javax.swing

Class JEditorPane

Inhaltsverzeichnis
  • All Implemented Interfaces:
    ImageObserver, MenuContainer, Serializable, Accessible, Scrollable
    Direct Known Subclasses:
    JTextPane

    public class JEditorPane
extends JTextComponent
    A text component to edit various kinds of content. You can find how-to information and examples of using editor panes in Using Text Components, a section in The Java Tutorial.

    This component uses implementations of the EditorKit to accomplish its behavior. It effectively morphs into the proper kind of text editor for the kind of content it is given. The content type that editor is bound to at any given time is determined by the EditorKit currently installed. If the content is set to a new URL, its type is used to determine the EditorKit that should be used to load the content.

    By default, the following types of content are known:

    text/plain
    Plain text, which is the default the type given isn't recognized. The kit used in this case is an extension of DefaultEditorKit that produces a wrapped plain text view.
    text/html
    HTML text. The kit used in this case is the class javax.swing.text.html.HTMLEditorKit which provides HTML 3.2 support.
    text/rtf
    RTF text. The kit used in this case is the class javax.swing.text.rtf.RTFEditorKit which provides a limited support of the Rich Text Format.

    There are several ways to load content into this component.

    1. The setText method can be used to initialize the component from a string. In this case the current EditorKit will be used, and the content type will be expected to be of this type.
    2. The read method can be used to initialize the component from a Reader. Note that if the content type is HTML, relative references (e.g. for things like images) can't be resolved unless the <base> tag is used or the Base property on HTMLDocument is set. In this case the current EditorKit will be used, and the content type will be expected to be of this type.
    3. The setPage method can be used to initialize the component from a URL. In this case, the content type will be determined from the URL, and the registered EditorKit for that content type will be set.

    Some kinds of content may provide hyperlink support by generating hyperlink events. The HTML EditorKit will generate hyperlink events if the JEditorPane is not editable (JEditorPane.setEditable(false); has been called). If HTML frames are embedded in the document, the typical response would be to change a portion of the current document. The following code fragment is a possible hyperlink listener implementation, that treats HTML frame events specially, and simply displays any other activated hyperlinks. 

    
     class Hyperactive implements HyperlinkListener {
 
         public void hyperlinkUpdate(HyperlinkEvent e) {
             if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED) {
                 JEditorPane pane = (JEditorPane) e.getSource();
                 if (e instanceof HTMLFrameHyperlinkEvent) {
                     HTMLFrameHyperlinkEvent  evt = (HTMLFrameHyperlinkEvent)e;
                     HTMLDocument doc = (HTMLDocument)pane.getDocument();
                     doc.processHTMLFrameHyperlinkEvent(evt);
                 } else {
                     try {
                         pane.setPage(e.getURL());
                     } catch (Throwable t) {
                         t.printStackTrace();
                     }
                 }
             }
         }
     }

    For information on customizing how text/html is rendered please see W3C_LENGTH_UNITS and HONOR_DISPLAY_PROPERTIES

    Culturally dependent information in some documents is handled through a mechanism called character encoding. Character encoding is an unambiguous mapping of the members of a character set (letters, ideographs, digits, symbols, or control functions) to specific numeric code values. It represents the way the file is stored. Example character encodings are ISO-8859-1, ISO-8859-5, Shift-jis, Euc-jp, and UTF-8. When the file is passed to an user agent (JEditorPane) it is converted to the document character set (ISO-10646 aka Unicode).

    There are multiple ways to get a character set mapping to happen with JEditorPane.

    1. One way is to specify the character set as a parameter of the MIME type. This will be established by a call to the setContentType method. If the content is loaded by the setPage method the content type will have been set according to the specification of the URL. It the file is loaded directly, the content type would be expected to have been set prior to loading.
    2. Another way the character set can be specified is in the document itself. This requires reading the document prior to determining the character set that is desired. To handle this, it is expected that the EditorKit.read operation throw a ChangedCharSetException which will be caught. The read is then restarted with a new Reader that uses the character set specified in the ChangedCharSetException (which is an IOException).

    Newlines
    For a discussion on how newlines are handled, see DefaultEditorKit.

    Warning: Swing is not thread safe. For more information see Swing's Threading Policy.

    Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeansTM has been added to the java.beans package. Please see XMLEncoder.

    • Field Detail

      • W3C_LENGTH_UNITS

        public static final String W3C_LENGTH_UNITS
        Key for a client property used to indicate whether w3c compliant length units are used for html rendering.

        By default this is not enabled; to enable it set the client property with this name to Boolean.TRUE.

        Since:
        1.5
        See Also:
        Constant Field Values

      • HONOR_DISPLAY_PROPERTIES

        public static final String HONOR_DISPLAY_PROPERTIES
        Key for a client property used to indicate whether the default font and foreground color from the component are used if a font or foreground color is not specified in the styled text.

        The default varies based on the look and feel; to enable it set the client property with this name to Boolean.TRUE.

        Since:
        1.5
        See Also:
        Constant Field Values

    • Constructor Detail

      • JEditorPane

        public JEditorPane()
        Creates a new JEditorPane. The document model is set to null.

      • JEditorPane

        public JEditorPane(URL initialPage)
            throws IOException
        Creates a JEditorPane based on a specified URL for input.
        Parameters:
        initialPage - the URL
        Throws:
        IOException - if the URL is null or cannot be accessed

      • JEditorPane

        public JEditorPane(String url)
            throws IOException
        Creates a JEditorPane based on a string containing a URL specification.
        Parameters:
        url - the URL
        Throws:
        IOException - if the URL is null or cannot be accessed

      • JEditorPane

        public JEditorPane(String type,
           String text)
        Creates a JEditorPane that has been initialized to the given text. This is a convenience constructor that calls the setContentType and setText methods.
        Parameters:
        type - mime type of the given text
        text - the text to initialize with; may be null
        Throws:
        NullPointerException - if the type parameter is null

    • Method Detail

      • addHyperlinkListener

        public void addHyperlinkListener(HyperlinkListener listener)
        Adds a hyperlink listener for notification of any changes, for example when a link is selected and entered.
        Parameters:
        listener - the listener

      • removeHyperlinkListener

        public void removeHyperlinkListener(HyperlinkListener listener)
        Removes a hyperlink listener.
        Parameters:
        listener - the listener

      • getHyperlinkListeners

        public HyperlinkListener[] getHyperlinkListeners()
        Returns an array of all the HyperLinkListeners added to this JEditorPane with addHyperlinkListener().
        Returns:
        all of the HyperLinkListeners added or an empty array if no listeners have been added
        Since:
        1.4

      • fireHyperlinkUpdate

        public void fireHyperlinkUpdate(HyperlinkEvent e)
        Notifies all listeners that have registered interest for notification on this event type. This is normally called by the currently installed EditorKit if a content type that supports hyperlinks is currently active and there was activity with a link. The listener list is processed last to first.
        Parameters:
        e - the event
        See Also:
        EventListenerList

      • setPage

        public void setPage(URL page)
             throws IOException
        Sets the current URL being displayed. The content type of the pane is set, and if the editor kit for the pane is non-null, then a new default document is created and the URL is read into it. If the URL contains and reference location, the location will be scrolled to by calling the scrollToReference method. If the desired URL is the one currently being displayed, the document will not be reloaded. To force a document reload it is necessary to clear the stream description property of the document. The following code shows how this can be done: 
           Document doc = jEditorPane.getDocument();
   doc.putProperty(Document.StreamDescriptionProperty, null);
        If the desired URL is not the one currently being displayed, the getStream method is called to give subclasses control over the stream provided.

        This may load either synchronously or asynchronously depending upon the document returned by the EditorKit. If the Document is of type AbstractDocument and has a value returned by AbstractDocument.getAsynchronousLoadPriority that is greater than or equal to zero, the page will be loaded on a separate thread using that priority.

        If the document is loaded synchronously, it will be filled in with the stream prior to being installed into the editor with a call to setDocument, which is bound and will fire a property change event. If an IOException is thrown the partially loaded document will be discarded and neither the document or page property change events will be fired. If the document is successfully loaded and installed, a view will be built for it by the UI which will then be scrolled if necessary, and then the page property change event will be fired.

        If the document is loaded asynchronously, the document will be installed into the editor immediately using a call to setDocument which will fire a document property change event, then a thread will be created which will begin doing the actual loading. In this case, the page property change event will not be fired by the call to this method directly, but rather will be fired when the thread doing the loading has finished. It will also be fired on the event-dispatch thread. Since the calling thread can not throw an IOException in the event of failure on the other thread, the page property change event will be fired when the other thread is done whether the load was successful or not.

        Parameters:
        page - the URL of the page
        Throws:
        IOException - for a null or invalid page specification, or exception from the stream being read
        See Also:
        getPage()

      • getStream

        protected InputStream getStream(URL page)
                         throws IOException
        Fetches a stream for the given URL, which is about to be loaded by the setPage method. By default, this simply opens the URL and returns the stream. This can be reimplemented to do useful things like fetch the stream from a cache, monitor the progress of the stream, etc.

        This method is expected to have the the side effect of establishing the content type, and therefore setting the appropriate EditorKit to use for loading the stream.

        If this the stream was an http connection, redirects will be followed and the resulting URL will be set as the Document.StreamDescriptionProperty so that relative URL's can be properly resolved.

        Parameters:
        page - the URL of the page
        Throws:
        IOException

      • scrollToReference

        public void scrollToReference(String reference)
        Scrolls the view to the given reference location (that is, the value returned by the UL.getRef method for the URL being displayed). By default, this method only knows how to locate a reference in an HTMLDocument. The implementation calls the scrollRectToVisible method to accomplish the actual scrolling. If scrolling to a reference location is needed for document types other than HTML, this method should be reimplemented. This method will have no effect if the component is not visible.
        Parameters:
        reference - the named location to scroll to

      • getPage

        public URL getPage()
        Gets the current URL being displayed. If a URL was not specified in the creation of the document, this will return null, and relative URL's will not be resolved.
        Returns:
        the URL, or null if none

      • setPage

        public void setPage(String url)
             throws IOException
        Sets the current URL being displayed.
        Parameters:
        url - the URL for display
        Throws:
        IOException - for a null or invalid URL specification

      • createDefaultEditorKit

        protected EditorKit createDefaultEditorKit()
        Creates the default editor kit (PlainEditorKit) for when the component is first created.
        Returns:
        the editor kit

      • getEditorKit

        public EditorKit getEditorKit()
        Fetches the currently installed kit for handling content. createDefaultEditorKit is called to set up a default if necessary.
        Returns:
        the editor kit

      • getContentType

        public final String getContentType()
        Gets the type of content that this editor is currently set to deal with. This is defined to be the type associated with the currently installed EditorKit.
        Returns:
        the content type, null if no editor kit set

      • setContentType

        public final void setContentType(String type)
        Sets the type of content that this editor handles. This calls getEditorKitForContentType, and then setEditorKit if an editor kit can be successfully located. This is mostly convenience method that can be used as an alternative to calling setEditorKit directly.

        If there is a charset definition specified as a parameter of the content type specification, it will be used when loading input streams using the associated EditorKit. For example if the type is specified as text/html; charset=EUC-JP the content will be loaded using the EditorKit registered for text/html and the Reader provided to the EditorKit to load unicode into the document will use the EUC-JP charset for translating to unicode. If the type is not recognized, the content will be loaded using the EditorKit registered for plain text, text/plain.

        Parameters:
        type - the non-null mime type for the content editing support
        Throws:
        NullPointerException - if the type parameter is null
        See Also:
        getContentType()

      • setEditorKit

        public void setEditorKit(EditorKit kit)
        Sets the currently installed kit for handling content. This is the bound property that establishes the content type of the editor. Any old kit is first deinstalled, then if kit is non-null, the new kit is installed, and a default document created for it. A PropertyChange event ("editorKit") is always fired when setEditorKit is called.

        NOTE: This has the side effect of changing the model, because the EditorKit is the source of how a particular type of content is modeled. This method will cause setDocument to be called on behalf of the caller to ensure integrity of the internal state.

        Parameters:
        kit - the desired editor behavior
        See Also:
        getEditorKit()

      • getEditorKitForContentType

        public EditorKit getEditorKitForContentType(String type)
        Fetches the editor kit to use for the given type of content. This is called when a type is requested that doesn't match the currently installed type. If the component doesn't have an EditorKit registered for the given type, it will try to create an EditorKit from the default EditorKit registry. If that fails, a PlainEditorKit is used on the assumption that all text documents can be represented as plain text.

        This method can be reimplemented to use some other kind of type registry. This can be reimplemented to use the Java Activation Framework, for example.

        Parameters:
        type - the non-null content type
        Returns:
        the editor kit

      • setEditorKitForContentType

        public void setEditorKitForContentType(String type,
                              EditorKit k)
        Directly sets the editor kit to use for the given type. A look-and-feel implementation might use this in conjunction with createEditorKitForContentType to install handlers for content types with a look-and-feel bias.
        Parameters:
        type - the non-null content type
        k - the editor kit to be set

      • replaceSelection

        public void replaceSelection(String content)
        Replaces the currently selected content with new content represented by the given string. If there is no selection this amounts to an insert of the given text. If there is no replacement text (i.e. the content string is empty or null) this amounts to a removal of the current selection. The replacement text will have the attributes currently defined for input. If the component is not editable, beep and return.
        Overrides:
        replaceSelection in class JTextComponent
        Parameters:
        content - the content to replace the selection with. This value can be null

      • createEditorKitForContentType

        public static EditorKit createEditorKitForContentType(String type)
        Creates a handler for the given type from the default registry of editor kits. The registry is created if necessary. If the registered class has not yet been loaded, an attempt is made to dynamically load the prototype of the kit for the given type. If the type was registered with a ClassLoader, that ClassLoader will be used to load the prototype. If there was no registered ClassLoader, Class.forName will be used to load the prototype.

        Once a prototype EditorKit instance is successfully located, it is cloned and the clone is returned.

        Parameters:
        type - the content type
        Returns:
        the editor kit, or null if there is nothing registered for the given type

      • registerEditorKitForContentType

        public static void registerEditorKitForContentType(String type,
                                   String classname)
        Establishes the default bindings of type to classname. The class will be dynamically loaded later when actually needed, and can be safely changed before attempted uses to avoid loading unwanted classes. The prototype EditorKit will be loaded with Class.forName when registered with this method.
        Parameters:
        type - the non-null content type
        classname - the class to load later

      • registerEditorKitForContentType

        public static void registerEditorKitForContentType(String type,
                                   String classname,
                                   ClassLoader loader)
        Establishes the default bindings of type to classname. The class will be dynamically loaded later when actually needed using the given ClassLoader, and can be safely changed before attempted uses to avoid loading unwanted classes.
        Parameters:
        type - the non-null content type
        classname - the class to load later
        loader - the ClassLoader to use to load the name

      • getEditorKitClassNameForContentType

        public static String getEditorKitClassNameForContentType(String type)
        Returns the currently registered EditorKit class name for the type type.
        Parameters:
        type - the non-null content type
        Since:
        1.3

      • getPreferredSize

        public Dimension getPreferredSize()
        Returns the preferred size for the JEditorPane. The preferred size for JEditorPane is slightly altered from the preferred size of the superclass. If the size of the viewport has become smaller than the minimum size of the component, the scrollable definition for tracking width or height will turn to false. The default viewport layout will give the preferred size, and that is not desired in the case where the scrollable is tracking. In that case the normal preferred size is adjusted to the minimum size. This allows things like HTML tables to shrink down to their minimum size and then be laid out at their minimum size, refusing to shrink any further.
        Overrides:
        getPreferredSize in class JComponent
        Returns:
        a Dimension containing the preferred size
        See Also:
        JComponent.setPreferredSize(java.awt.Dimension), ComponentUI

      • setText

        public void setText(String t)
        Sets the text of this TextComponent to the specified content, which is expected to be in the format of the content type of this editor. For example, if the type is set to text/html the string should be specified in terms of HTML.

        This is implemented to remove the contents of the current document, and replace them by parsing the given string using the current EditorKit. This gives the semantics of the superclass by not changing out the model, while supporting the content type currently set on this component. The assumption is that the previous content is relatively small, and that the previous content doesn't have side effects. Both of those assumptions can be violated and cause undesirable results. To avoid this, create a new document, getEditorKit().createDefaultDocument(), and replace the existing Document with the new one. You are then assured the previous Document won't have any lingering state.

        1. Leaving the existing model in place means that the old view will be torn down, and a new view created, where replacing the document would avoid the tear down of the old view.
        2. Some formats (such as HTML) can install things into the document that can influence future contents. HTML can have style information embedded that would influence the next content installed unexpectedly.

        An alternative way to load this component with a string would be to create a StringReader and call the read method. In this case the model would be replaced after it was initialized with the contents of the string.

        Overrides:
        setText in class JTextComponent
        Parameters:
        t - the new text to be set; if null the old text will be deleted
        See Also:
        getText()

      • getText

        public String getText()
        Returns the text contained in this TextComponent in terms of the content type of this editor. If an exception is thrown while attempting to retrieve the text, null will be returned. This is implemented to call JTextComponent.write with a StringWriter.
        Overrides:
        getText in class JTextComponent
        Returns:
        the text
        See Also:
        setText(java.lang.String)

      • paramString

        protected String paramString()
        Returns a string representation of this JEditorPane. This method is intended to be used only for debugging purposes, and the content and format of the returned string may vary between implementations. The returned string may be empty but may not be null.
        Overrides:
        paramString in class JTextComponent
        Returns:
        a string representation of this JEditorPane

      • getAccessibleContext

        public AccessibleContext getAccessibleContext()
        Gets the AccessibleContext associated with this JEditorPane. For editor panes, the AccessibleContext takes the form of an AccessibleJEditorPane. A new AccessibleJEditorPane instance is created if necessary.
        Specified by:
        getAccessibleContext in interface Accessible
        Overrides:
        getAccessibleContext in class JTextComponent
        Returns:
        an AccessibleJEditorPane that serves as the AccessibleContext of this JEditorPane

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/swing/JEditorPane.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut