Rechercher dans le manuel MySQL

6.5.3.2 Password Validation Options and Variables

This section describes the system and status variables that validate_password provides to enable its operation to be configured and monitored.

Password Validation Component System Variables

If the validate_password component is enabled, it exposes several system variables that enable configuration of password checking:

  1. mysql> SHOW VARIABLES LIKE 'validate_password.%';
  2. +--------------------------------------+--------+
  3. | Variable_name                        | Value  |
  4. +--------------------------------------+--------+
  5. | validate_password.check_user_name    | ON     |
  6. | validate_password.dictionary_file    |        |
  7. | validate_password.length             | 8      |
  8. | validate_password.mixed_case_count   | 1      |
  9. | validate_password.number_count       | 1      |
  10. | validate_password.policy             | MEDIUM |
  11. | validate_password.special_char_count | 1      |
  12. +--------------------------------------+--------+

To change how passwords are checked, you can set these system variables at server startup or at runtime. The following list describes the meaning of each variable.

  • validate_password.check_user_name

    Property Value
    Command-Line Format --validate-password.check-user-name
    Introduced 8.0.4
    System Variable validate_password.check_user_name
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Boolean
    Default Value ON

    Whether validate_password compares passwords to the user name part of the effective user account for the current session and rejects them if they match. This variable is unavailable unless validate_password is installed.

    By default, validate_password.check_user_name is enabled. This variable controls user name matching independent of the value of validate_password.policy.

    When validate_password.check_user_name is enabled, it has these effects:

    • Checking occurs in all contexts for which validate_password is invoked, which includes use of statements such as ALTER USER or SET PASSWORD to change the current user's password, and invocation of functions such as VALIDATE_PASSWORD_STRENGTH().

    • The user names used for comparison are taken from the values of the USER() and CURRENT_USER() functions for the current session. An implication is that a user who has sufficient privileges to set another user's password can set the password to that user's name, and cannot set that user's password to the name of the user executing the statement. For example, 'root'@'localhost' can set the password for 'jeffrey'@'localhost' to 'jeffrey', but cannot set the password to 'root.

    • Only the user name part of the USER() and CURRENT_USER() function values is used, not the host name part. If a user name is empty, no comparison occurs.

    • If a password is the same as the user name or its reverse, a match occurs and the password is rejected.

    • User-name matching is case sensitive. The password and user name values are compared as binary strings on a byte-by-byte basis.

    • If a password matches the user name, VALIDATE_PASSWORD_STRENGTH() returns 0 regardless of how other validate_password system variables are set.

  • validate_password.dictionary_file

    Property Value
    Introduced 8.0.4
    System Variable validate_password.dictionary_file
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type File name

    The path name of the dictionary file that validate_password uses for checking passwords. This variable is unavailable unless validate_password is installed.

    By default, this variable has an empty value and dictionary checks are not performed. For dictionary checks to occur, the variable value must be nonempty. If the file is named as a relative path, it is interpreted relative to the server data directory. File contents should be lowercase, one word per line. Contents are treated as having a character set of utf8. The maximum permitted file size is 1MB.

    For the dictionary file to be used during password checking, the password policy must be set to 2 (STRONG); see the description of the validate_password.policy system variable. Assuming that is true, each substring of the password of length 4 up to 100 is compared to the words in the dictionary file. Any match causes the password to be rejected. Comparisons are not case sensitive.

    For VALIDATE_PASSWORD_STRENGTH(), the password is checked against all policies, including STRONG, so the strength assessment includes the dictionary check regardless of the validate_password.policy value.

    validate_password.dictionary_file can be set at runtime and assigning a value causes the named file to be read without a server restart.

  • validate_password.length

    Property Value
    Introduced 8.0.4
    System Variable validate_password.length
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 8
    Minimum Value 0

    The minimum number of characters that validate_password requires passwords to have. This variable is unavailable unless validate_password is installed.

    The validate_password.length minimum value is a function of several other related system variables. The value cannot be set less than the value of this expression:

    validate_password.number_count
    + validate_password.special_char_count
    + (2 * validate_password.mixed_case_count)

    If validate_password adjusts the value of validate_password.length due to the preceding constraint, it writes a message to the error log.

  • validate_password.mixed_case_count

    Property Value
    Introduced 8.0.4
    System Variable validate_password.mixed_case_count
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 1
    Minimum Value 0

    The minimum number of lowercase and uppercase characters that validate_password requires passwords to have if the password policy is MEDIUM or stronger. This variable is unavailable unless validate_password is installed.

    For a given validate_password.mixed_case_count value, the password must have that many lowercase characters, and that many uppercase characters.

  • validate_password.number_count

    Property Value
    Introduced 8.0.4
    System Variable validate_password.number_count
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 1
    Minimum Value 0

    The minimum number of numeric (digit) characters that validate_password requires passwords to have if the password policy is MEDIUM or stronger. This variable is unavailable unless validate_password is installed.

  • validate_password.policy

    Property Value
    Introduced 8.0.4
    System Variable validate_password.policy
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Enumeration
    Default Value 1
    Valid Values

    0

    1

    2

    The password policy enforced by validate_password. This variable is unavailable unless validate_password is installed.

    validate_password.policy affects how validate_password uses its other policy-setting system variables, except for checking passwords against user names, which is controlled independently by validate_password.check_user_name.

    The validate_password.policy value can be specified using numeric values 0, 1, 2, or the corresponding symbolic values LOW, MEDIUM, STRONG. The following table describes the tests performed for each policy. For the length test, the required length is the value of the validate_password.length system variable. Similarly, the required values for the other tests are given by other validate_password.xxx variables.

    Policy Tests Performed
    0 or LOW Length
    1 or MEDIUM Length; numeric, lowercase/uppercase, and special characters
    2 or STRONG Length; numeric, lowercase/uppercase, and special characters; dictionary file
  • validate_password.special_char_count

    Property Value
    Introduced 8.0.4
    System Variable validate_password.special_char_count
    Scope Global
    Dynamic Yes
    SET_VAR Hint Applies No
    Type Integer
    Default Value 1
    Minimum Value 0

    The minimum number of nonalphanumeric characters that validate_password requires passwords to have if the password policy is MEDIUM or stronger. This variable is unavailable unless validate_password is installed.

 

Password Validation Component Status Variables

If the validate_password component is enabled, it exposes status variables that provide operational information:

  1. mysql> SHOW STATUS LIKE 'validate_password.%';
  2. +-----------------------------------------------+---------------------+
  3. | Variable_name                                 | Value               |
  4. +-----------------------------------------------+---------------------+
  5. | validate_password.dictionary_file_last_parsed | 2018-01-15 08:33:49 |
  6. | validate_password.dictionary_file_words_count | 1902                |
  7. +-----------------------------------------------+---------------------+

The following list describes the meaning of each status variable.

 

Password Validation Plugin Options
Note

In MySQL 8.0.4, the validate_password plugin was reimplemented as the validate_password component. The validate_password plugin is deprecated and will be removed in a future version of MySQL. Consequently, its options are also deprecated and will be removed. MySQL installations that use the plugin should make the transition to using the component instead. See Section 6.5.3.3, “Transitioning to the Password Validation Component”.

To control the activation of the validate_password plugin, use this option:

 

Password Validation Plugin System Variables
Note

In MySQL 8.0.4, the validate_password plugin was reimplemented as the validate_password component. The validate_password plugin is deprecated and will be removed in a future version of MySQL. Consequently, its system variables are also deprecated and will be removed. Use the corresponding system variables of the validate_password component; see Password Validation Component System Variables. MySQL installations that use the plugin should make the transition to using the component instead. See Section 6.5.3.3, “Transitioning to the Password Validation Component”.

 

Password Validation Plugin Status Variables
Note

In MySQL 8.0.4, the validate_password plugin was reimplemented as the validate_password component. The validate_password plugin is deprecated and will be removed in a future version of MySQL. Consequently, its status variables are also deprecated and will be removed. Use the corresponding status variables of the validate_password component; see Password Validation Component Status Variables. MySQL installations that use the plugin should make the transition to using the component instead. See Section 6.5.3.3, “Transitioning to the Password Validation Component”.


Rechercher dans le manuel MySQL

Traduction non disponible

Le manuel MySQL n'est pas encore traduit en français sur l'infobrol. Seule la version anglaise est disponible pour l'instant.

Document créé le 26/06/2006, dernière modification le 26/10/2018
Source du document imprimé : https://www.gaudry.be/mysql-rf-validate-password-options-variables.html

L'infobrol est un site personnel dont le contenu n'engage que moi. Le texte est mis à disposition sous licence CreativeCommons(BY-NC-SA). Plus d'info sur les conditions d'utilisation et sur l'auteur.

Références

  1. Consulter le document html Langue du document :en Manuel MySQL : https://dev.mysql.com/

Ces références et liens indiquent des documents consultés lors de la rédaction de cette page, ou qui peuvent apporter un complément d'information, mais les auteurs de ces sources ne peuvent être tenus responsables du contenu de cette page.
L'auteur de ce site est seul responsable de la manière dont sont présentés ici les différents concepts, et des libertés qui sont prises avec les ouvrages de référence. N'oubliez pas que vous devez croiser les informations de sources multiples afin de diminuer les risques d'erreurs.

Table des matières Haut