Keine Cache-Version
Caching deaktiviert Standardeinstellung für diese Seite:aktiviert (code LNG204)
Wenn die Anzeige zu langsam ist, können Sie den Benutzermodus deaktivieren, um die zwischengespeicherte Version anzuzeigen.
Ncurses Funktionen
Inhaltsverzeichnis
- ncurses_addch — Add character at current position and advance cursor
- ncurses_addchnstr — Add attributed string with specified length at current position
- ncurses_addchstr — Add attributed string at current position
- ncurses_addnstr — Add string with specified length at current position
- ncurses_addstr — Output text at current position
- ncurses_assume_default_colors — Define default colors for color 0
- ncurses_attroff — Turn off the given attributes
- ncurses_attron — Turn on the given attributes
- ncurses_attrset — Set given attributes
- ncurses_baudrate — Returns baudrate of terminal
- ncurses_beep — Let the terminal beep
- ncurses_bkgd — Set background property for terminal screen
- ncurses_bkgdset — Control screen background
- ncurses_border — Draw a border around the screen using attributed characters
- ncurses_bottom_panel — Moves a visible panel to the bottom of the stack
- ncurses_can_change_color — Checks if terminal color definitions can be changed
- ncurses_cbreak — Switch off input buffering
- ncurses_clear — Clear screen
- ncurses_clrtobot — Clear screen from current position to bottom
- ncurses_clrtoeol — Clear screen from current position to end of line
- ncurses_color_content — Retrieves RGB components of a color
- ncurses_color_set — Set active foreground and background colors
- ncurses_curs_set — Set cursor state
- ncurses_def_prog_mode — Saves terminals (program) mode
- ncurses_def_shell_mode — Saves terminals (shell) mode
- ncurses_define_key — Define a keycode
- ncurses_del_panel — Remove panel from the stack and delete it (but not the associated window)
- ncurses_delay_output — Delay output on terminal using padding characters
- ncurses_delch — Delete character at current position, move rest of line left
- ncurses_deleteln — Delete line at current position, move rest of screen up
- ncurses_delwin — Delete a ncurses window
- ncurses_doupdate — Write all prepared refreshes to terminal
- ncurses_echo — Activate keyboard input echo
- ncurses_echochar — Single character output including refresh
- ncurses_end — Stop using ncurses, clean up the screen
- ncurses_erase — Erase terminal screen
- ncurses_erasechar — Returns current erase character
- ncurses_filter — Set LINES for iniscr() and newterm() to 1
- ncurses_flash — Flash terminal screen (visual bell)
- ncurses_flushinp — Flush keyboard input buffer
- ncurses_getch — Read a character from keyboard
- ncurses_getmaxyx — Returns the size of a window
- ncurses_getmouse — Reads mouse event
- ncurses_getyx — Returns the current cursor position for a window
- ncurses_halfdelay — Put terminal into halfdelay mode
- ncurses_has_colors — Checks if terminal has color capabilities
- ncurses_has_ic — Check for insert- and delete-capabilities
- ncurses_has_il — Check for line insert- and delete-capabilities
- ncurses_has_key — Check for presence of a function key on terminal keyboard
- ncurses_hide_panel — Remove panel from the stack, making it invisible
- ncurses_hline — Draw a horizontal line at current position using an attributed character and max. n characters long
- ncurses_inch — Get character and attribute at current position
- ncurses_init_color — Define a terminal color
- ncurses_init_pair — Define a color pair
- ncurses_init — Initialize ncurses
- ncurses_insch — Insert character moving rest of line including character at current position
- ncurses_insdelln — Insert lines before current line scrolling down (negative numbers delete and scroll up)
- ncurses_insertln — Insert a line, move rest of screen down
- ncurses_insstr — Insert string at current position, moving rest of line right
- ncurses_instr — Reads string from terminal screen
- ncurses_isendwin — Ncurses is in endwin mode, normal screen output may be performed
- ncurses_keyok — Enable or disable a keycode
- ncurses_keypad — Turns keypad on or off
- ncurses_killchar — Returns current line kill character
- ncurses_longname — Returns terminals description
- ncurses_meta — Enables/Disable 8-bit meta key information
- ncurses_mouse_trafo — Transforms coordinates
- ncurses_mouseinterval — Set timeout for mouse button clicks
- ncurses_mousemask — Sets mouse options
- ncurses_move_panel — Moves a panel so that its upper-left corner is at [startx, starty]
- ncurses_move — Move output position
- ncurses_mvaddch — Move current position and add character
- ncurses_mvaddchnstr — Move position and add attributed string with specified length
- ncurses_mvaddchstr — Move position and add attributed string
- ncurses_mvaddnstr — Move position and add string with specified length
- ncurses_mvaddstr — Move position and add string
- ncurses_mvcur — Move cursor immediately
- ncurses_mvdelch — Move position and delete character, shift rest of line left
- ncurses_mvgetch — Move position and get character at new position
- ncurses_mvhline — Set new position and draw a horizontal line using an attributed character and max. n characters long
- ncurses_mvinch — Move position and get attributed character at new position
- ncurses_mvvline — Set new position and draw a vertical line using an attributed character and max. n characters long
- ncurses_mvwaddstr — Add string at new position in window
- ncurses_napms — Sleep
- ncurses_new_panel — Create a new panel and associate it with window
- ncurses_newpad — Creates a new pad (window)
- ncurses_newwin — Create a new window
- ncurses_nl — Translate newline and carriage return / line feed
- ncurses_nocbreak — Switch terminal to cooked mode
- ncurses_noecho — Switch off keyboard input echo
- ncurses_nonl — Do not translate newline and carriage return / line feed
- ncurses_noqiflush — Do not flush on signal characters
- ncurses_noraw — Switch terminal out of raw mode
- ncurses_pair_content — Retrieves foreground and background colors of a color pair
- ncurses_panel_above — Returns the panel above panel
- ncurses_panel_below — Returns the panel below panel
- ncurses_panel_window — Returns the window associated with panel
- ncurses_pnoutrefresh — Copies a region from a pad into the virtual screen
- ncurses_prefresh — Copies a region from a pad into the virtual screen
- ncurses_putp — Apply padding information to the string and output it
- ncurses_qiflush — Flush on signal characters
- ncurses_raw — Switch terminal into raw mode
- ncurses_refresh — Refresh screen
- ncurses_replace_panel — Replaces the window associated with panel
- ncurses_reset_prog_mode — Resets the prog mode saved by def_prog_mode
- ncurses_reset_shell_mode — Resets the shell mode saved by def_shell_mode
- ncurses_resetty — Restores saved terminal state
- ncurses_savetty — Saves terminal state
- ncurses_scr_dump — Dump screen content to file
- ncurses_scr_init — Initialize screen from file dump
- ncurses_scr_restore — Restore screen from file dump
- ncurses_scr_set — Inherit screen from file dump
- ncurses_scrl — Scroll window content up or down without changing current position
- ncurses_show_panel — Places an invisible panel on top of the stack, making it visible
- ncurses_slk_attr — Returns current soft label key attribute
- ncurses_slk_attroff — Turn off the given attributes for soft function-key labels
- ncurses_slk_attron — Turn on the given attributes for soft function-key labels
- ncurses_slk_attrset — Set given attributes for soft function-key labels
- ncurses_slk_clear — Clears soft labels from screen
- ncurses_slk_color — Sets color for soft label keys
- ncurses_slk_init — Initializes soft label key functions
- ncurses_slk_noutrefresh — Copies soft label keys to virtual screen
- ncurses_slk_refresh — Copies soft label keys to screen
- ncurses_slk_restore — Restores soft label keys
- ncurses_slk_set — Sets function key labels
- ncurses_slk_touch — Forces output when ncurses_slk_noutrefresh is performed
- ncurses_standend — Stop using 'standout' attribute
- ncurses_standout — Start using 'standout' attribute
- ncurses_start_color — Initializes color functionality
- ncurses_termattrs — Returns a logical OR of all attribute flags supported by terminal
- ncurses_termname — Returns terminals (short)-name
- ncurses_timeout — Set timeout for special key sequences
- ncurses_top_panel — Moves a visible panel to the top of the stack
- ncurses_typeahead — Specify different filedescriptor for typeahead checking
- ncurses_ungetch — Put a character back into the input stream
- ncurses_ungetmouse — Pushes mouse event to queue
- ncurses_update_panels — Refreshes the virtual screen to reflect the relations between panels in the stack
- ncurses_use_default_colors — Assign terminal default colors to color id -1
- ncurses_use_env — Control use of environment information about terminal size
- ncurses_use_extended_names — Control use of extended names in terminfo descriptions
- ncurses_vidattr — Display the string on the terminal in the video attribute mode
- ncurses_vline — Draw a vertical line at current position using an attributed character and max. n characters long
- ncurses_waddch — Adds character at current position in a window and advance cursor
- ncurses_waddstr — Outputs text at current postion in window
- ncurses_wattroff — Turns off attributes for a window
- ncurses_wattron — Turns on attributes for a window
- ncurses_wattrset — Set the attributes for a window
- ncurses_wborder — Draws a border around the window using attributed characters
- ncurses_wclear — Clears window
- ncurses_wcolor_set — Sets windows color pairings
- ncurses_werase — Erase window contents
- ncurses_wgetch — Reads a character from keyboard (window)
- ncurses_whline — Draws a horizontal line in a window at current position using an attributed character and max. n characters long
- ncurses_wmouse_trafo — Transforms window/stdscr coordinates
- ncurses_wmove — Moves windows output position
- ncurses_wnoutrefresh — Copies window to virtual screen
- ncurses_wrefresh — Refresh window on terminal screen
- ncurses_wstandend — End standout mode for a window
- ncurses_wstandout — Enter standout mode for a window
- ncurses_wvline — Draws a vertical line in a window at current position using an attributed character and max. n characters long
Deutsche Übersetzung
Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.
Vielen Dank im Voraus.
Dokument erstellt 30/01/2003, zuletzt geändert 26/10/2018
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/php-rf-ref.ncurses.html
Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.
Referenzen
Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.