javax.xml.soap

Class AttachmentPart

Inhaltsverzeichnis

  • public abstract class AttachmentPart
extends Object
    A single attachment to a SOAPMessage object. A SOAPMessage object may contain zero, one, or many AttachmentPart objects. Each AttachmentPart object consists of two parts, application-specific content and associated MIME headers. The MIME headers consists of name/value pairs that can be used to identify and describe the content.

    An AttachmentPart object must conform to certain standards.

    1. It must conform to MIME [RFC2045] standards
    2. It MUST contain content
    3. The header portion MUST include the following header:
      • Content-Type
        This header identifies the type of data in the content of an AttachmentPart object and MUST conform to [RFC2045]. The following is an example of a Content-Type header: 
               Content-Type:  application/xml
        The following line of code, in which ap is an AttachmentPart object, sets the header shown in the previous example. 
               ap.setMimeHeader("Content-Type", "application/xml");

    There are no restrictions on the content portion of an AttachmentPart object. The content may be anything from a simple plain text object to a complex XML document or image file.

    An AttachmentPart object is created with the method SOAPMessage.createAttachmentPart. After setting its MIME headers, the AttachmentPart object is added to the message that created it with the method SOAPMessage.addAttachmentPart.

    The following code fragment, in which m is a SOAPMessage object and contentStringl is a String, creates an instance of AttachmentPart, sets the AttachmentPart object with some content and header information, and adds the AttachmentPart object to the SOAPMessage object. 

         AttachmentPart ap1 = m.createAttachmentPart();
     ap1.setContent(contentString1, "text/plain");
     m.addAttachmentPart(ap1);

    The following code fragment creates and adds a second AttachmentPart instance to the same message. jpegData is a binary byte buffer representing the jpeg file. 

         AttachmentPart ap2 = m.createAttachmentPart();
     byte[] jpegData =  ...;
     ap2.setContent(new ByteArrayInputStream(jpegData), "image/jpeg");
     m.addAttachmentPart(ap2);

    The getContent method retrieves the contents and header from an AttachmentPart object. Depending on the DataContentHandler objects present, the returned Object can either be a typed Java object corresponding to the MIME type or an InputStream object that contains the content as bytes. 

         String content1 = ap1.getContent();
     java.io.InputStream content2 = ap2.getContent();
    The method clearContent removes all the content from an AttachmentPart object but does not affect its header information. 
         ap1.clearContent();

    • Method Summary

      Methods 
      Modifier and Type Method and Description
      abstract void addMimeHeader(String name, String value)
      Adds a MIME header with the specified name and value to this AttachmentPart object.
      abstract void clearContent()
      Clears out the content of this AttachmentPart object.
      abstract Iterator getAllMimeHeaders()
      Retrieves all the headers for this AttachmentPart object as an iterator over the MimeHeader objects.
      abstract InputStream getBase64Content()
      Returns an InputStream which can be used to obtain the content of AttachmentPart as Base64 encoded character data, this method would base64 encode the raw bytes of the attachment and return.
      abstract Object getContent()
      Gets the content of this AttachmentPart object as a Java object.
      String getContentId()
      Gets the value of the MIME header whose name is "Content-ID".
      String getContentLocation()
      Gets the value of the MIME header whose name is "Content-Location".
      String getContentType()
      Gets the value of the MIME header whose name is "Content-Type".
      abstract DataHandler getDataHandler()
      Gets the DataHandler object for this AttachmentPart object.
      abstract Iterator getMatchingMimeHeaders(String[] names)
      Retrieves all MimeHeader objects that match a name in the given array.
      abstract String[] getMimeHeader(String name)
      Gets all the values of the header identified by the given String.
      abstract Iterator getNonMatchingMimeHeaders(String[] names)
      Retrieves all MimeHeader objects whose name does not match a name in the given array.
      abstract InputStream getRawContent()
      Gets the content of this AttachmentPart object as an InputStream as if a call had been made to getContent and no DataContentHandler had been registered for the content-type of this AttachmentPart.
      abstract byte[] getRawContentBytes()
      Gets the content of this AttachmentPart object as a byte[] array as if a call had been made to getContent and no DataContentHandler had been registered for the content-type of this AttachmentPart.
      abstract int getSize()
      Returns the number of bytes in this AttachmentPart object.
      abstract void removeAllMimeHeaders()
      Removes all the MIME header entries.
      abstract void removeMimeHeader(String header)
      Removes all MIME headers that match the given name.
      abstract void setBase64Content(InputStream content, String contentType)
      Sets the content of this attachment part from the Base64 source InputStream and sets the value of the Content-Type header to the value contained in contentType, This method would first decode the base64 input and write the resulting raw bytes to the attachment.
      abstract void setContent(Object object, String contentType)
      Sets the content of this attachment part to that of the given Object and sets the value of the Content-Type header to the given type.
      void setContentId(String contentId)
      Sets the MIME header whose name is "Content-ID" with the given value.
      void setContentLocation(String contentLocation)
      Sets the MIME header whose name is "Content-Location" with the given value.
      void setContentType(String contentType)
      Sets the MIME header whose name is "Content-Type" with the given value.
      abstract void setDataHandler(DataHandler dataHandler)
      Sets the given DataHandler object as the data handler for this AttachmentPart object.
      abstract void setMimeHeader(String name, String value)
      Changes the first header entry that matches the given name to the given value, adding a new header if no existing header matches.
      abstract void setRawContent(InputStream content, String contentType)
      Sets the content of this attachment part to that contained by the InputStream content and sets the value of the Content-Type header to the value contained in contentType.
      abstract void setRawContentBytes(byte[] content, int offset, int len, String contentType)
      Sets the content of this attachment part to that contained by the byte[] array content and sets the value of the Content-Type header to the value contained in contentType.

      Erste Seite von API Java Inhaltsverzeichnis Haut

    • Constructor Detail

      • AttachmentPart

        public AttachmentPart()

    • Method Detail

      • getSize

        public abstract int getSize()
                     throws SOAPException
        Returns the number of bytes in this AttachmentPart object.
        Returns:
        the size of this AttachmentPart object in bytes or -1 if the size cannot be determined
        Throws:
        SOAPException - if the content of this attachment is corrupted of if there was an exception while trying to determine the size.

      • clearContent

        public abstract void clearContent()
        Clears out the content of this AttachmentPart object. The MIME header portion is left untouched.

      • getContent

        public abstract Object getContent()
                           throws SOAPException
        Gets the content of this AttachmentPart object as a Java object. The type of the returned Java object depends on (1) the DataContentHandler object that is used to interpret the bytes and (2) the Content-Type given in the header.

        For the MIME content types "text/plain", "text/html" and "text/xml", the DataContentHandler object does the conversions to and from the Java types corresponding to the MIME types. For other MIME types,the DataContentHandler object can return an InputStream object that contains the content data as raw bytes.

        A SAAJ-compliant implementation must, as a minimum, return a java.lang.String object corresponding to any content stream with a Content-Type value of text/plain, a javax.xml.transform.stream.StreamSource object corresponding to a content stream with a Content-Type value of text/xml, a java.awt.Image object corresponding to a content stream with a Content-Type value of image/gif or image/jpeg. For those content types that an installed DataContentHandler object does not understand, the DataContentHandler object is required to return a java.io.InputStream object with the raw bytes.

        Returns:
        a Java object with the content of this AttachmentPart object
        Throws:
        SOAPException - if there is no content set into this AttachmentPart object or if there was a data transformation error

      • getRawContent

        public abstract InputStream getRawContent()
                                   throws SOAPException
        Gets the content of this AttachmentPart object as an InputStream as if a call had been made to getContent and no DataContentHandler had been registered for the content-type of this AttachmentPart.

        Note that reading from the returned InputStream would result in consuming the data in the stream. It is the responsibility of the caller to reset the InputStream appropriately before calling a Subsequent API. If a copy of the raw attachment content is required then the getRawContentBytes() API should be used instead.

        Returns:
        an InputStream from which the raw data contained by the AttachmentPart can be accessed.
        Throws:
        SOAPException - if there is no content set into this AttachmentPart object or if there was a data transformation error.
        Since:
        SAAJ 1.3
        See Also:
        getRawContentBytes()

      • getRawContentBytes

        public abstract byte[] getRawContentBytes()
                                   throws SOAPException
        Gets the content of this AttachmentPart object as a byte[] array as if a call had been made to getContent and no DataContentHandler had been registered for the content-type of this AttachmentPart.
        Returns:
        a byte[] array containing the raw data of the AttachmentPart.
        Throws:
        SOAPException - if there is no content set into this AttachmentPart object or if there was a data transformation error.
        Since:
        SAAJ 1.3

      • getBase64Content

        public abstract InputStream getBase64Content()
                                      throws SOAPException
        Returns an InputStream which can be used to obtain the content of AttachmentPart as Base64 encoded character data, this method would base64 encode the raw bytes of the attachment and return.
        Returns:
        an InputStream from which the Base64 encoded AttachmentPart can be read.
        Throws:
        SOAPException - if there is no content set into this AttachmentPart object or if there was a data transformation error.
        Since:
        SAAJ 1.3

      • setContent

        public abstract void setContent(Object object,
              String contentType)
        Sets the content of this attachment part to that of the given Object and sets the value of the Content-Type header to the given type. The type of the Object should correspond to the value given for the Content-Type. This depends on the particular set of DataContentHandler objects in use.
        Parameters:
        object - the Java object that makes up the content for this attachment part
        contentType - the MIME string that specifies the type of the content
        Throws:
        IllegalArgumentException - may be thrown if the contentType does not match the type of the content object, or if there was no DataContentHandler object for this content object
        See Also:
        getContent()

      • setRawContent

        public abstract void setRawContent(InputStream content,
                 String contentType)
                            throws SOAPException
        Sets the content of this attachment part to that contained by the InputStream content and sets the value of the Content-Type header to the value contained in contentType.

        A subsequent call to getSize() may not be an exact measure of the content size.

        Parameters:
        content - the raw data to add to the attachment part
        contentType - the value to set into the Content-Type header
        Throws:
        SOAPException - if an there is an error in setting the content
        NullPointerException - if content is null
        Since:
        SAAJ 1.3

      • setRawContentBytes

        public abstract void setRawContentBytes(byte[] content,
                      int offset,
                      int len,
                      String contentType)
                                 throws SOAPException
        Sets the content of this attachment part to that contained by the byte[] array content and sets the value of the Content-Type header to the value contained in contentType.
        Parameters:
        content - the raw data to add to the attachment part
        contentType - the value to set into the Content-Type header
        offset - the offset in the byte array of the content
        len - the number of bytes that form the content
        Throws:
        SOAPException - if an there is an error in setting the content or content is null
        Since:
        SAAJ 1.3

      • setBase64Content

        public abstract void setBase64Content(InputStream content,
                    String contentType)
                               throws SOAPException
        Sets the content of this attachment part from the Base64 source InputStream and sets the value of the Content-Type header to the value contained in contentType, This method would first decode the base64 input and write the resulting raw bytes to the attachment.

        A subsequent call to getSize() may not be an exact measure of the content size.

        Parameters:
        content - the base64 encoded data to add to the attachment part
        contentType - the value to set into the Content-Type header
        Throws:
        SOAPException - if an there is an error in setting the content
        NullPointerException - if content is null
        Since:
        SAAJ 1.3

      • getDataHandler

        public abstract DataHandler getDataHandler()
                                    throws SOAPException
        Gets the DataHandler object for this AttachmentPart object.
        Returns:
        the DataHandler object associated with this AttachmentPart object
        Throws:
        SOAPException - if there is no data in this AttachmentPart object

      • setDataHandler

        public abstract void setDataHandler(DataHandler dataHandler)
        Sets the given DataHandler object as the data handler for this AttachmentPart object. Typically, on an incoming message, the data handler is automatically set. When a message is being created and populated with content, the setDataHandler method can be used to get data from various data sources into the message.
        Parameters:
        dataHandler - the DataHandler object to be set
        Throws:
        IllegalArgumentException - if there was a problem with the specified DataHandler object

      • getContentId

        public String getContentId()
        Gets the value of the MIME header whose name is "Content-ID".
        Returns:
        a String giving the value of the "Content-ID" header or null if there is none
        See Also:
        setContentId(java.lang.String)

      • getContentLocation

        public String getContentLocation()
        Gets the value of the MIME header whose name is "Content-Location".
        Returns:
        a String giving the value of the "Content-Location" header or null if there is none

      • getContentType

        public String getContentType()
        Gets the value of the MIME header whose name is "Content-Type".
        Returns:
        a String giving the value of the "Content-Type" header or null if there is none

      • setContentId

        public void setContentId(String contentId)
        Sets the MIME header whose name is "Content-ID" with the given value.
        Parameters:
        contentId - a String giving the value of the "Content-ID" header
        Throws:
        IllegalArgumentException - if there was a problem with the specified contentId value
        See Also:
        getContentId()

      • setContentLocation

        public void setContentLocation(String contentLocation)
        Sets the MIME header whose name is "Content-Location" with the given value.
        Parameters:
        contentLocation - a String giving the value of the "Content-Location" header
        Throws:
        IllegalArgumentException - if there was a problem with the specified content location

      • setContentType

        public void setContentType(String contentType)
        Sets the MIME header whose name is "Content-Type" with the given value.
        Parameters:
        contentType - a String giving the value of the "Content-Type" header
        Throws:
        IllegalArgumentException - if there was a problem with the specified content type

      • removeMimeHeader

        public abstract void removeMimeHeader(String header)
        Removes all MIME headers that match the given name.
        Parameters:
        header - the string name of the MIME header/s to be removed

      • removeAllMimeHeaders

        public abstract void removeAllMimeHeaders()
        Removes all the MIME header entries.

      • getMimeHeader

        public abstract String[] getMimeHeader(String name)
        Gets all the values of the header identified by the given String.
        Parameters:
        name - the name of the header; example: "Content-Type"
        Returns:
        a String array giving the value for the specified header
        See Also:
        setMimeHeader(java.lang.String, java.lang.String)

      • setMimeHeader

        public abstract void setMimeHeader(String name,
                 String value)
        Changes the first header entry that matches the given name to the given value, adding a new header if no existing header matches. This method also removes all matching headers but the first.

        Note that RFC822 headers can only contain US-ASCII characters.

        Parameters:
        name - a String giving the name of the header for which to search
        value - a String giving the value to be set for the header whose name matches the given name
        Throws:
        IllegalArgumentException - if there was a problem with the specified mime header name or value

      • addMimeHeader

        public abstract void addMimeHeader(String name,
                 String value)
        Adds a MIME header with the specified name and value to this AttachmentPart object.

        Note that RFC822 headers can contain only US-ASCII characters.

        Parameters:
        name - a String giving the name of the header to be added
        value - a String giving the value of the header to be added
        Throws:
        IllegalArgumentException - if there was a problem with the specified mime header name or value

      • getAllMimeHeaders

        public abstract Iterator getAllMimeHeaders()
        Retrieves all the headers for this AttachmentPart object as an iterator over the MimeHeader objects.
        Returns:
        an Iterator object with all of the Mime headers for this AttachmentPart object

      • getMatchingMimeHeaders

        public abstract Iterator getMatchingMimeHeaders(String[] names)
        Retrieves all MimeHeader objects that match a name in the given array.
        Parameters:
        names - a String array with the name(s) of the MIME headers to be returned
        Returns:
        all of the MIME headers that match one of the names in the given array as an Iterator object

      • getNonMatchingMimeHeaders

        public abstract Iterator getNonMatchingMimeHeaders(String[] names)
        Retrieves all MimeHeader objects whose name does not match a name in the given array.
        Parameters:
        names - a String array with the name(s) of the MIME headers not to be returned
        Returns:
        all of the MIME headers in this AttachmentPart object except those that match one of the names in the given array. The nonmatching MIME headers are returned as an Iterator object.

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/xml/soap/attachmentpart.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut