All Superinterfaces:

AutoCloseable, DataLine, Line
```
public interface Clip
extends DataLine
```
The Clip interface represents a special kind of data line whose audio data can be loaded prior to playback, instead of being streamed in real time.
Because the data is pre-loaded and has a known length, you can set a clip to start playing at any position in its audio data. You can also create a loop, so that when the clip is played it will cycle repeatedly. Loops are specified with a starting and ending sample frame, along with the number of times that the loop should be played.
Clips may be obtained from a Mixer that supports lines of this type. Data is loaded into a clip when it is opened.
Playback of an audio clip may be started and stopped using the start and stop methods. These methods do not reset the media position; start causes playback to continue from the position where playback was last stopped. To restart playback from the beginning of the clip's audio data, simply follow the invocation of stop with setFramePosition(0), which rewinds the media to the beginning of the clip.

Since:

1.3

Nested Class Summary
- Nested classes/interfaces inherited from interface javax.sound.sampled.DataLine DataLine.Info

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`LOOP_CONTINUOUSLY` A value indicating that looping should continue indefinitely rather than complete after a specific number of loops.

Erste Seite von API Java Inhaltsverzeichnis Haut

Method Summary

Methods
Modifier and Type	Method and Description
`int`	`getFrameLength()` Obtains the media length in sample frames.
`long`	`getMicrosecondLength()` Obtains the media duration in microseconds
`void`	`loop(int count)` Starts looping playback from the current position.
`void`	`open(AudioFormat format, byte[] data, int offset, int bufferSize)` Opens the clip, meaning that it should acquire any required system resources and become operational.
`void`	`open(AudioInputStream stream)` Opens the clip with the format and audio data present in the provided audio input stream.
`void`	`setFramePosition(int frames)` Sets the media position in sample frames.
`void`	`setLoopPoints(int start, int end)` Sets the first and last sample frames that will be played in the loop.
`void`	`setMicrosecondPosition(long microseconds)` Sets the media position in microseconds.

Erste Seite von API Java Inhaltsverzeichnis Haut

Methods inherited from interface javax.sound.sampled.DataLine available, drain, flush, getBufferSize, getFormat, getFramePosition, getLevel, getLongFramePosition, getMicrosecondPosition, isActive, isRunning, start, stop

Methods inherited from interface javax.sound.sampled.Line addLineListener, close, getControl, getControls, getLineInfo, isControlSupported, isOpen, open, removeLineListener

- Field Detail
  - LOOP_CONTINUOUSLY
    static final int LOOP_CONTINUOUSLY
    
    A value indicating that looping should continue indefinitely rather than complete after a specific number of loops.
    
    See Also:
    loop(int), Constant Field Values
- Method Detail
  - open
    void open(AudioFormat format, byte[] data, int offset, int bufferSize) throws LineUnavailableException
    
    Opens the clip, meaning that it should acquire any required system resources and become operational. The clip is opened with the format and audio data indicated. If this operation succeeds, the line is marked as open and an OPEN event is dispatched to the line's listeners.
    Invoking this method on a line which is already open is illegal and may result in an IllegalStateException.
    Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException.
    
    Parameters:
    format - the format of the supplied audio data
    data - a byte array containing audio data to load into the clip
    offset - the point at which to start copying, expressed in bytes from the beginning of the array
    bufferSize - the number of bytes of data to load into the clip from the array.
    
    Throws:
    
    LineUnavailableException - if the line cannot be opened due to resource restrictions
    
    IllegalArgumentException - if the buffer size does not represent an integral number of sample frames, or if format is not fully specified or invalid
    
    IllegalStateException - if the line is already open
    
    SecurityException - if the line cannot be opened due to security restrictions
    See Also:
    Line.close(), Line.isOpen(), LineListener
  - open
    void open(AudioInputStream stream) throws LineUnavailableException, IOException
    
    Opens the clip with the format and audio data present in the provided audio input stream. Opening a clip means that it should acquire any required system resources and become operational. If this operation input stream. If this operation succeeds, the line is marked open and an OPEN event is dispatched to the line's listeners.
    Invoking this method on a line which is already open is illegal and may result in an IllegalStateException.
    Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException.
    
    Parameters:
    stream - an audio input stream from which audio data will be read into the clip
    
    Throws:
    
    LineUnavailableException - if the line cannot be opened due to resource restrictions
    
    IOException - if an I/O exception occurs during reading of the stream
    
    IllegalArgumentException - if the stream's audio format is not fully specified or invalid
    
    IllegalStateException - if the line is already open
    
    SecurityException - if the line cannot be opened due to security restrictions
    See Also:
    Line.close(), Line.isOpen(), LineListener
  - getFrameLength
    int getFrameLength()
    
    Obtains the media length in sample frames.
    
    Returns:
    the media length, expressed in sample frames, or AudioSystem.NOT_SPECIFIED if the line is not open.
    See Also:
    AudioSystem.NOT_SPECIFIED
  - getMicrosecondLength
    long getMicrosecondLength()
    
    Obtains the media duration in microseconds
    
    Returns:
    the media duration, expressed in microseconds, or AudioSystem.NOT_SPECIFIED if the line is not open.
    See Also:
    AudioSystem.NOT_SPECIFIED
  - setFramePosition
    void setFramePosition(int frames)
    
    Sets the media position in sample frames. The position is zero-based; the first frame is frame number zero. When the clip begins playing the next time, it will start by playing the frame at this position.
    To obtain the current position in sample frames, use the getFramePosition method of DataLine.
    
    Parameters:
    frames - the desired new media position, expressed in sample frames
  - setMicrosecondPosition
    void setMicrosecondPosition(long microseconds)
    
    Sets the media position in microseconds. When the clip begins playing the next time, it will start at this position. The level of precision is not guaranteed. For example, an implementation might calculate the microsecond position from the current frame position and the audio sample frame rate. The precision in microseconds would then be limited to the number of microseconds per sample frame.
    To obtain the current position in microseconds, use the getMicrosecondPosition method of DataLine.
    
    Parameters:
    microseconds - the desired new media position, expressed in microseconds
  - setLoopPoints
    void setLoopPoints(int start, int end)
    
    Sets the first and last sample frames that will be played in the loop. The ending point must be greater than or equal to the starting point, and both must fall within the the size of the loaded media. A value of 0 for the starting point means the beginning of the loaded media. Similarly, a value of -1 for the ending point indicates the last frame of the media.
    
    Parameters:
    start - the loop's starting position, in sample frames (zero-based)
    end - the loop's ending position, in sample frames (zero-based), or -1 to indicate the final frame
    
    Throws:
    
    IllegalArgumentException - if the requested loop points cannot be set, usually because one or both falls outside the media's duration or because the ending point is before the starting point
  - loop
    void loop(int count)
    
    Starts looping playback from the current position. Playback will continue to the loop's end point, then loop back to the loop start point count times, and finally continue playback to the end of the clip.
    If the current position when this method is invoked is greater than the loop end point, playback simply continues to the end of the clip without looping.
    A count value of 0 indicates that any current looping should cease and playback should continue to the end of the clip. The behavior is undefined when this method is invoked with any other value during a loop operation.
    If playback is stopped during looping, the current loop status is cleared; the behavior of subsequent loop and start requests is not affected by an interrupted loop operation.
    
    Parameters:
    count - the number of times playback should loop back from the loop's end position to the loop's start position, or LOOP_CONTINUOUSLY to indicate that looping should continue until interrupted

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/sound/sampled/Clip.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut

Interface Clip

Referenzen