java.io

Class ByteArrayInputStream

  • All Implemented Interfaces:
    Closeable, AutoCloseable

    public class ByteArrayInputStream
    extends InputStream
    A ByteArrayInputStream contains an internal buffer that contains bytes that may be read from the stream. An internal counter keeps track of the next byte to be supplied by the read method.

    Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.

    Since:
    JDK1.0
    See Also:
    StringBufferInputStream
    • Field Summary

      Fields 
      Modifier and Type Field and Description
      protected byte[] buf
      An array of bytes that was provided by the creator of the stream.
      protected int count
      The index one greater than the last valid character in the input stream buffer.
      protected int mark
      The currently marked position in the stream.
      protected int pos
      The index of the next character to read from the input stream buffer.

      Eerste pagina van API Java Inhoudsopgave Haut

    • Method Summary

      Methods 
      Modifier and Type Method and Description
      int available()
      Returns the number of remaining bytes that can be read (or skipped over) from this input stream.
      void close()
      Closing a ByteArrayInputStream has no effect.
      void mark(int readAheadLimit)
      Set the current marked position in the stream.
      boolean markSupported()
      Tests if this InputStream supports mark/reset.
      int read()
      Reads the next byte of data from this input stream.
      int read(byte[] b, int off, int len)
      Reads up to len bytes of data into an array of bytes from this input stream.
      void reset()
      Resets the buffer to the marked position.
      long skip(long n)
      Skips n bytes of input from this input stream.

      Eerste pagina van API Java Inhoudsopgave Haut

      • Methods inherited from class java.io.InputStream

        read
    • Field Detail

      • buf

        protected byte[] buf
        An array of bytes that was provided by the creator of the stream. Elements buf[0] through buf[count-1] are the only bytes that can ever be read from the stream; element buf[pos] is the next byte to be read.
      • pos

        protected int pos
        The index of the next character to read from the input stream buffer. This value should always be nonnegative and not larger than the value of count. The next byte to be read from the input stream buffer will be buf[pos].
      • mark

        protected int mark
        The currently marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by the mark() method. The current buffer position is set to this point by the reset() method.

        If no mark has been set, then the value of mark is the offset passed to the constructor (or 0 if the offset was not supplied).

        Since:
        JDK1.1
      • count

        protected int count
        The index one greater than the last valid character in the input stream buffer. This value should always be nonnegative and not larger than the length of buf. It is one greater than the position of the last byte within buf that can ever be read from the input stream buffer.
    • Constructor Detail

      • ByteArrayInputStream

        public ByteArrayInputStream(byte[] buf)
        Creates a ByteArrayInputStream so that it uses buf as its buffer array. The buffer array is not copied. The initial value of pos is 0 and the initial value of count is the length of buf.
        Parameters:
        buf - the input buffer.
      • ByteArrayInputStream

        public ByteArrayInputStream(byte[] buf,
                            int offset,
                            int length)
        Creates ByteArrayInputStream that uses buf as its buffer array. The initial value of pos is offset and the initial value of count is the minimum of offset+length and buf.length. The buffer array is not copied. The buffer's mark is set to the specified offset.
        Parameters:
        buf - the input buffer.
        offset - the offset in the buffer of the first byte to read.
        length - the maximum number of bytes to read from the buffer.
    • Method Detail

      • read

        public int read()
        Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned.

        This read method cannot block.

        Specified by:
        read in class InputStream
        Returns:
        the next byte of data, or -1 if the end of the stream has been reached.
      • read

        public int read(byte[] b,
               int off,
               int len)
        Reads up to len bytes of data into an array of bytes from this input stream. If pos equals count, then -1 is returned to indicate end of file. Otherwise, the number k of bytes read is equal to the smaller of len and count-pos. If k is positive, then bytes buf[pos] through buf[pos+k-1] are copied into b[off] through b[off+k-1] in the manner performed by System.arraycopy. The value k is added into pos and k is returned.

        This read method cannot block.

        Overrides:
        read in class InputStream
        Parameters:
        b - the buffer into which the data is read.
        off - the start offset in the destination array b
        len - the maximum number of bytes read.
        Returns:
        the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
        Throws:
        NullPointerException - If b is null.
        IndexOutOfBoundsException - If off is negative, len is negative, or len is greater than b.length - off
        See Also:
        InputStream.read()
      • skip

        public long skip(long n)
        Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached. The actual number k of bytes to be skipped is equal to the smaller of n and count-pos. The value k is added into pos and k is returned.
        Overrides:
        skip in class InputStream
        Parameters:
        n - the number of bytes to be skipped.
        Returns:
        the actual number of bytes skipped.
      • available

        public int available()
        Returns the number of remaining bytes that can be read (or skipped over) from this input stream.

        The value returned is count - pos, which is the number of bytes remaining to be read from the input buffer.

        Overrides:
        available in class InputStream
        Returns:
        the number of remaining bytes that can be read (or skipped over) from this input stream without blocking.
      • markSupported

        public boolean markSupported()
        Tests if this InputStream supports mark/reset. The markSupported method of ByteArrayInputStream always returns true.
        Overrides:
        markSupported in class InputStream
        Returns:
        true if this stream instance supports the mark and reset methods; false otherwise.
        Since:
        JDK1.1
        See Also:
        InputStream.mark(int), InputStream.reset()
      • mark

        public void mark(int readAheadLimit)
        Set the current marked position in the stream. ByteArrayInputStream objects are marked at position zero by default when constructed. They may be marked at another position within the buffer by this method.

        If no mark has been set, then the value of the mark is the offset passed to the constructor (or 0 if the offset was not supplied).

        Note: The readAheadLimit for this class has no meaning.

        Overrides:
        mark in class InputStream
        Parameters:
        readAheadLimit - the maximum limit of bytes that can be read before the mark position becomes invalid.
        Since:
        JDK1.1
        See Also:
        InputStream.reset()
      • reset

        public void reset()
        Resets the buffer to the marked position. The marked position is 0 unless another position was marked or an offset was specified in the constructor.
        Overrides:
        reset in class InputStream
        See Also:
        InputStream.mark(int), IOException
      • close

        public void close()
                   throws IOException
        Closing a ByteArrayInputStream has no effect. The methods in this class can be called after the stream has been closed without generating an IOException.

        Specified by:
        close in interface Closeable
        Specified by:
        close in interface AutoCloseable
        Overrides:
        close in class InputStream
        Throws:
        IOException - if an I/O error occurs.

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-java/io/bytearrayinputstream.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

  1. Bekijk - html-document Taal van het document:fr Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut