Rechercher une fonction PHP

fopen

(PHP 4, PHP 5, PHP 7)

fopenOpens file or URL

Description

fopen ( string $filename , string $mode [, bool $use_include_path = FALSE [, resource $context ]] ) : resource

fopen() binds a named resource, specified by filename, to a stream.

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Parameters

filename

If filename is of the form "scheme://...", it is assumed to be a URL and PHP will search for a protocol handler (also known as a wrapper) for that scheme. If no wrappers for that protocol are registered, PHP will emit a notice to help you track potential problems in your script and then continue as though filename specifies a regular file.

If PHP has decided that filename specifies a local file, then it will try to open a stream on that file. The file must be accessible to PHP, so you need to ensure that the file access permissions allow this access. If you have enabled safe mode or open_basedir further restrictions may apply.

If PHP has decided that filename specifies a registered protocol, and that protocol is registered as a network URL, PHP will check to make sure that allow_url_fopen is enabled. If it is switched off, PHP will emit a warning and the fopen call will fail.

Note:

The list of supported protocols can be found in Supported Protocols and Wrappers. Some protocols (also referred to as wrappers) support context and/or php.ini options. Refer to the specific page for the protocol in use for a list of options which can be set. (e.g. php.ini value user_agent used by the http wrapper).

On the Windows platform, be careful to escape any backslashes used in the path to the file, or use forward slashes.

<?php
$handle 
fopen("c:\\folder\\resource.txt""r");
?>

mode

The mode parameter specifies the type of access you require to the stream. It may be any of the following:

A list of possible modes for fopen() using mode
mode Description
'r' Open for reading only; place the file pointer at the beginning of the file.
'r+' Open for reading and writing; place the file pointer at the beginning of the file.
'w' Open for writing only; place the file pointer at the beginning of the file and truncate the file to zero length. If the file does not exist, attempt to create it.
'w+' Open for reading and writing; place the file pointer at the beginning of the file and truncate the file to zero length. If the file does not exist, attempt to create it.
'a' Open for writing only; place the file pointer at the end of the file. If the file does not exist, attempt to create it. In this mode, fseek() has no effect, writes are always appended.
'a+' Open for reading and writing; place the file pointer at the end of the file. If the file does not exist, attempt to create it. In this mode, fseek() only affects the reading position, writes are always appended.
'x' Create and open for writing only; place the file pointer at the beginning of the file. If the file already exists, the fopen() call will fail by returning FALSE and generating an error of level E_WARNING. If the file does not exist, attempt to create it. This is equivalent to specifying O_EXCL|O_CREAT flags for the underlying open(2) system call.
'x+' Create and open for reading and writing; otherwise it has the same behavior as 'x'.
'c' Open the file for writing only. If the file does not exist, it is created. If it exists, it is neither truncated (as opposed to 'w'), nor the call to this function fails (as is the case with 'x'). The file pointer is positioned on the beginning of the file. This may be useful if it's desired to get an advisory lock (see flock()) before attempting to modify the file, as using 'w' could truncate the file before the lock was obtained (if truncation is desired, ftruncate() can be used after the lock is requested).
'c+' Open the file for reading and writing; otherwise it has the same behavior as 'c'.
'e' Set close-on-exec flag on the opened file descriptor. Only available in PHP compiled on POSIX.1-2008 conform systems.

Note:

Different operating system families have different line-ending conventions. When you write a text file and want to insert a line break, you need to use the correct line-ending character(s) for your operating system. Unix based systems use \n as the line ending character, Windows based systems use \r\n as the line ending characters and Macintosh based systems use \r as the line ending character.

If you use the wrong line ending characters when writing your files, you might find that other applications that open those files will "look funny".

Windows offers a text-mode translation flag ('t') which will transparently translate \n to \r\n when working with the file. In contrast, you can also use 'b' to force binary mode, which will not translate your data. To use these flags, specify either 'b' or 't' as the last character of the mode parameter.

The default translation mode depends on the SAPI and version of PHP that you are using, so you are encouraged to always specify the appropriate flag for portability reasons. You should use the 't' mode if you are working with plain-text files and you use \n to delimit your line endings in your script, but expect your files to be readable with applications such as notepad. You should use the 'b' in all other cases.

If you do not specify the 'b' flag when working with binary files, you may experience strange problems with your data, including broken image files and strange problems with \r\n characters.

Note:

For portability, it is strongly recommended that you always use the 'b' flag when opening files with fopen().

Note:

Again, for portability, it is also strongly recommended that you re-write code that uses or relies upon the 't' mode so that it uses the correct line endings and 'b' mode instead.

use_include_path

The optional third use_include_path parameter can be set to '1' or TRUE if you want to search for the file in the include_path, too.

context

Note: Context support was added with PHP 5.0.0. For a description of contexts, refer to Streams.

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Return Values

Returns a file pointer resource on success, or FALSE on failure

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Errors/Exceptions

Upon failure, an E_WARNING is emitted.

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Changelog

Version Description
7.0.16, 7.1.2 The 'e' option was added.
5.2.6 The 'c' and 'c+' options were added

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Examples

Example #1 fopen() examples

<?php
$handle 
fopen("/home/rasmus/file.txt""r");
$handle fopen("/home/rasmus/file.gif""wb");
$handle fopen("http://www.example.com/""r");
$handle fopen("ftp://user:password@example.com/somefile.txt""w");
?>

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

Notes

Warning

When using SSL, Microsoft IIS will violate the protocol by closing the connection without sending a close_notify indicator. PHP will report this as "SSL: Fatal Protocol Error" when you reach the end of the data. To work around this, the value of error_reporting should be lowered to a level that does not include warnings. PHP can detect buggy IIS server software when you open the stream using the https:// wrapper and will suppress the warning. When using fsockopen() to create an ssl:// socket, the developer is responsible for detecting and suppressing this warning.

Note: When safe mode is enabled, PHP checks whether the directory in which the script is operating has the same UID (owner) as the script that is being executed.

Note:

If you are experiencing problems with reading and writing to files and you're using the server module version of PHP, remember to make sure that the files and directories you're using are accessible to the server process.

Note:

This function may also succeed when filename is a directory. If you are unsure whether filename is a file or a directory, you may need to use the is_dir() function before calling fopen().

PHP: fopen - Manual Home of Manuel PHP  Contents Haut

See Also

Find a PHP function

English translation

You have asked to visit this site in English. For now, only the interface is translated, but not all the content yet.

If you want to help me in translations, your contribution is welcome. All you need to do is register on the site, and send me a message asking me to add you to the group of translators, which will give you the opportunity to translate the pages you want. A link at the bottom of each translated page indicates that you are the translator, and has a link to your profile.

Thank you in advance.

Document created the 30/01/2003, last modified the 26/10/2018
Source of the printed document:https://www.gaudry.be/en/php-rf-fopen.html

The infobrol is a personal site whose content is my sole responsibility. The text is available under CreativeCommons license (BY-NC-SA). More info on the terms of use and the author.

References

  1. View the html document Language of the document:fr Manuel PHP : http://php.net

These references and links indicate documents consulted during the writing of this page, or which may provide additional information, but the authors of these sources can not be held responsible for the content of this page.
The author This site is solely responsible for the way in which the various concepts, and the freedoms that are taken with the reference works, are presented here. Remember that you must cross multiple source information to reduce the risk of errors.

Contents Haut