java.lang.Object
- java.nio.channels.spi.AbstractInterruptibleChannel
- - java.nio.channels.SelectableChannel
  - - java.nio.channels.spi.AbstractSelectableChannel
    - - java.nio.channels.DatagramChannel

All Implemented Interfaces:: Closeable, AutoCloseable, ByteChannel, Channel, GatheringByteChannel, InterruptibleChannel, MulticastChannel, NetworkChannel, ReadableByteChannel, ScatteringByteChannel, WritableByteChannel

public abstract class DatagramChannel
extends AbstractSelectableChannel
implements ByteChannel, ScatteringByteChannel, GatheringByteChannel, MulticastChannel

A selectable channel for datagram-oriented sockets.

A datagram channel is created by invoking one of the open methods of this class. It is not possible to create a channel for an arbitrary, pre-existing datagram socket. A newly-created datagram channel is open but not connected. A datagram channel need not be connected in order for the send and receive methods to be used. A datagram channel may be connected, by invoking its connect method, in order to avoid the overhead of the security checks are otherwise performed as part of every send and receive operation. A datagram channel must be connected in order to use the read and write methods, since those methods do not accept or return socket addresses.

Once connected, a datagram channel remains connected until it is disconnected or closed. Whether or not a datagram channel is connected may be determined by invoking its isConnected method.

Socket options are configured using the setOption method. A datagram channel to an Internet Protocol socket supports the following options:

Option Name Description

SO_SNDBUF The size of the socket send buffer

SO_RCVBUF The size of the socket receive buffer

SO_REUSEADDR Re-use address

SO_BROADCAST Allow transmission of broadcast datagrams

IP_TOS The Type of Service (ToS) octet in the Internet Protocol (IP) header

IP_MULTICAST_IF The network interface for Internet Protocol (IP) multicast datagrams

IP_MULTICAST_TTL The time-to-live for Internet Protocol (IP) multicast datagrams

IP_MULTICAST_LOOP Loopback for Internet Protocol (IP) multicast datagrams

Eerste pagina van API Java Inhoudsopgave Haut

Additional (implementation specific) options may also be supported.

Datagram channels are safe for use by multiple concurrent threads. They support concurrent reading and writing, though at most one thread may be reading and at most one thread may be writing at any given time.

Since:: 1.4

Constructor Summary
Constructors
Modifier Constructor and Description

protected DatagramChannel(SelectorProvider provider)
Initializes a new instance of this class.

Eerste pagina van API Java Inhoudsopgave Haut

Method Summary

Methods
Modifier and Type	Method and Description
`abstract DatagramChannel`	`bind(SocketAddress local)` Binds the channel's socket to a local address.
`abstract DatagramChannel`	`connect(SocketAddress remote)` Connects this channel's socket.
`abstract DatagramChannel`	`disconnect()` Disconnects this channel's socket.
`abstract SocketAddress`	`getRemoteAddress()` Returns the remote address to which this channel's socket is connected.
`abstract boolean`	`isConnected()` Tells whether or not this channel's socket is connected.
`static DatagramChannel`	`open()` Opens a datagram channel.
`static DatagramChannel`	`open(ProtocolFamily family)` Opens a datagram channel.
`abstract int`	`read(ByteBuffer dst)` Reads a datagram from this channel.
`long`	`read(ByteBuffer[] dsts)` Reads a datagram from this channel.
`abstract long`	`read(ByteBuffer[] dsts, int offset, int length)` Reads a datagram from this channel.
`abstract SocketAddress`	`receive(ByteBuffer dst)` Receives a datagram via this channel.
`abstract int`	`send(ByteBuffer src, SocketAddress target)` Sends a datagram via this channel.
`abstract <T> DatagramChannel`	`setOption(SocketOption<T> name, T value)` Sets the value of a socket option.
`abstract DatagramSocket`	`socket()` Retrieves a datagram socket associated with this channel.
`int`	`validOps()` Returns an operation set identifying this channel's supported operations.
`abstract int`	`write(ByteBuffer src)` Writes a datagram to this channel.
`long`	`write(ByteBuffer[] srcs)` Writes a datagram to this channel.
`abstract long`	`write(ByteBuffer[] srcs, int offset, int length)` Writes a datagram to this channel.

Eerste pagina van API Java Inhoudsopgave Haut

Methods inherited from class java.nio.channels.spi.AbstractSelectableChannel blockingLock, configureBlocking, implCloseChannel, implCloseSelectableChannel, implConfigureBlocking, isBlocking, isRegistered, keyFor, provider, register

Methods inherited from class java.nio.channels.SelectableChannel register

Methods inherited from class java.nio.channels.spi.AbstractInterruptibleChannel begin, close, end, isOpen

Methods inherited from class java.lang.Object clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface java.nio.channels.MulticastChannel close, join, join

Methods inherited from interface java.nio.channels.NetworkChannel getLocalAddress, getOption, supportedOptions

Methods inherited from interface java.nio.channels.Channel isOpen

- Constructor Detail
  - DatagramChannel
    protected DatagramChannel(SelectorProvider provider)
    
    Initializes a new instance of this class.
- Method Detail
  - open
    public static DatagramChannel open() throws IOException
    
    Opens a datagram channel.
    The new channel is created by invoking the openDatagramChannel method of the system-wide default SelectorProvider object. The channel will not be connected.
    The ProtocolFamily of the channel's socket is platform (and possibly configuration) dependent and therefore unspecified. The open allows the protocol family to be selected when opening a datagram channel, and should be used to open datagram channels that are intended for Internet Protocol multicasting.
    
    Returns:
    A new datagram channel
    
    Throws:
    
    IOException - If an I/O error occurs
  - open
    public static DatagramChannel open(ProtocolFamily family) throws IOException
    
    Opens a datagram channel.
    The family parameter is used to specify the ProtocolFamily. If the datagram channel is to be used for IP multicasing then this should correspond to the address type of the multicast groups that this channel will join.
    The new channel is created by invoking the openDatagramChannel method of the system-wide default SelectorProvider object. The channel will not be connected.
    
    Parameters:
    family - The protocol family
    
    Returns:
    A new datagram channel
    
    Throws:
    
    UnsupportedOperationException - If the specified protocol family is not supported. For example, suppose the parameter is specified as StandardProtocolFamily.INET6 but IPv6 is not enabled on the platform.
    
    IOException - If an I/O error occurs
    Since:
    
    1.7
  - validOps
    public final int validOps()
    
    Returns an operation set identifying this channel's supported operations.
    Datagram channels support reading and writing, so this method returns (SelectionKey.OP_READ | SelectionKey.OP_WRITE).
    
    Specified by:
    
    validOps in class SelectableChannel
    
    Returns:
    The valid-operation set
  - bind
    public abstract DatagramChannel bind(SocketAddress local) throws IOException
    
    Description copied from interface: NetworkChannel
    
    Binds the channel's socket to a local address.
    This method is used to establish an association between the socket and a local address. Once an association is established then the socket remains bound until the channel is closed. If the local parameter has the value null then the socket will be bound to an address that is assigned automatically.
    
    Specified by:
    
    bind in interface NetworkChannel
    
    Parameters:
    local - The address to bind the socket, or null to bind the socket to an automatically assigned socket address
    
    Returns:
    This channel
    
    Throws:
    
    AlreadyBoundException - If the socket is already bound
    
    UnsupportedAddressTypeException - If the type of the given address is not supported
    
    ClosedChannelException - If the channel is closed
    
    IOException - If some other I/O error occurs
    
    SecurityException - If a security manager has been installed and its checkListen method denies the operation
    Since:
    
    1.7
    
    See Also:
    NetworkChannel.getLocalAddress()
  - setOption
    public abstract <T> DatagramChannel setOption(SocketOption<T> name, T value) throws IOException
    
    Description copied from interface: NetworkChannel
    
    Sets the value of a socket option.
    
    Specified by:
    
    setOption in interface NetworkChannel
    
    Parameters:
    name - The socket option
    value - The value of the socket option. A value of null may be a valid value for some socket options.
    
    Returns:
    This channel
    
    Throws:
    
    UnsupportedOperationException - If the socket option is not supported by this channel
    
    IllegalArgumentException - If the value is not a valid value for this socket option
    
    ClosedChannelException - If this channel is closed
    
    IOException - If an I/O error occurs
    Since:
    
    1.7
    
    See Also:
    StandardSocketOptions
  - socket
    public abstract DatagramSocket socket()
    
    Retrieves a datagram socket associated with this channel.
    The returned object will not declare any public methods that are not declared in the DatagramSocket class.
    
    Returns:
    A datagram socket associated with this channel
  - isConnected
    public abstract boolean isConnected()
    
    Tells whether or not this channel's socket is connected.
    
    Returns:
    true if, and only if, this channel's socket is open and connected
  - connect
    public abstract DatagramChannel connect(SocketAddress remote) throws IOException
    
    Connects this channel's socket.
    The channel's socket is configured so that it only receives datagrams from, and sends datagrams to, the given remote peer address. Once connected, datagrams may not be received from or sent to any other address. A datagram socket remains connected until it is explicitly disconnected or until it is closed.
    This method performs exactly the same security checks as the connect method of the DatagramSocket class. That is, if a security manager has been installed then this method verifies that its checkAccept and checkConnect methods permit datagrams to be received from and sent to, respectively, the given remote address.
    This method may be invoked at any time. It will not have any effect on read or write operations that are already in progress at the moment that it is invoked. If this channel's socket is not bound then this method will first cause the socket to be bound to an address that is assigned automatically, as if invoking the bind method with a parameter of null.
    
    Parameters:
    remote - The remote address to which this channel is to be connected
    
    Returns:
    This datagram channel
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the connect operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the connect operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    SecurityException - If a security manager has been installed and it does not permit access to the given remote address
    
    IOException - If some other I/O error occurs
  - disconnect
    public abstract DatagramChannel disconnect() throws IOException
    
    Disconnects this channel's socket.
    The channel's socket is configured so that it can receive datagrams from, and sends datagrams to, any remote address so long as the security manager, if installed, permits it.
    This method may be invoked at any time. It will not have any effect on read or write operations that are already in progress at the moment that it is invoked.
    If this channel's socket is not connected, or if the channel is closed, then invoking this method has no effect.
    
    Returns:
    This datagram channel
    
    Throws:
    
    IOException - If some other I/O error occurs
  - getRemoteAddress
    public abstract SocketAddress getRemoteAddress() throws IOException
    
    Returns the remote address to which this channel's socket is connected.
    
    Returns:
    The remote address; null if the channel's socket is not connected
    
    Throws:
    
    ClosedChannelException - If the channel is closed
    
    IOException - If an I/O error occurs
    Since:
    
    1.7
  - receive
    public abstract SocketAddress receive(ByteBuffer dst) throws IOException
    
    Receives a datagram via this channel.
    If a datagram is immediately available, or if this channel is in blocking mode and one eventually becomes available, then the datagram is copied into the given byte buffer and its source address is returned. If this channel is in non-blocking mode and a datagram is not immediately available then this method immediately returns null.
    The datagram is transferred into the given byte buffer starting at its current position, as if by a regular read operation. If there are fewer bytes remaining in the buffer than are required to hold the datagram then the remainder of the datagram is silently discarded.
    This method performs exactly the same security checks as the receive method of the DatagramSocket class. That is, if the socket is not connected to a specific remote address and a security manager has been installed then for each datagram received this method verifies that the source's address and port number are permitted by the security manager's checkAccept method. The overhead of this security check can be avoided by first connecting the socket via the connect method.
    This method may be invoked at any time. If another thread has already initiated a read operation upon this channel, however, then an invocation of this method will block until the first operation is complete. If this channel's socket is not bound then this method will first cause the socket to be bound to an address that is assigned automatically, as if invoking the bind method with a parameter of null.
    
    Parameters:
    dst - The buffer into which the datagram is to be transferred
    
    Returns:
    The datagram's source address, or null if this channel is in non-blocking mode and no datagram was immediately available
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    SecurityException - If a security manager has been installed and it does not permit datagrams to be accepted from the datagram's sender
    
    IOException - If some other I/O error occurs
  - send
    public abstract int send(ByteBuffer src, SocketAddress target) throws IOException
    
    Sends a datagram via this channel.
    If this channel is in non-blocking mode and there is sufficient room in the underlying output buffer, or if this channel is in blocking mode and sufficient room becomes available, then the remaining bytes in the given buffer are transmitted as a single datagram to the given target address.
    The datagram is transferred from the byte buffer as if by a regular write operation.
    This method performs exactly the same security checks as the send method of the DatagramSocket class. That is, if the socket is not connected to a specific remote address and a security manager has been installed then for each datagram sent this method verifies that the target address and port number are permitted by the security manager's checkConnect method. The overhead of this security check can be avoided by first connecting the socket via the connect method.
    This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete. If this channel's socket is not bound then this method will first cause the socket to be bound to an address that is assigned automatically, as if by invoking the bind method with a parameter of null.
    
    Parameters:
    src - The buffer containing the datagram to be sent
    target - The address to which the datagram is to be sent
    
    Returns:
    The number of bytes sent, which will be either the number of bytes that were remaining in the source buffer when this method was invoked or, if this channel is non-blocking, may be zero if there was insufficient room for the datagram in the underlying output buffer
    
    Throws:
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    SecurityException - If a security manager has been installed and it does not permit datagrams to be sent to the given address
    
    IOException - If some other I/O error occurs
  - read
    public abstract int read(ByteBuffer dst) throws IOException
    
    Reads a datagram from this channel.
    This method may only be invoked if this channel's socket is connected, and it only accepts datagrams from the socket's peer. If there are more bytes in the datagram than remain in the given buffer then the remainder of the datagram is silently discarded. Otherwise this method behaves exactly as specified in the ReadableByteChannel interface.
    
    Specified by:
    
    read in interface ReadableByteChannel
    
    Parameters:
    dst - The buffer into which bytes are to be transferred
    
    Returns:
    The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs
  - read
    public abstract long read(ByteBuffer[] dsts, int offset, int length) throws IOException
    
    Reads a datagram from this channel.
    This method may only be invoked if this channel's socket is connected, and it only accepts datagrams from the socket's peer. If there are more bytes in the datagram than remain in the given buffers then the remainder of the datagram is silently discarded. Otherwise this method behaves exactly as specified in the ScatteringByteChannel interface.
    
    Specified by:
    
    read in interface ScatteringByteChannel
    
    Parameters:
    dsts - The buffers into which bytes are to be transferred
    offset - The offset within the buffer array of the first buffer into which bytes are to be transferred; must be non-negative and no larger than dsts.length
    length - The maximum number of buffers to be accessed; must be non-negative and no larger than dsts.length - offset
    
    Returns:
    The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs
  - read
    public final long read(ByteBuffer[] dsts) throws IOException
    
    Reads a datagram from this channel.
    This method may only be invoked if this channel's socket is connected, and it only accepts datagrams from the socket's peer. If there are more bytes in the datagram than remain in the given buffers then the remainder of the datagram is silently discarded. Otherwise this method behaves exactly as specified in the ScatteringByteChannel interface.
    
    Specified by:
    
    read in interface ScatteringByteChannel
    
    Parameters:
    dsts - The buffers into which bytes are to be transferred
    
    Returns:
    The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs
  - write
    public abstract int write(ByteBuffer src) throws IOException
    
    Writes a datagram to this channel.
    This method may only be invoked if this channel's socket is connected, in which case it sends datagrams directly to the socket's peer. Otherwise it behaves exactly as specified in the WritableByteChannel interface.
    
    Specified by:
    
    write in interface WritableByteChannel
    
    Parameters:
    src - The buffer from which bytes are to be retrieved
    
    Returns:
    The number of bytes written, possibly zero
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs
  - write
    public abstract long write(ByteBuffer[] srcs, int offset, int length) throws IOException
    
    Writes a datagram to this channel.
    This method may only be invoked if this channel's socket is connected, in which case it sends datagrams directly to the socket's peer. Otherwise it behaves exactly as specified in the GatheringByteChannel interface.
    
    Specified by:
    
    write in interface GatheringByteChannel
    
    Parameters:
    srcs - The buffers from which bytes are to be retrieved
    offset - The offset within the buffer array of the first buffer from which bytes are to be retrieved; must be non-negative and no larger than srcs.length
    length - The maximum number of buffers to be accessed; must be non-negative and no larger than srcs.length - offset
    
    Returns:
    The number of bytes sent, which will be either the number of bytes that were remaining in the source buffer when this method was invoked or, if this channel is non-blocking, may be zero if there was insufficient room for the datagram in the underlying output buffer
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs
  - write
    public final long write(ByteBuffer[] srcs) throws IOException
    
    Writes a datagram to this channel.
    This method may only be invoked if this channel's socket is connected, in which case it sends datagrams directly to the socket's peer. Otherwise it behaves exactly as specified in the GatheringByteChannel interface.
    
    Specified by:
    
    write in interface GatheringByteChannel
    
    Parameters:
    srcs - The buffers from which bytes are to be retrieved
    
    Returns:
    The number of bytes sent, which will be either the number of bytes that were remaining in the source buffer when this method was invoked or, if this channel is non-blocking, may be zero if there was insufficient room for the datagram in the underlying output buffer
    
    Throws:
    
    NotYetConnectedException - If this channel's socket is not connected
    
    ClosedChannelException - If this channel is closed
    
    AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
    
    ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
    
    IOException - If some other I/O error occurs

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-java/nio/channels/DatagramChannel.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut

Option Name	Description
`SO_SNDBUF`	The size of the socket send buffer
`SO_RCVBUF`	The size of the socket receive buffer
`SO_REUSEADDR`	Re-use address
`SO_BROADCAST`	Allow transmission of broadcast datagrams
`IP_TOS`	The Type of Service (ToS) octet in the Internet Protocol (IP) header
`IP_MULTICAST_IF`	The network interface for Internet Protocol (IP) multicast datagrams
`IP_MULTICAST_TTL`	The time-to-live for Internet Protocol (IP) multicast datagrams
`IP_MULTICAST_LOOP`	Loopback for Internet Protocol (IP) multicast datagrams

Class DatagramChannel

Referenties