java.lang.Object
- java.awt.image.RescaleOp

All Implemented Interfaces:

BufferedImageOp, RasterOp
```
public class RescaleOp
extends Object
implements BufferedImageOp, RasterOp
```
This class performs a pixel-by-pixel rescaling of the data in the source image by multiplying the sample values for each pixel by a scale factor and then adding an offset. The scaled sample values are clipped to the minimum/maximum representable in the destination image.
The pseudo code for the rescaling operation is as follows:
```
for each pixel from Source object {
    for each band/component of the pixel {
        dstElement = (srcElement*scaleFactor) + offset
    }
}
 
```
For Rasters, rescaling operates on bands. The number of sets of scaling constants may be one, in which case the same constants are applied to all bands, or it must equal the number of Source Raster bands.
For BufferedImages, rescaling operates on color and alpha components. The number of sets of scaling constants may be one, in which case the same constants are applied to all color (but not alpha) components. Otherwise, the number of sets of scaling constants may equal the number of Source color components, in which case no rescaling of the alpha component (if present) is performed. If neither of these cases apply, the number of sets of scaling constants must equal the number of Source color components plus alpha components, in which case all color and alpha components are rescaled.
BufferedImage sources with premultiplied alpha data are treated in the same manner as non-premultiplied images for purposes of rescaling. That is, the rescaling is done per band on the raw data of the BufferedImage source without regard to whether the data is premultiplied. If a color conversion is required to the destination ColorModel, the premultiplied state of both source and destination will be taken into account for this step.
Images with an IndexColorModel cannot be rescaled.
If a RenderingHints object is specified in the constructor, the color rendering hint and the dithering hint may be used when color conversion is required.
Note that in-place operation is allowed (i.e. the source and destination can be the same object).
See Also:
RenderingHints.KEY_COLOR_RENDERING, RenderingHints.KEY_DITHERING

Constructor Summary

Constructors
Constructor and Description
`RescaleOp(float[] scaleFactors, float[] offsets, RenderingHints hints)` Constructs a new RescaleOp with the desired scale factors and offsets.
`RescaleOp(float scaleFactor, float offset, RenderingHints hints)` Constructs a new RescaleOp with the desired scale factor and offset.

Eerste pagina van API Java Inhoudsopgave Haut

Method Summary

Methods
Modifier and Type	Method and Description
`BufferedImage`	`createCompatibleDestImage(BufferedImage src, ColorModel destCM)` Creates a zeroed destination image with the correct size and number of bands.
`WritableRaster`	`createCompatibleDestRaster(Raster src)` Creates a zeroed-destination `Raster` with the correct size and number of bands, given this source.
`BufferedImage`	`filter(BufferedImage src, BufferedImage dst)` Rescales the source BufferedImage.
`WritableRaster`	`filter(Raster src, WritableRaster dst)` Rescales the pixel data in the source Raster.
`Rectangle2D`	`getBounds2D(BufferedImage src)` Returns the bounding box of the rescaled destination image.
`Rectangle2D`	`getBounds2D(Raster src)` Returns the bounding box of the rescaled destination Raster.
`int`	`getNumFactors()` Returns the number of scaling factors and offsets used in this RescaleOp.
`float[]`	`getOffsets(float[] offsets)` Returns the offsets in the given array.
`Point2D`	`getPoint2D(Point2D srcPt, Point2D dstPt)` Returns the location of the destination point given a point in the source.
`RenderingHints`	`getRenderingHints()` Returns the rendering hints for this op.
`float[]`	`getScaleFactors(float[] scaleFactors)` Returns the scale factors in the given array.

Eerste pagina van API Java Inhoudsopgave Haut

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - RescaleOp
```
public RescaleOp(float[] scaleFactors,
         float[] offsets,
         RenderingHints hints)
```
    Constructs a new RescaleOp with the desired scale factors and offsets. The length of the scaleFactor and offset arrays must meet the restrictions stated in the class comments above. The RenderingHints argument may be null.
    
    Parameters:
    scaleFactors - the specified scale factors
    offsets - the specified offsets
    hints - the specified RenderingHints, or null
  - RescaleOp
```
public RescaleOp(float scaleFactor,
         float offset,
         RenderingHints hints)
```
    Constructs a new RescaleOp with the desired scale factor and offset. The scaleFactor and offset will be applied to all bands in a source Raster and to all color (but not alpha) components in a BufferedImage. The RenderingHints argument may be null.
    
    Parameters:
    scaleFactor - the specified scale factor
    offset - the specified offset
    hints - the specified RenderingHints, or null
- Method Detail
  - getScaleFactors
```
public final float[] getScaleFactors(float[] scaleFactors)
```
    Returns the scale factors in the given array. The array is also returned for convenience. If scaleFactors is null, a new array will be allocated.
    
    Parameters:
    scaleFactors - the array to contain the scale factors of this RescaleOp
    
    Returns:
    the scale factors of this RescaleOp.
  - getOffsets
```
public final float[] getOffsets(float[] offsets)
```
    Returns the offsets in the given array. The array is also returned for convenience. If offsets is null, a new array will be allocated.
    
    Parameters:
    offsets - the array to contain the offsets of this RescaleOp
    
    Returns:
    the offsets of this RescaleOp.
  - getNumFactors
```
public final int getNumFactors()
```
    Returns the number of scaling factors and offsets used in this RescaleOp.
    
    Returns:
    the number of scaling factors and offsets of this RescaleOp.
  - filter
```
public final BufferedImage filter(BufferedImage src,
                   BufferedImage dst)
```
    Rescales the source BufferedImage. If the color model in the source image is not the same as that in the destination image, the pixels will be converted in the destination. If the destination image is null, a BufferedImage will be created with the source ColorModel. An IllegalArgumentException may be thrown if the number of scaling factors/offsets in this object does not meet the restrictions stated in the class comments above, or if the source image has an IndexColorModel.
    
    Specified by:
    
    filter in interface BufferedImageOp
    
    Parameters:
    src - the BufferedImage to be filtered
    dst - the destination for the filtering operation or null
    
    Returns:
    the filtered BufferedImage.
    
    Throws:
    
    IllegalArgumentException - if the ColorModel of src is an IndexColorModel, or if the number of scaling factors and offsets in this RescaleOp do not meet the requirements stated in the class comments.
  - filter
```
public final WritableRaster filter(Raster src,
                    WritableRaster dst)
```
    Rescales the pixel data in the source Raster. If the destination Raster is null, a new Raster will be created. The source and destination must have the same number of bands. Otherwise, an IllegalArgumentException is thrown. Note that the number of scaling factors/offsets in this object must meet the restrictions stated in the class comments above. Otherwise, an IllegalArgumentException is thrown.
    
    Specified by:
    
    filter in interface RasterOp
    
    Parameters:
    src - the Raster to be filtered
    dst - the destination for the filtering operation or null
    
    Returns:
    the filtered WritableRaster.
    
    Throws:
    
    IllegalArgumentException - if src and dst do not have the same number of bands, or if the number of scaling factors and offsets in this RescaleOp do not meet the requirements stated in the class comments.
  - getBounds2D
```
public final Rectangle2D getBounds2D(BufferedImage src)
```
    Returns the bounding box of the rescaled destination image. Since this is not a geometric operation, the bounding box does not change.
    
    Specified by:
    
    getBounds2D in interface BufferedImageOp
    
    Parameters:
    src - The BufferedImage to be filtered
    
    Returns:
    The Rectangle2D representing the destination image's bounding box.
  - getBounds2D
```
public final Rectangle2D getBounds2D(Raster src)
```
    Returns the bounding box of the rescaled destination Raster. Since this is not a geometric operation, the bounding box does not change.
    
    Specified by:
    
    getBounds2D in interface RasterOp
    
    Parameters:
    src - the rescaled destination Raster
    
    Returns:
    the bounds of the specified Raster.
  - createCompatibleDestImage
```
public BufferedImage createCompatibleDestImage(BufferedImage src,
                                      ColorModel destCM)
```
    Creates a zeroed destination image with the correct size and number of bands.
    
    Specified by:
    
    createCompatibleDestImage in interface BufferedImageOp
    
    Parameters:
    src - Source image for the filter operation.
    destCM - ColorModel of the destination. If null, the ColorModel of the source will be used.
    
    Returns:
    the zeroed-destination image.
  - createCompatibleDestRaster
```
public WritableRaster createCompatibleDestRaster(Raster src)
```
    Creates a zeroed-destination Raster with the correct size and number of bands, given this source.
    
    Specified by:
    
    createCompatibleDestRaster in interface RasterOp
    
    Parameters:
    src - the source Raster
    
    Returns:
    the zeroed-destination Raster.
  - getPoint2D
```
public final Point2D getPoint2D(Point2D srcPt,
                 Point2D dstPt)
```
    Returns the location of the destination point given a point in the source. If dstPt is non-null, it will be used to hold the return value. Since this is not a geometric operation, the srcPt will equal the dstPt.
    
    Specified by:
    
    getPoint2D in interface BufferedImageOp
    
    Specified by:
    
    getPoint2D in interface RasterOp
    
    Parameters:
    srcPt - a point in the source image
    dstPt - the destination point or null
    
    Returns:
    the location of the destination point.
  - getRenderingHints
```
public final RenderingHints getRenderingHints()
```
    Returns the rendering hints for this op.
    
    Specified by:
    
    getRenderingHints in interface BufferedImageOp
    
    Specified by:
    
    getRenderingHints in interface RasterOp
    
    Returns:
    the rendering hints of this RescaleOp.

Nederlandse vertaling

U hebt gevraagd om deze site in het Nederlands te bezoeken. Voor nu wordt alleen de interface vertaald, maar nog niet alle inhoud.

Als je me wilt helpen met vertalingen, is je bijdrage welkom. Het enige dat u hoeft te doen, is u op de site registreren en mij een bericht sturen waarin u wordt gevraagd om u toe te voegen aan de groep vertalers, zodat u de gewenste pagina's kunt vertalen. Een link onderaan elke vertaalde pagina geeft aan dat u de vertaler bent en heeft een link naar uw profiel.

Bij voorbaat dank.

Document heeft de 11/06/2005 gemaakt, de laatste keer de 04/03/2020 gewijzigd
Bron van het afgedrukte document:https://www.gaudry.be/nl/java-api-rf-java/awt/image/RescaleOp.html

De infobrol is een persoonlijke site waarvan de inhoud uitsluitend mijn verantwoordelijkheid is. De tekst is beschikbaar onder CreativeCommons-licentie (BY-NC-SA). Meer info op de gebruiksvoorwaarden en de auteur.

Referenties

Manuel PHP : https://docs.oracle.com

Deze verwijzingen en links verwijzen naar documenten die geraadpleegd zijn tijdens het schrijven van deze pagina, of die aanvullende informatie kunnen geven, maar de auteurs van deze bronnen kunnen niet verantwoordelijk worden gehouden voor de inhoud van deze pagina.
De auteur Deze site is als enige verantwoordelijk voor de manier waarop de verschillende concepten, en de vrijheden die met de referentiewerken worden genomen, hier worden gepresenteerd. Vergeet niet dat u meerdere broninformatie moet doorgeven om het risico op fouten te verkleinen.

Inhoudsopgave Haut

Class RescaleOp

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

RescaleOp

RescaleOp

Method Detail

getScaleFactors

getOffsets

getNumFactors

filter

filter

getBounds2D

getBounds2D

createCompatibleDestImage

createCompatibleDestRaster

getPoint2D

getRenderingHints

Referenties