptor. Changes to the returned descriptor will have no effect on this descriptor, and vice versa. If this descriptor is immutable, it may fulfill this condition by returning itself.
    
    Returns:
    A descriptor which is equal to this descriptor.
    
    Throws:
    
    RuntimeOperationsException - for illegal value for field names or field values. If the descriptor construction fails for any reason, this exception will be thrown.
  - isValid
```
boolean isValid()
                throws RuntimeOperationsException
```
    Returns true if all of the fields have legal values given their names.
    
    Returns:
    true if the values are legal.
    
    Throws:
    
    RuntimeOperationsException - If the validity checking fails for any reason, this exception will be thrown. The method returns false if the descriptor is not valid, but throws this exception if the attempt to determine validity fails.
  - equals
```
boolean equals(Object obj)
```
    Compares this descriptor to the given object. The objects are equal if the given object is also a Descriptor, and if the two Descriptors have the same field names (possibly differing in case) and the same associated values. The respective values for a field in the two Descriptors are equal if the following conditions hold:
    - If one value is null then the other must be too.
    - If one value is a primitive array then the other must be a primitive array of the same type with the same elements.
    - If one value is an object array then the other must be too and Arrays.deepEquals(Object[],Object[]) must return true.
    - Otherwise Object.equals(Object) must return true.
    Overrides:
    
    equals in class Object
    
    Parameters:
    obj - the object to compare with.
    
    Returns:
    true if the objects are the same; false otherwise.
    Since:
    
    1.6
    
    See Also:
    Object.hashCode(), HashMap
  - hashCode
```
int hashCode()
```
    Returns the hash code value for this descriptor. The hash code is computed as the sum of the hash codes for each field in the descriptor. The hash code of a field with name n and value v is n.toLowerCase().hashCode() ^ h. Here h is the hash code of v, computed as follows:
    - If v is null then h is 0.
    - If v is a primitive array then h is computed using the appropriate overloading of java.util.Arrays.hashCode.
    - If v is an object array then h is computed using Arrays.deepHashCode(Object[]).
    - Otherwise h is v.hashCode().
    Overrides:
    
    hashCode in class Object
    
    Returns:
    A hash code value for this object.
    Since:
    
    1.6
    
    See Also:
    Object.equals(java.lang.Object), System.identityHashCode(java.lang.Object)

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-javax/management/Descriptor.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut

Interface Descriptor

Method Summary

Method Detail

getFieldValue

setField

getFields

getFieldNames

getFieldValues

removeField

setFields

clone

isValid

equals

hashCode

Referenties