This function is not (yet) binary safe!
Description
$str
[, string $salt
] ) : stringcrypt() will return a hashed string using the standard Unix DES-based algorithm or alternative algorithms that may be available on the system.
The salt parameter is optional. However, crypt() creates a weak hash without the salt. PHP 5.6 or later raise an E_NOTICE error without it. Make sure to specify a strong enough salt for better security.
password_hash() uses a strong hash, generates a strong salt, and applies proper rounds automatically. password_hash() is a simple crypt() wrapper and compatible with existing password hashes. Use of password_hash() is encouraged.
Some operating systems support more than one type of hash. In
fact, sometimes the standard DES-based algorithm is replaced by an
MD5-based algorithm. The hash type is triggered by the salt argument.
Prior to 5.3, PHP would determine the available algorithms at install-time
based on the system's crypt(). If no salt is provided, PHP will
auto-generate either a standard two character (DES) salt, or a twelve
character (MD5), depending on the availability of MD5 crypt(). PHP sets a
constant named CRYPT_SALT_LENGTH which indicates the
longest valid salt allowed by the available hashes.
The standard DES-based crypt() returns the
salt as the first two characters of the output. It also only uses the
first eight characters of str, so longer strings
that start with the same eight characters will generate the same result
(when the same salt is used).
On systems where the crypt() function supports multiple hash types, the following constants are set to 0 or 1 depending on whether the given type is available:
-
CRYPT_STD_DES- Standard DES-based hash with a two character salt from the alphabet "./0-9A-Za-z". Using invalid characters in the salt will cause crypt() to fail. -
CRYPT_EXT_DES- Extended DES-based hash. The "salt" is a 9-character string consisting of an underscore followed by 4 bytes of iteration count and 4 bytes of salt. These are encoded as printable characters, 6 bits per character, least significant character first. The values 0 to 63 are encoded as "./0-9A-Za-z". Using invalid characters in the salt will cause crypt() to fail. -
CRYPT_MD5- MD5 hashing with a twelve character salt starting with $1$ -
CRYPT_BLOWFISH- Blowfish hashing with a salt as follows: "$2a$", "$2x$" or "$2y$", a two digit cost parameter, "$", and 22 characters from the alphabet "./0-9A-Za-z". Using characters outside of this range in the salt will cause crypt() to return a zero-length string. The two digit cost parameter is the base-2 logarithm of the iteration count for the underlying Blowfish-based hashing algorithmeter and must be in range 04-31, values outside this range will cause crypt() to fail. Versions of PHP before 5.3.7 only support "$2a$" as the salt prefix: PHP 5.3.7 introduced the new prefixes to fix a security weakness in the Blowfish implementation. Please refer to » this document for full details of the security fix, but to summarise, developers targeting only PHP 5.3.7 and later should use "$2y$" in preference to "$2a$". -
CRYPT_SHA256- SHA-256 hash with a sixteen character salt prefixed with $5$. If the salt string starts with 'rounds=<N>$', the numeric value of N is used to indicate how many times the hashing loop should be executed, much like the cost parameter on Blowfish. The default number of rounds is 5000, there is a minimum of 1000 and a maximum of 999,999,999. Any selection of N outside this range will be truncated to the nearest limit. -
CRYPT_SHA512- SHA-512 hash with a sixteen character salt prefixed with $6$. If the salt string starts with 'rounds=<N>$', the numeric value of N is used to indicate how many times the hashing loop should be executed, much like the cost parameter on Blowfish. The default number of rounds is 5000, there is a minimum of 1000 and a maximum of 999,999,999. Any selection of N outside this range will be truncated to the nearest limit.
Note:
As of PHP 5.3.0, PHP contains its own implementation and will use that if the system lacks of support for one or more of the algorithms.
Parameters
-
str -
The string to be hashed.
CautionUsing the
CRYPT_BLOWFISHalgorithm, will result in thestrparameter being truncated to a maximum length of 72 characters. -
salt -
An optional salt string to base the hashing on. If not provided, the behaviour is defined by the algorithm implementation and can lead to unexpected results.
Return Values
Returns the hashed string or a string that is shorter than 13 characters and is guaranteed to differ from the salt on failure.
When validating passwords, a string comparison function that isn't vulnerable to timing attacks should be used to compare the output of crypt() to the previously known hash. PHP 5.6 onwards provides hash_equals() for this purpose.
Changelog
| Version | Description |
|---|---|
| 5.6.5 |
When the failure string "*0" is given as the
salt, "*1" will now be returned for consistency
with other crypt implementations. Prior to this version, PHP 5.6 would
incorrectly return a DES hash.
|
| 5.6.0 |
Raise E_NOTICE security warning if salt is omitted.
|
| 5.5.21 |
When the failure string "*0" is given as the
salt, "*1" will now be returned for consistency
with other crypt implementations. Prior to this version, PHP 5.5 (and
earlier branches) would incorrectly return a DES hash.
|
| 5.3.7 | Added $2x$ and $2y$ Blowfish modes to deal with potential high-bit attacks. |
| 5.3.2 | Added SHA-256 and SHA-512 crypt based on Ulrich Drepper's » implementation. |
| 5.3.2 | Fixed Blowfish behaviour on invalid rounds to return "failure" string ("*0" or "*1"), instead of falling back to DES. |
| 5.3.0 | PHP now contains its own implementation for the MD5 crypt, Standard DES, Extended DES and the Blowfish algorithms and will use that if the system lacks of support for one or more of the algorithms. |
Examples
Example #1 crypt() examples
<?php
$hashed_password = crypt('mypassword'); // let the salt be automatically generated
/* You should pass the entire results of crypt() as the salt for comparing a
password, to avoid problems when different hashing algorithms are used. (As
it says above, standard DES-based password hashing uses a 2-character salt,
but MD5-based hashing uses 12.) */
if (hash_equals($hashed_password, crypt($user_input, $hashed_password))) {
echo "Password verified!";
}
?>
Example #2 Using crypt() with htpasswd
<?php
// Set the password
$password = 'mypassword';
// Get the hash, letting the salt be automatically generated
$hash = crypt($password);
?>
Example #3 Using crypt() with different hash types
<?php
/* These salts are examples only, and should not be used verbatim in your code.
You should generate a distinct, correctly-formatted salt for each password.
*/
if (CRYPT_STD_DES == 1) {
echo 'Standard DES: ' . crypt('rasmuslerdorf', 'rl') . "\n";
}
if (CRYPT_EXT_DES == 1) {
echo 'Extended DES: ' . crypt('rasmuslerdorf', '_J9..rasm') . "\n";
}
if (CRYPT_MD5 == 1) {
echo 'MD5: ' . crypt('rasmuslerdorf', '$1$rasmusle$') . "\n";
}
if (CRYPT_BLOWFISH == 1) {
echo 'Blowfish: ' . crypt('rasmuslerdorf', '$2a$07$usesomesillystringforsalt$') . "\n";
}
if (CRYPT_SHA256 == 1) {
echo 'SHA-256: ' . crypt('rasmuslerdorf', '$5$rounds=5000$usesomesillystringforsalt$') . "\n";
}
if (CRYPT_SHA512 == 1) {
echo 'SHA-512: ' . crypt('rasmuslerdorf', '$6$rounds=5000$usesomesillystringforsalt$') . "\n";
}
?>
The above example will output something similar to:
Standard DES: rl.3StKT.4T8M Extended DES: _J9..rasmBYk8r9AiWNc MD5: $1$rasmusle$rISCgZzpwk3UhDidwXvin0 Blowfish: $2a$07$usesomesillystringfore2uDLvp1Ii2e./U9C8sBjqp8I90dH6hi SHA-256: $5$rounds=5000$usesomesillystri$KqJWpanXZHKq2BOB43TSaYhEWsQ1Lr5QNyPCDH/Tp.6 SHA-512: $6$rounds=5000$usesomesillystri$D4IrlXatmP7rx3P3InaxBeoomnAihCKRVQP22JZ6EY47Wc6BkroIuUUBOov1i.S5KPgErtP/EN5mcO.ChWQW21
See Also
- hash_equals() - Timing attack safe string comparison
- password_hash() - Creates a password hash
- md5() - Calculate the md5 hash of a string
- The Mcrypt extension
- The Unix man page for your crypt function for more information
English translation
You have asked to visit this site in English. For now, only the interface is translated, but not all the content yet.If you want to help me in translations, your contribution is welcome. All you need to do is register on the site, and send me a message asking me to add you to the group of translators, which will give you the opportunity to translate the pages you want. A link at the bottom of each translated page indicates that you are the translator, and has a link to your profile.
Thank you in advance.
Document created the 30/01/2003, last modified the 26/10/2018
Source of the printed document:https://www.gaudry.be/en/php-rf-function.crypt.html
The infobrol is a personal site whose content is my sole responsibility. The text is available under CreativeCommons license (BY-NC-SA). More info on the terms of use and the author.
References
These references and links indicate documents consulted during the writing of this page, or which may provide additional information, but the authors of these sources can not be held responsible for the content of this page.
The author This site is solely responsible for the way in which the various concepts, and the freedoms that are taken with the reference works, are presented here. Remember that you must cross multiple source information to reduce the risk of errors.
