java.io

Class PipedInputStream

Table des matières
  • All Implemented Interfaces:
    Closeable, AutoCloseable

    public class PipedInputStream
extends InputStream
    A piped input stream should be connected to a piped output stream; the piped input stream then provides whatever data bytes are written to the piped output stream. Typically, data is read from a PipedInputStream object by one thread and data is written to the corresponding PipedOutputStream by some other thread. Attempting to use both objects from a single thread is not recommended, as it may deadlock the thread. The piped input stream contains a buffer, decoupling read operations from write operations, within limits. A pipe is said to be broken if a thread that was providing data bytes to the connected piped output stream is no longer alive.
    Since:
    JDK1.0
    See Also:
    PipedOutputStream

    • Field Summary

      Fields 
      Modifier and Type Field and Description
      protected byte[] buffer
      The circular buffer into which incoming data is placed.
      protected int in
      The index of the position in the circular buffer at which the next byte of data will be stored when received from the connected piped output stream.
      protected int out
      The index of the position in the circular buffer at which the next byte of data will be read by this piped input stream.
      protected static int PIPE_SIZE
      The default size of the pipe's circular input buffer.

        

    • Constructor Summary

      Constructors 
      Constructor and Description
      PipedInputStream()
      Creates a PipedInputStream so that it is not yet connected.
      PipedInputStream(int pipeSize)
      Creates a PipedInputStream so that it is not yet connected and uses the specified pipe size for the pipe's buffer.
      PipedInputStream(PipedOutputStream src)
      Creates a PipedInputStream so that it is connected to the piped output stream src.
      PipedInputStream(PipedOutputStream src, int pipeSize)
      Creates a PipedInputStream so that it is connected to the piped output stream src and uses the specified pipe size for the pipe's buffer.

        

    • Method Summary

      Methods 
      Modifier and Type Method and Description
      int available()
      Returns the number of bytes that can be read from this input stream without blocking.
      void close()
      Closes this piped input stream and releases any system resources associated with the stream.
      void connect(PipedOutputStream src)
      Causes this piped input stream to be connected to the piped output stream src.
      int read()
      Reads the next byte of data from this piped input stream.
      int read(byte[] b, int off, int len)
      Reads up to len bytes of data from this piped input stream into an array of bytes.
      protected void receive(int b)
      Receives a byte of data.

        

    • Field Detail

      • PIPE_SIZE

        protected static final int PIPE_SIZE
        The default size of the pipe's circular input buffer.
        Since:
        JDK1.1
        See Also:
        Constant Field Values

      • buffer

        protected byte[] buffer
        The circular buffer into which incoming data is placed.
        Since:
        JDK1.1

      • in

        protected int in
        The index of the position in the circular buffer at which the next byte of data will be stored when received from the connected piped output stream. in<0 implies the buffer is empty, in==out implies the buffer is full
        Since:
        JDK1.1

      • out

        protected int out
        The index of the position in the circular buffer at which the next byte of data will be read by this piped input stream.
        Since:
        JDK1.1

    • Constructor Detail

      • PipedInputStream

        public PipedInputStream(PipedOutputStream src)
                 throws IOException
        Creates a PipedInputStream so that it is connected to the piped output stream src. Data bytes written to src will then be available as input from this stream.
        Parameters:
        src - the stream to connect to.
        Throws:
        IOException - if an I/O error occurs.

      • PipedInputStream

        public PipedInputStream(PipedOutputStream src,
                int pipeSize)
                 throws IOException
        Creates a PipedInputStream so that it is connected to the piped output stream src and uses the specified pipe size for the pipe's buffer. Data bytes written to src will then be available as input from this stream.
        Parameters:
        src - the stream to connect to.
        pipeSize - the size of the pipe's buffer.
        Throws:
        IOException - if an I/O error occurs.
        IllegalArgumentException - if pipeSize <= 0.
        Since:
        1.6

      • PipedInputStream

        public PipedInputStream()
        Creates a PipedInputStream so that it is not yet connected. It must be connected to a PipedOutputStream before being used.

      • PipedInputStream

        public PipedInputStream(int pipeSize)
        Creates a PipedInputStream so that it is not yet connected and uses the specified pipe size for the pipe's buffer. It must be connected to a PipedOutputStream before being used.
        Parameters:
        pipeSize - the size of the pipe's buffer.
        Throws:
        IllegalArgumentException - if pipeSize <= 0.
        Since:
        1.6

    • Method Detail

      • connect

        public void connect(PipedOutputStream src)
             throws IOException
        Causes this piped input stream to be connected to the piped output stream src. If this object is already connected to some other piped output stream, an IOException is thrown.

        If src is an unconnected piped output stream and snk is an unconnected piped input stream, they may be connected by either the call: 

        snk.connect(src)

        or the call: 

        src.connect(snk)

        The two calls have the same effect.

        Parameters:
        src - The piped output stream to connect to.
        Throws:
        IOException - if an I/O error occurs.

      • receive

        protected void receive(int b)
                throws IOException
        Receives a byte of data. This method will block if no input is available.
        Parameters:
        b - the byte being received
        Throws:
        IOException - If the pipe is broken, unconnected, closed, or if an I/O error occurs.
        Since:
        JDK1.1

      • read

        public int read()
         throws IOException
        Reads the next byte of data from this piped input stream. The value byte is returned as an int in the range 0 to 255. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.
        Specified by:
        read in class InputStream
        Returns:
        the next byte of data, or -1 if the end of the stream is reached.
        Throws:
        IOException - if the pipe is unconnected, broken, closed, or if an I/O error occurs.

      • read

        public int read(byte[] b,
       int off,
       int len)
         throws IOException
        Reads up to len bytes of data from this piped input stream into an array of bytes. Less than len bytes will be read if the end of the data stream is reached or if len exceeds the pipe's buffer size. If len is zero, then no bytes are read and 0 is returned; otherwise, the method blocks until at least 1 byte of input is available, end of the stream has been detected, or an exception is thrown.
        Overrides:
        read in class InputStream
        Parameters:
        b - the buffer into which the data is read.
        off - the start offset in the destination array b
        len - the maximum number of bytes read.
        Returns:
        the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
        Throws:
        NullPointerException - If b is null.
        IndexOutOfBoundsException - If off is negative, len is negative, or len is greater than b.length - off
        IOException - if the pipe is broken, unconnected, closed, or if an I/O error occurs.
        See Also:
        InputStream.read()

      • available

        public int available()
              throws IOException
        Returns the number of bytes that can be read from this input stream without blocking.
        Overrides:
        available in class InputStream
        Returns:
        the number of bytes that can be read from this input stream without blocking, or 0 if this input stream has been closed by invoking its close() method, or if the pipe is unconnected, or broken.
        Throws:
        IOException - if an I/O error occurs.
        Since:
        JDK1.0.2

Traduction non disponible

Les API Java ne sont pas encore traduites en français sur l'infobrol. Seule la version anglaise est disponible pour l'instant.

Version en cache

21/12/2024 20:43:41 Cette version de la page est en cache (à la date du 21/12/2024 20:43:41) afin d'accélérer le traitement. Vous pouvez activer le mode utilisateur dans le menu en haut pour afficher la dernère version de la page.

Document créé le 29/08/2006, dernière modification le 04/03/2020
Source du document imprimé : https://www.gaudry.be/java-api-rf-java/io/PipedInputStream.html

L'infobrol est un site personnel dont le contenu n'engage que moi. Le texte est mis à disposition sous licence CreativeCommons(BY-NC-SA). Plus d'info sur les conditions d'utilisation et sur l'auteur.

Références

  1. Consulter le document html Langue du document :fr Manuel PHP : https://docs.oracle.com, PipedInputStream

Ces références et liens indiquent des documents consultés lors de la rédaction de cette page, ou qui peuvent apporter un complément d'information, mais les auteurs de ces sources ne peuvent être tenus responsables du contenu de cette page.
L'auteur de ce site est seul responsable de la manière dont sont présentés ici les différents concepts, et des libertés qui sont prises avec les ouvrages de référence. N'oubliez pas que vous devez croiser les informations de sources multiples afin de diminuer les risques d'erreurs.

Table des matières Haut