Rechercher dans le manuel MySQL
22.3.2.1 NDB Cluster Data Node Configuration Parameters
The listings in this section provide information about
parameters used in the [ndbd]
or
[ndbd default]
sections of a
config.ini
file for configuring NDB Cluster
data nodes. For detailed descriptions and other additional
information about each of these parameters, see
Section 22.3.3.6, “Defining NDB Cluster Data Nodes”.
These parameters also apply to ndbmtd, the multithreaded version of ndbd. For more information, see Section 22.4.3, “ndbmtd — The NDB Cluster Data Node Daemon (Multi-Threaded)”.
Arbitration
: How arbitration should be performed to avoid split-brain issues in the event of node failure.ArbitrationTimeout
: Maximum time (milliseconds) database partition waits for arbitration signalBackupDataBufferSize
: Default size of databuffer for a backup (in bytes)BackupDataDir
: Path to where to store backups. Note that the string '/BACKUP' is always appended to this setting, so that the *effective* default is FileSystemPath/BACKUP.BackupDiskWriteSpeedPct
: Sets the percentage of the data node's allocated maximum write speed (MaxDiskWriteSpeed) to reserve for LCPs when starting abackup.BackupLogBufferSize
: Default size of log buffer for a backup (in bytes)BackupMaxWriteSize
: Maximum size of file system writes made by backup (in bytes)BackupMemory
: Total memory allocated for backups per node (in bytes)BackupReportFrequency
: Frequency of backup status reports during backup in secondsBackupWriteSize
: Default size of file system writes made by backup (in bytes)BatchSizePerLocalScan
: Used to calculate the number of lock records for scan with hold lockBuildIndexThreads
: Number of threads to use for building ordered indexes during a system or node restart. Also applies when running ndb_restore --rebuild-indexes. Setting this parameter to 0 disables multithreaded building of ordered indexes.CompressedBackup
: Use zlib to compress backups as they are writtenCompressedLCP
: Write compressed LCPs using zlibConnectCheckIntervalDelay
: Time between data node connectivity check stages. Data node is considered suspect after 1 interval and dead after 2 intervals with no response.CrashOnCorruptedTuple
: When enabled, forces node to shut down whenever it detects a corrupted tuple.DataDir
: Data directory for this nodeDataMemory
: Number of bytes on each data node allocated for storing data; subject to available system RAM.DefaultHashMapSize
: Set size (in buckets) to use for table hash maps. Three values are supported: 0, 240, and 3840. Intended primarily for upgrades and downgrades within NDB 7.2.DictTrace
: Enable DBDICT debugging; for NDB developmentDiskIOThreadPool
: Number of unbound threads for file access (currently only for Disk Data); known as IOThreadPool before MySQL Cluster NDB 6.4.3.Diskless
: Run without using the diskDiskPageBufferEntries
: Number of 32K page entries to allocate in DiskPageBufferMemory. Very large disk transactions may require increasing this value.DiskPageBufferMemory
: Number of bytes on each data node allocated for the disk page buffer cacheDiskSyncSize
: Amount of data written to file before a synch is forcedEnablePartialLcp
: Enable partial LCP (true); if this disabled (false), all LCPs write full checkpoints.EnableRedoControl
: Enable adaptive checkpointing speed for controlling redo log usageEventLogBufferSize
: Size of circular buffer for NDB log events within data nodes.ExecuteOnComputer
: String referencing an earlier defined COMPUTERExtraSendBufferMemory
: Memory to use for send buffers in addition to any allocated by TotalSendBufferMemory or SendBufferMemory. Default (0) allows up to 16MB.FileSystemPath
: Path to directory where the data node stores its data (directory must exist)FileSystemPathDataFiles
: Path to directory where the data node stores its Disk Data files. The default value is FilesystemPathDD, if set; otherwise, FilesystemPath is used if it is set; otherwise, the value of DataDir is used.FileSystemPathDD
: Path to directory where the data node stores its Disk Data and undo files. The default value is FileSystemPath, if set; otherwise, the value of DataDir is used.FileSystemPathUndoFiles
: Path to directory where the data node stores its undo files for Disk Data. The default value is FilesystemPathDD, if set; otherwise, FilesystemPath is used if it is set; otherwise, the value of DataDir is used.FragmentLogFileSize
: Size of each redo log fileHeartbeatIntervalDbApi
: Time between API node-data node heartbeats. (API connection closed after 3 missed heartbeats)HeartbeatIntervalDbDb
: Time between data node-to-data node heartbeats; data node considered dead after 3 missed heartbeatsHeartbeatOrder
: Sets the order in which data nodes check each others' heartbeats for determining whether a given node is still active and connected to the cluster. Must be zero for all data nodes or distinct nonzero values for all data nodes; see documentation for further guidance.HostName
: Host name or IP address for this data node.IndexMemory
: Deprecated.IndexStatAutoCreate
: Enable/disable automatic statistics collection when indexes are created.IndexStatAutoUpdate
: Monitor indexes for changes and trigger automatic statistics updatesIndexStatSaveScale
: Scaling factor used in determining size of stored index statistics.IndexStatSaveSize
: Maximum size in bytes for saved statistics per index.IndexStatTriggerPct
: Threshold percent change in DML operations for index statistics updates. The value is scaled down by IndexStatTriggerScale.IndexStatTriggerScale
: Scale down IndexStatTriggerPct by this amount, multiplied by the base 2 logarithm of the index size, for a large index. Set to 0 to disable scaling.IndexStatUpdateDelay
: Minimum delay between automatic index statistics updates for a given index. 0 means no delay.InitFragmentLogFiles
: Initialize fragment logfiles (sparse/full)InitialLogFileGroup
: Describes a log file group that is created during an initial start. See documentation for format.InitialNoOfOpenFiles
: Initial number of files open per data node. (One thread is created per file)InitialTablespace
: Describes a tablespace that is created during an initial start. See documentation for format.InsertRecoveryWork
: Percentage of RecoveryWork used for inserted rows; has no effect unless partial local checkpoints are in use.LateAlloc
: Allocate memory after the connection to the management server has been established.LcpScanProgressTimeout
: Maximum time that local checkpoint fragment scan can be stalled before node is shut down to ensure systemwide LCP progress. Use 0 to disable.LockExecuteThreadToCPU
: A comma-delimited list of CPU IDsLockMaintThreadsToCPU
: CPU ID indicating which CPU runs the maintenance threadsLockPagesInMainMemory
: 0=disable locking, 1=lock after memory allocation, 2=lock before memory allocationLogLevelCheckpoint
: Log level of local and global checkpoint information printed to stdoutLogLevelCongestion
: Level of congestion information printed to stdoutLogLevelConnection
: Level of node connect/disconnect information printed to stdoutLogLevelError
: Transporter, heartbeat errors printed to stdoutLogLevelInfo
: Heartbeat and log information printed to stdoutLogLevelNodeRestart
: Level of node restart and node failure information printed to stdoutLogLevelShutdown
: Level of node shutdown information printed to stdoutLogLevelStartup
: Level of node startup information printed to stdoutLogLevelStatistic
: Level of transaction, operation, and transporter information printed to stdoutLongMessageBuffer
: Number of bytes allocated on each data node for internal long messagesMaxAllocate
: Maximum size of allocation to use when allocating memory for tablesMaxBufferedEpochs
: Allowed numbered of epochs that a subscribing node can lag behind (unprocessed epochs). Exceeding will cause lagging subscribers to be disconnected.MaxBufferedEpochBytes
: Total number of bytes allocated for buffering epochs.MaxDiskWriteSpeed
: Maximum number of bytes per second that can be written by LCP and backup when no restarts are ongoing.MaxDiskWriteSpeedOtherNodeRestart
: Maximum number of bytes per second that can be written by LCP and backup when another node is restarting.MaxDiskWriteSpeedOwnRestart
: Maximum number of bytes per second that can be written by LCP and backup when this node is restarting.MaxFKBuildBatchSize
: Maximum scan batch size to use for building foreign keys. Increasing this value may speed up builds of foreign keys but impacts ongoing traffic as well.MaxDMLOperationsPerTransaction
: Limit size of a transaction; aborts the transaction if it requires more than this many DML operations. Set to 0 to disable.MaxLCPStartDelay
: Time in seconds that LCP polls for checkpoint mutex (to allow other data nodes to complete metadata synchronization), before putting itself in lock queue for parallel recovery of table data.MaxNoOfAttributes
: Suggests a total number of attributes stored in database (sum over all tables)MaxNoOfConcurrentIndexOperations
: Total number of index operations that can execute simultaneously on one data nodeMaxNoOfConcurrentOperations
: Maximum number of operation records in transaction coordinatorMaxNoOfConcurrentScans
: Maximum number of scans executing concurrently on the data nodeMaxNoOfConcurrentSubOperations
: Maximum number of concurrent subscriber operationsMaxNoOfConcurrentTransactions
: Maximum number of transactions executing concurrently on this data node, the total number of transactions that can be executed concurrently is this value times the number of data nodes in the cluster.MaxNoOfFiredTriggers
: Total number of triggers that can fire simultaneously on one data nodeMaxNoOfLocalOperations
: Maximum number of operation records defined on this data nodeMaxNoOfLocalScans
: Maximum number of fragment scans in parallel on this data nodeMaxNoOfOpenFiles
: Maximum number of files open per data node.(One thread is created per file)MaxNoOfOrderedIndexes
: Total number of ordered indexes that can be defined in the systemMaxNoOfSavedMessages
: Maximum number of error messages to write in error log and maximum number of trace files to retainMaxNoOfSubscribers
: Maximum number of subscribers (default 0 = MaxNoOfTables * 2)MaxNoOfSubscriptions
: Maximum number of subscriptions (default 0 = MaxNoOfTables)MaxNoOfTables
: Suggests a total number of NDB tables stored in the databaseMaxNoOfTriggers
: Total number of triggers that can be defined in the systemMaxNoOfUniqueHashIndexes
: Total number of unique hash indexes that can be defined in the systemMaxParallelCopyInstances
: Number of parallel copies during node restarts. Default is 0, which uses number of LDMs on both nodes, to a maximum of 16.MaxParallelScansPerFragment
: Maximum number of parallel scans per fragment. Once this limit is reached, scans are serialized.MaxReorgBuildBatchSize
: Maximum scan batch size to use for reorganization of table partitions. Increasing this value may speed up table partition reorganization but impacts ongoing traffic as well.MaxStartFailRetries
: Maximum retries when data node fails on startup, requires StopOnError = 0. Setting to 0 causes start attempts to continue indefinitely.MaxUIBuildBatchSize
: Maximum scan batch size to use for building unique keys. Increasing this value may speed up builds of unique keys but impacts ongoing traffic as well.MemReportFrequency
: Frequency of memory reports in seconds; 0 = report only when exceeding percentage limitsMinDiskWriteSpeed
: Minimum number of bytes per second that can be written by LCP and backup.MinFreePct
: The percentage of memory resources to keep in reserve for restarts.NodeGroup
: Node group to which the data node belongs; used only during initial start of cluster.NodeId
: Number uniquely identifying the data node among all nodes in the cluster.NoOfFragmentLogFiles
: Number of 16 MB redo log files in each of 4 file sets belonging to the data nodeNoOfReplicas
: Number of copies of all data in database; recommended value is 2 (default). Values greater than 2 are not supported in production.Numa
: (Linux only; requires libnuma) Controls NUMA support. Setting to 0 permits system to determine use of interleaving by data node process; 1 means that it is determined by data node.ODirect
: Use O_DIRECT file reads and writes when possible.ODirectSyncFlag
: O_DIRECT writes are treated as synchronized writes; ignored when ODirect is not enabled, InitFragmentLogFiles is set to SPARSE, or both.RealtimeScheduler
: When true, data node threads are scheduled as real-time threads. Default is false.RecoveryWork
: Percentage of storage overhead for LCP files: greater value means less work in normal operations, more work during recoveryRedoBuffer
: Number of bytes on each data node allocated for writing redo logsRedoOverCommitCounter
: When RedoOverCommitLimit has been exceeded this many times, transactions are aborted, and operations are handled as specified by DefaultOperationRedoProblemActionRedoOverCommitLimit
: Each time that flushing the current redo buffer takes longer than this many seconds, the number of times that this has happened is compared to RedoOverCommitCounter.ReservedConcurrentIndexOperations
: Number of simultaneous index operations having dedicated resources on one data nodeReservedConcurrentOperations
: Number of simultaneous operations having dedicated resources in transaction coordinators on one data nodeReservedConcurrentScans
: Number of simultaneous scans having dedicated resources on one data nodeReservedConcurrentTransactions
: Number of simultaneous transactions having dedicated resources on one data nodeReservedFiredTriggers
: Number of triggers having dedicated resources on one data nodeReservedLocalScans
: Number of simultaneous fragment scans having dedicated resources on one data nodeReservedTransactionBufferMemory
: Dynamic buffer space (in bytes) for key and attribute data allocated to each data nodeRestartOnErrorInsert
: Control the type of restart caused by inserting an error (when StopOnError is enabled)SchedulerExecutionTimer
: Number of microseconds to execute in scheduler before sendingSchedulerResponsiveness
: Set NDB scheduler response optimization 0-10; higher values provide better response time but lower throughputSchedulerSpinTimer
: Number of microseconds to execute in scheduler before sleepingServerPort
: Port used to set up transporter for incoming connections from API nodesSharedGlobalMemory
: Total number of bytes on each data node allocated for any useStartFailRetryDelay
: Delay in seconds after start failure prior to retry; requires StopOnError = 0.StartFailureTimeout
: Milliseconds to wait before terminating. (0=Wait forever)StartNoNodeGroupTimeout
: Time to wait for nodes without a nodegroup before trying to start (0=forever)StartPartialTimeout
: Milliseconds to wait before trying to start without all nodes. (0=Wait forever)StartPartitionedTimeout
: Milliseconds to wait before trying to start partitioned. (0=Wait forever)StartupStatusReportFrequency
: Frequency of status reports during startupStopOnError
: When set to 0, the data node automatically restarts and recovers following node failuresStringMemory
: Default size of string memory (0 to 100 = % of maximum, 101+ = actual bytes)TcpBind_INADDR_ANY
: Bind IP_ADDR_ANY so that connections can be made from anywhere (for autogenerated connections)TimeBetweenEpochs
: Time between epochs (synchronization used for replication)TimeBetweenEpochsTimeout
: Timeout for time between epochs. Exceeding will cause node shutdown.TimeBetweenGlobalCheckpoints
: Time between group commits of transactions to diskTimeBetweenGlobalCheckpointsTimeout
: Minimum timeout for group commit of transactions to diskTimeBetweenInactiveTransactionAbortCheck
: Time between checks for inactive transactionsTimeBetweenLocalCheckpoints
: Time between taking snapshots of the database (expressed in base-2 logarithm of bytes)TimeBetweenWatchDogCheck
: Time between execution checks inside a data nodeTimeBetweenWatchDogCheckInitial
: Time between execution checks inside a data node (early start phases when memory is allocated)TotalSendBufferMemory
: Total memory to use for all transporter send buffers.TransactionBufferMemory
: Dynamic buffer space (in bytes) for key and attribute data allocated for each data nodeTransactionDeadlockDetectionTimeout
: Time transaction can spend executing within a data node. This is the time that the transaction coordinator waits for each data node participating in the transaction to execute a request. If the data node takes more than this amount of time, the transaction is aborted.TransactionInactiveTimeout
: Milliseconds that the application waits before executing another part of the transaction. This is the time the transaction coordinator waits for the application to execute or send another part (query, statement) of the transaction. If the application takes too much time, then the transaction is aborted. Timeout = 0 means that the application never times out.TwoPassInitialNodeRestartCopy
: Copy data in 2 passes during initial node restart, which enables multithreaded building of ordered indexes for such restarts.UndoDataBuffer
: Number of bytes on each data node allocated for writing data undo logsUndoIndexBuffer
: Number of bytes on each data node allocated for writing index undo logsUseShm
: Use shared memory connections between this data node and API node also running on this host
The following parameters are specific to ndbmtd:
MaxNoOfExecutionThreads
: For ndbmtd only, specify maximum number of execution threadsNoOfFragmentLogParts
: Number of redo log file groups belonging to this data node; value must be an even multiple of 4.ThreadConfig
: Used for configuration of multithreaded data nodes (ndbmtd). Default is an empty string; see documentation for syntax and other information.
Deutsche Übersetzung
Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.
Vielen Dank im Voraus.
Dokument erstellt 26/06/2006, zuletzt geändert 26/10/2018
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/mysql-rf-mysql-cluster-params-ndbd.html
Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.
Referenzen
Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.