- java.lang.Object
-
- java.util.AbstractCollection<E>
-
- java.util.AbstractSet<E>
-
- java.util.HashSet<E>
-
- Type Parameters:
E
- the type of elements maintained by this set
- All Implemented Interfaces:
- Serializable, Cloneable, Iterable<E>, Collection<E>, Set<E>
- Direct Known Subclasses:
- JobStateReasons, LinkedHashSet
public class HashSet<E> extends AbstractSet<E> implements Set<E>, Cloneable, Serializable
This class implements the Set interface, backed by a hash table (actually a HashMap instance). It makes no guarantees as to the iteration order of the set; in particular, it does not guarantee that the order will remain constant over time. This class permits the null element.This class offers constant time performance for the basic operations (add, remove, contains and size), assuming the hash function disperses the elements properly among the buckets. Iterating over this set requires time proportional to the sum of the HashSet instance's size (the number of elements) plus the "capacity" of the backing HashMap instance (the number of buckets). Thus, it's very important not to set the initial capacity too high (or the load factor too low) if iteration performance is important.
Note that this implementation is not synchronized. If multiple threads access a hash set concurrently, and at least one of the threads modifies the set, it must be synchronized externally. This is typically accomplished by synchronizing on some object that naturally encapsulates the set. If no such object exists, the set should be "wrapped" using the
Collections.synchronizedSet
method. This is best done at creation time, to prevent accidental unsynchronized access to the set:Set s = Collections.synchronizedSet(new HashSet(...));
The iterators returned by this class's iterator method are fail-fast: if the set is modified at any time after the iterator is created, in any way except through the iterator's own remove method, the Iterator throws a
ConcurrentModificationException
. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future.Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.
This class is a member of the Java Collections Framework.
- Since:
- 1.2
- See Also:
Collection
,Set
,TreeSet
,HashMap
, Serialized Form
-
-
Constructor Summary
Constructors Constructor and Description HashSet()
Constructs a new, empty set; the backing HashMap instance has default initial capacity (16) and load factor (0.75).HashSet(Collection<? extends E> c)
Constructs a new set containing the elements in the specified collection.HashSet(int initialCapacity)
Constructs a new, empty set; the backing HashMap instance has the specified initial capacity and default load factor (0.75).HashSet(int initialCapacity, float loadFactor)
Constructs a new, empty set; the backing HashMap instance has the specified initial capacity and the specified load factor.
-
Method Summary
Methods Modifier and Type Method and Description boolean
add(E e)
Adds the specified element to this set if it is not already present.void
clear()
Removes all of the elements from this set.Object
clone()
Returns a shallow copy of this HashSet instance: the elements themselves are not cloned.boolean
contains(Object o)
Returns true if this set contains the specified element.boolean
isEmpty()
Returns true if this set contains no elements.Iterator<E>
iterator()
Returns an iterator over the elements in this set.boolean
remove(Object o)
Removes the specified element from this set if it is present.int
size()
Returns the number of elements in this set (its cardinality).-
Methods inherited from class java.util.AbstractCollection
addAll, containsAll, retainAll, toArray, toArray, toString
-
-
-
-
Constructor Detail
-
HashSet
public HashSet()
Constructs a new, empty set; the backing HashMap instance has default initial capacity (16) and load factor (0.75).
-
HashSet
public HashSet(Collection<? extends E> c)
Constructs a new set containing the elements in the specified collection. The HashMap is created with default load factor (0.75) and an initial capacity sufficient to contain the elements in the specified collection.- Parameters:
c
- the collection whose elements are to be placed into this set- Throws:
NullPointerException
- if the specified collection is null
-
HashSet
public HashSet(int initialCapacity, float loadFactor)
Constructs a new, empty set; the backing HashMap instance has the specified initial capacity and the specified load factor.- Parameters:
initialCapacity
- the initial capacity of the hash maploadFactor
- the load factor of the hash map- Throws:
IllegalArgumentException
- if the initial capacity is less than zero, or if the load factor is nonpositive
-
HashSet
public HashSet(int initialCapacity)
Constructs a new, empty set; the backing HashMap instance has the specified initial capacity and default load factor (0.75).- Parameters:
initialCapacity
- the initial capacity of the hash table- Throws:
IllegalArgumentException
- if the initial capacity is less than zero
-
-
Method Detail
-
iterator
public Iterator<E> iterator()
Returns an iterator over the elements in this set. The elements are returned in no particular order.- Specified by:
iterator
in interfaceIterable<E>
- Specified by:
iterator
in interfaceCollection<E>
- Specified by:
iterator
in interfaceSet<E>
- Specified by:
iterator
in classAbstractCollection<E>
- Returns:
- an Iterator over the elements in this set
- See Also:
ConcurrentModificationException
-
size
public int size()
Returns the number of elements in this set (its cardinality).- Specified by:
size
in interfaceCollection<E>
- Specified by:
size
in interfaceSet<E>
- Specified by:
size
in classAbstractCollection<E>
- Returns:
- the number of elements in this set (its cardinality)
-
isEmpty
public boolean isEmpty()
Returns true if this set contains no elements.- Specified by:
isEmpty
in interfaceCollection<E>
- Specified by:
isEmpty
in interfaceSet<E>
- Overrides:
isEmpty
in classAbstractCollection<E>
- Returns:
- true if this set contains no elements
-
contains
public boolean contains(Object o)
Returns true if this set contains the specified element. More formally, returns true if and only if this set contains an element e such that (o==null ? e==null : o.equals(e)).- Specified by:
contains
in interfaceCollection<E>
- Specified by:
contains
in interfaceSet<E>
- Overrides:
contains
in classAbstractCollection<E>
- Parameters:
o
- element whose presence in this set is to be tested- Returns:
- true if this set contains the specified element
-
add
public boolean add(E e)
Adds the specified element to this set if it is not already present. More formally, adds the specified element e to this set if this set contains no element e2 such that (e==null ? e2==null : e.equals(e2)). If this set already contains the element, the call leaves the set unchanged and returns false.- Specified by:
add
in interfaceCollection<E>
- Specified by:
add
in interfaceSet<E>
- Overrides:
add
in classAbstractCollection<E>
- Parameters:
e
- element to be added to this set- Returns:
- true if this set did not already contain the specified element
-
remove
public boolean remove(Object o)
Removes the specified element from this set if it is present. More formally, removes an element e such that (o==null ? e==null : o.equals(e)), if this set contains such an element. Returns true if this set contained the element (or equivalently, if this set changed as a result of the call). (This set will not contain the element once the call returns.)- Specified by:
remove
in interfaceCollection<E>
- Specified by:
remove
in interfaceSet<E>
- Overrides:
remove
in classAbstractCollection<E>
- Parameters:
o
- object to be removed from this set, if present- Returns:
- true if the set contained the specified element
-
clear
public void clear()
Removes all of the elements from this set. The set will be empty after this call returns.- Specified by:
clear
in interfaceCollection<E>
- Specified by:
clear
in interfaceSet<E>
- Overrides:
clear
in classAbstractCollection<E>
-
-
Nederlandse vertaling
U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.
Bij voorbaat dank.
Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-java/util/hashset.html
De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.
Referenties
Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.