javax.swing

Class LookAndFeel

  • Direct Known Subclasses:
    BasicLookAndFeel, MultiLookAndFeel

    public abstract class LookAndFeel
    extends Object
    LookAndFeel, as the name implies, encapsulates a look and feel. Beyond installing a look and feel most developers never need to interact directly with LookAndFeel. In general only developers creating a custom look and feel need to concern themselves with this class.

    Swing is built upon the foundation that each JComponent subclass has an implementation of a specific ComponentUI subclass. The ComponentUI is often referred to as "the ui", "component ui", or "look and feel delegate". The ComponentUI subclass is responsible for providing the look and feel specific functionality of the component. For example, JTree requires an implementation of the ComponentUI subclass TreeUI. The implementation of the specific ComponentUI subclass is provided by the LookAndFeel. Each JComponent subclass identifies the ComponentUI subclass it requires by way of the JComponent method getUIClassID.

    Each LookAndFeel implementation must provide an implementation of the appropriate ComponentUI subclass by specifying a value for each of Swing's ui class ids in the UIDefaults object returned from getDefaults. For example, BasicLookAndFeel uses BasicTreeUI as the concrete implementation for TreeUI. This is accomplished by BasicLookAndFeel providing the key-value pair "TreeUI"-"javax.swing.plaf.basic.BasicTreeUI", in the UIDefaults returned from getDefaults. Refer to UIDefaults.getUI(JComponent) for defails on how the implementation of the ComponentUI subclass is obtained.

    When a LookAndFeel is installed the UIManager does not check that an entry exists for all ui class ids. As such, random exceptions will occur if the current look and feel has not provided a value for a particular ui class id and an instance of the JComponent subclass is created.

    Recommendations for Look and Feels

    As noted in UIManager each LookAndFeel has the opportunity to provide a set of defaults that are layered in with developer and system defaults. Some of Swing's components require the look and feel to provide a specific set of defaults. These are documented in the classes that require the specific default.

    ComponentUIs and defaults

    All ComponentUIs typically need to set various properties on the JComponent the ComponentUI is providing the look and feel for. This is typically done when the ComponentUI is installed on the JComponent. Setting a property should only be done if the developer has not set the property. For non-primitive values it is recommended that the ComponentUI only change the property on the JComponent if the current value is null or implements UIResource. If the current value is null or implements UIResource it indicates the property has not been set by the developer, and the ui is free to change it. For example, BasicButtonUI.installDefaults only changes the font on the JButton if the return value from button.getFont() is null or implements UIResource. On the other hand if button.getFont() returned a non-null value that did not implement UIResource then BasicButtonUI.installDefaults would not change the JButton's font.

    For primitive values, such as opaque, the method installProperty should be invoked. installProperty only changes the correspoding property if the value has not been changed by the developer.

    ComponentUI implementations should use the various install methods provided by this class as they handle the necessary checking and install the property using the recommended guidelines.

    Exceptions

    All of the install methods provided by LookAndFeel need to access the defaults if the value of the property being changed is null or a UIResource. For example, installing the font does the following:
       JComponent c;
       Font font = c.getFont();
       if (font == null || (font instanceof UIResource)) {
           c.setFont(UIManager.getFont("fontKey"));
       }
     
    If the font is null or a UIResource, the defaults table is queried with the key fontKey. All of UIDefault's get methods throw a NullPointerException if passed in null. As such, unless otherwise noted each of the various install methods of LookAndFeel throw a NullPointerException if the current value is null or a UIResource and the supplied defaults key is null. In addition, unless otherwise specified all of the install methods throw a NullPointerException if a null component is passed in.
    • Constructor Detail

      • LookAndFeel

        public LookAndFeel()
    • Method Detail

      • installBorder

        public static void installBorder(JComponent c,
                         String defaultBorderName)
        Convenience method for setting a component's border property with a value from the defaults. The border is only set if the border is null or an instance of UIResource.
        Parameters:
        c - component to set the border on
        defaultBorderName - key specifying the border
        Throws:
        NullPointerException - as described in exceptions
      • uninstallBorder

        public static void uninstallBorder(JComponent c)
        Convenience method for uninstalling a border. If the border of the component is a UIResource, it is set to null.
        Parameters:
        c - component to uninstall the border on
        Throws:
        NullPointerException - if c is null
      • installProperty

        public static void installProperty(JComponent c,
                           String propertyName,
                           Object propertyValue)
        Convenience method for installing a property with the specified name and value on a component if that property has not already been set by the developer. This method is intended to be used by ui delegate instances that need to specify a default value for a property of primitive type (boolean, int, ..), but do not wish to override a value set by the client. Since primitive property values cannot be wrapped with the UIResource marker, this method uses private state to determine whether the property has been set by the client.
        Parameters:
        c - target component to set the property on
        propertyName - name of the property to set
        propertyValue - value of the property
        Throws:
        IllegalArgumentException - if the specified property is not one which can be set using this method
        ClassCastException - if the property value has not been set by the developer and the type does not match the property's type
        NullPointerException - if c is null, or the named property has not been set by the developer and propertyValue is null
        Since:
        1.5
      • makeKeyBindings

        public static JTextComponent.KeyBinding[] makeKeyBindings(Object[] keyBindingList)
        Convenience method for building an array of KeyBindings. While this method is not deprecated, developers should instead use ActionMap and InputMap for supplying key bindings.

        This method returns an array of KeyBindings, one for each alternating key-action pair in keyBindingList. A key can either be a String in the format specified by the KeyStroke.getKeyStroke method, or a KeyStroke. The action part of the pair is a String that corresponds to the name of the Action.

        The following example illustrates creating a KeyBinding array from six alternating key-action pairs:

          JTextComponent.KeyBinding[] multilineBindings = makeKeyBindings( new Object[] {
                  "UP", DefaultEditorKit.upAction,
                "DOWN", DefaultEditorKit.downAction,
             "PAGE_UP", DefaultEditorKit.pageUpAction,
           "PAGE_DOWN", DefaultEditorKit.pageDownAction,
               "ENTER", DefaultEditorKit.insertBreakAction,
                 "TAB", DefaultEditorKit.insertTabAction
          });
         
        If keyBindingList's length is odd, the last element is ignored.

        Supplying a null value for either the key or action part of the key-action pair results in creating a KeyBinding with the corresponding value null. As other parts of Swing's expect non-null values in a KeyBinding, you should avoid supplying null as either the key or action part of the key-action pair.

        Parameters:
        keyBindingList - an array of key-action pairs
        Returns:
        an array of KeyBindings
        Throws:
        NullPointerException - if keyBindingList is null
        ClassCastException - if the key part of the pair is not a KeyStroke or String, or the action part of the pair is not a String
        See Also:
        ActionMap, InputMap, KeyStroke.getKeyStroke(char)
      • loadKeyBindings

        public static void loadKeyBindings(InputMap retMap,
                           Object[] keys)
        Populates an InputMap with the specified bindings. The bindings are supplied as a list of alternating keystroke-action key pairs. The keystroke is either an instance of KeyStroke, or a String that identifies the KeyStroke for the binding. Refer to KeyStroke.getKeyStroke(String) for the specific format. The action key part of the pair is the key registered in the InputMap for the KeyStroke.

        The following illustrates loading an InputMap with two key-action pairs:

           LookAndFeel.loadKeyBindings(inputMap, new Object[] {
             "control X", "cut",
             "control V", "paste"
           });
         

        Supplying a null list of bindings (keys) does not change retMap in any way.

        Specifying a null action key results in removing the keystroke's entry from the InputMap. A null keystroke is ignored.

        Parameters:
        retMap - InputMap to add the key-action pairs to
        keys - bindings to add to retMap
        Throws:
        NullPointerException - if keys is non-null, not empty, and retMap is null
        Since:
        1.3
        See Also:
        KeyStroke.getKeyStroke(String), InputMap
      • makeIcon

        public static Object makeIcon(Class<?> baseClass,
                      String gifFile)
        Creates and returns a UIDefault.LazyValue that loads an image. The returned value is an implementation of UIDefaults.LazyValue. When createValue is invoked on the returned object, the image is loaded. If the image is non-null, it is then wrapped in an Icon that implements UIResource. The image is loaded using Class.getResourceAsStream(gifFile).

        This method does not check the arguments in any way. It is strongly recommended that non-null values are supplied else exceptions may occur when createValue is invoked on the returned object.

        Parameters:
        baseClass - Class used to load the resource
        gifFile - path to the image to load
        Returns:
        a UIDefaults.LazyValue; when resolved the LazyValue loads the specified image
        See Also:
        UIDefaults.LazyValue, Icon, Class.getResourceAsStream(String)
      • getLayoutStyle

        public LayoutStyle getLayoutStyle()
        Returns the LayoutStyle for this look and feel. This never returns null.

        You generally don't use the LayoutStyle from the look and feel, instead use the LayoutStyle method getInstance.

        Returns:
        the LayoutStyle for this look and feel
        Since:
        1.6
        See Also:
        LayoutStyle.getInstance()
      • provideErrorFeedback

        public void provideErrorFeedback(Component component)
        Invoked when the user attempts an invalid operation, such as pasting into an uneditable JTextField that has focus. The default implementation beeps. Subclasses that wish different behavior should override this and provide the additional feedback.
        Parameters:
        component - the Component the error occurred in, may be null indicating the error condition is not directly associated with a Component
        Since:
        1.4
      • getDesktopPropertyValue

        public static Object getDesktopPropertyValue(String systemPropertyName,
                                     Object fallbackValue)
        Returns the value of the specified system desktop property by invoking Toolkit.getDefaultToolkit().getDesktopProperty(). If the value of the specified property is null, fallbackValue is returned.
        Parameters:
        systemPropertyName - the name of the system desktop property being queried
        fallbackValue - the object to be returned as the value if the system value is null
        Returns:
        the current value of the desktop property
        Since:
        1.4
        See Also:
        Toolkit.getDesktopProperty(java.lang.String)
      • getDisabledIcon

        public Icon getDisabledIcon(JComponent component,
                           Icon icon)
        Returns an Icon with a disabled appearance. This method is used to generate a disabled Icon when one has not been specified. For example, if you create a JButton and only specify an Icon via setIcon this method will be called to generate the disabled Icon. If null is passed as icon this method returns null.

        Some look and feels might not render the disabled Icon, in which case they will ignore this.

        Parameters:
        component - JComponent that will display the Icon, may be null
        icon - Icon to generate the disabled icon from
        Returns:
        disabled Icon, or null if a suitable Icon can not be generated
        Since:
        1.5
      • getDisabledSelectedIcon

        public Icon getDisabledSelectedIcon(JComponent component,
                                   Icon icon)
        Returns an Icon for use by disabled components that are also selected. This method is used to generate an Icon for components that are in both the disabled and selected states but do not have a specific Icon for this state. For example, if you create a JButton and only specify an Icon via setIcon this method will be called to generate the disabled and selected Icon. If null is passed as icon this methods returns null.

        Some look and feels might not render the disabled and selected Icon, in which case they will ignore this.

        Parameters:
        component - JComponent that will display the Icon, may be null
        icon - Icon to generate disabled and selected icon from
        Returns:
        disabled and selected icon, or null if a suitable Icon can not be generated.
        Since:
        1.5
      • getName

        public abstract String getName()
        Return a short string that identifies this look and feel, e.g. "CDE/Motif". This string should be appropriate for a menu item. Distinct look and feels should have different names, e.g. a subclass of MotifLookAndFeel that changes the way a few components are rendered should be called "CDE/Motif My Way"; something that would be useful to a user trying to select a L&F from a list of names.
        Returns:
        short identifier for the look and feel
      • getID

        public abstract String getID()
        Return a string that identifies this look and feel. This string will be used by applications/services that want to recognize well known look and feel implementations. Presently the well known names are "Motif", "Windows", "Mac", "Metal". Note that a LookAndFeel derived from a well known superclass that doesn't make any fundamental changes to the look or feel shouldn't override this method.
        Returns:
        identifier for the look and feel
      • getDescription

        public abstract String getDescription()
        Return a one line description of this look and feel implementation, e.g. "The CDE/Motif Look and Feel". This string is intended for the user, e.g. in the title of a window or in a ToolTip message.
        Returns:
        short description for the look and feel
      • isNativeLookAndFeel

        public abstract boolean isNativeLookAndFeel()
        If the underlying platform has a "native" look and feel, and this is an implementation of it, return true. For example, when the underlying platform is Solaris running CDE a CDE/Motif look and feel implementation would return true.
        Returns:
        true if this look and feel represents the underlying platform look and feel
      • isSupportedLookAndFeel

        public abstract boolean isSupportedLookAndFeel()
        Return true if the underlying platform supports and or permits this look and feel. This method returns false if the look and feel depends on special resources or legal agreements that aren't defined for the current platform.
        Returns:
        true if this is a supported look and feel
        See Also:
        UIManager.setLookAndFeel(javax.swing.LookAndFeel)
      • initialize

        public void initialize()
        Initializes the look and feel. While this method is public, it should only be invoked by the UIManager when a look and feel is installed as the current look and feel. This method is invoked before the UIManager invokes getDefaults. This method is intended to perform any initialization for the look and feel. Subclasses should do any one-time setup they need here, rather than in a static initializer, because look and feel class objects may be loaded just to discover that isSupportedLookAndFeel() returns false.
        See Also:
        uninitialize(), UIManager.setLookAndFeel(javax.swing.LookAndFeel)
      • uninitialize

        public void uninitialize()
        Uninitializes the look and feel. While this method is public, it should only be invoked by the UIManager when the look and feel is uninstalled. For example, UIManager.setLookAndFeel invokes this when the look and feel is changed.

        Subclasses may choose to free up some resources here.

        See Also:
        initialize(), UIManager.setLookAndFeel(javax.swing.LookAndFeel)
      • toString

        public String toString()
        Returns a string that displays and identifies this object's properties.
        Overrides:
        toString in class Object
        Returns:
        a String representation of this object

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/swing/lookandfeel.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut