javax.sound.midi

Class MidiSystem

Inhaltsverzeichnis

  • public class MidiSystem
extends Object
    The MidiSystem class provides access to the installed MIDI system resources, including devices such as synthesizers, sequencers, and MIDI input and output ports. A typical simple MIDI application might begin by invoking one or more MidiSystem methods to learn what devices are installed and to obtain the ones needed in that application.

    The class also has methods for reading files, streams, and URLs that contain standard MIDI file data or soundbanks. You can query the MidiSystem for the format of a specified MIDI file.

    You cannot instantiate a MidiSystem; all the methods are static.

    Properties can be used to specify default MIDI devices. Both system properties and a properties file are considered. The properties file is "lib/sound.properties" in the JRE directory. If a property exists both as a system property and in the properties file, the system property takes precedence. If none is specified, a suitable default is chosen among the available devices. The syntax of the properties file is specified in Properties.load. The following table lists the available property keys and which methods consider them:

    Property Key Interface Affected Method
    javax.sound.midi.Receiver Receiver getReceiver()
    javax.sound.midi.Sequencer Sequencer getSequencer()
    javax.sound.midi.Synthesizer Synthesizer getSynthesizer()
    javax.sound.midi.Transmitter Transmitter getTransmitter()

    Erste Seite von API Java Inhaltsverzeichnis Haut

    The property value consists of the provider class name and the device name, separated by the hash mark ("#"). The provider class name is the fully-qualified name of a concrete MIDI device provider class. The device name is matched against the String returned by the getName method of MidiDevice.Info. Either the class name, or the device name may be omitted. If only the class name is specified, the trailing hash mark is optional.

    If the provider class is specified, and it can be successully retrieved from the installed providers, the list of MidiDevice.Info objects is retrieved from the provider. Otherwise, or when these devices do not provide a subsequent match, the list is retrieved from getMidiDeviceInfo() to contain all available MidiDevice.Info objects.

    If a device name is specified, the resulting list of MidiDevice.Info objects is searched: the first one with a matching name, and whose MidiDevice implements the respective interface, will be returned. If no matching MidiDevice.Info object is found, or the device name is not specified, the first suitable device from the resulting list will be returned. For Sequencer and Synthesizer, a device is suitable if it implements the respective interface; whereas for Receiver and Transmitter, a device is suitable if it implements neither Sequencer nor Synthesizer and provides at least one Receiver or Transmitter, respectively. For example, the property javax.sound.midi.Receiver with a value "com.sun.media.sound.MidiProvider#SunMIDI1" will have the following consequences when getReceiver is called: if the class com.sun.media.sound.MidiProvider exists in the list of installed MIDI device providers, the first Receiver device with name "SunMIDI1" will be returned. If it cannot be found, the first Receiver from that provider will be returned, regardless of name. If there is none, the first Receiver with name "SunMIDI1" in the list of all devices (as returned by getMidiDeviceInfo) will be returned, or, if not found, the first Receiver that can be found in the list of all devices is returned. If that fails, too, a MidiUnavailableException is thrown.

    • Method Detail

      • getMidiDeviceInfo

        public static MidiDevice.Info[] getMidiDeviceInfo()
        Obtains an array of information objects representing the set of all MIDI devices available on the system. A returned information object can then be used to obtain the corresponding device object, by invoking getMidiDevice.
        Returns:
        an array of MidiDevice.Info objects, one for each installed MIDI device. If no such devices are installed, an array of length 0 is returned.

      • getReceiver

        public static Receiver getReceiver()
                            throws MidiUnavailableException
        Obtains a MIDI receiver from an external MIDI port or other default device. The returned receiver always implements the MidiDeviceReceiver interface.

        If the system property javax.sound.midi.Receiver is defined or it is defined in the file "sound.properties", it is used to identify the device that provides the default receiver. For details, refer to the class description. If a suitable MIDI port is not available, the Receiver is retrieved from an installed synthesizer.

        If a native receiver provided by the default device does not implement the MidiDeviceReceiver interface, it will be wrapped in a wrapper class that implements the MidiDeviceReceiver interface. The corresponding Receiver method calls will be forwarded to the native receiver.

        If this method returns successfully, the MidiDevice the Receiver belongs to is opened implicitly, if it is not already open. It is possible to close an implicitly opened device by calling close on the returned Receiver. All open Receiver instances have to be closed in order to release system resources hold by the MidiDevice. For a detailed description of open/close behaviour see the class description of MidiDevice.

        Returns:
        the default MIDI receiver
        Throws:
        MidiUnavailableException - if the default receiver is not available due to resource restrictions, or no device providing receivers is installed in the system

      • getTransmitter

        public static Transmitter getTransmitter()
                                  throws MidiUnavailableException
        Obtains a MIDI transmitter from an external MIDI port or other default source. The returned transmitter always implements the MidiDeviceTransmitter interface.

        If the system property javax.sound.midi.Transmitter is defined or it is defined in the file "sound.properties", it is used to identify the device that provides the default transmitter. For details, refer to the class description.

        If a native transmitter provided by the default device does not implement the MidiDeviceTransmitter interface, it will be wrapped in a wrapper class that implements the MidiDeviceTransmitter interface. The corresponding Transmitter method calls will be forwarded to the native transmitter.

        If this method returns successfully, the MidiDevice the Transmitter belongs to is opened implicitly, if it is not already open. It is possible to close an implicitly opened device by calling close on the returned Transmitter. All open Transmitter instances have to be closed in order to release system resources hold by the MidiDevice. For a detailed description of open/close behaviour see the class description of MidiDevice.

        Returns:
        the default MIDI transmitter
        Throws:
        MidiUnavailableException - if the default transmitter is not available due to resource restrictions, or no device providing transmitters is installed in the system

      • getSynthesizer

        public static Synthesizer getSynthesizer()
                                  throws MidiUnavailableException
        Obtains the default synthesizer.

        If the system property javax.sound.midi.Synthesizer is defined or it is defined in the file "sound.properties", it is used to identify the default synthesizer. For details, refer to the class description.

        Returns:
        the default synthesizer
        Throws:
        MidiUnavailableException - if the synthesizer is not available due to resource restrictions, or no synthesizer is installed in the system

      • getSequencer

        public static Sequencer getSequencer()
                              throws MidiUnavailableException
        Obtains the default Sequencer, connected to a default device. The returned Sequencer instance is connected to the default Synthesizer, as returned by getSynthesizer(). If there is no Synthesizer available, or the default Synthesizer cannot be opened, the sequencer is connected to the default Receiver, as returned by getReceiver(). The connection is made by retrieving a Transmitter instance from the Sequencer and setting its Receiver. Closing and re-opening the sequencer will restore the connection to the default device.

        This method is equivalent to calling getSequencer(true).

        If the system property javax.sound.midi.Sequencer is defined or it is defined in the file "sound.properties", it is used to identify the default sequencer. For details, refer to the class description.

        Returns:
        the default sequencer, connected to a default Receiver
        Throws:
        MidiUnavailableException - if the sequencer is not available due to resource restrictions, or there is no Receiver available by any installed MidiDevice, or no sequencer is installed in the system.
        See Also:
        getSequencer(boolean), getSynthesizer(), getReceiver()

      • getSequencer

        public static Sequencer getSequencer(boolean connected)
                              throws MidiUnavailableException
        Obtains the default Sequencer, optionally connected to a default device.

        If connected is true, the returned Sequencer instance is connected to the default Synthesizer, as returned by getSynthesizer(). If there is no Synthesizer available, or the default Synthesizer cannot be opened, the sequencer is connected to the default Receiver, as returned by getReceiver(). The connection is made by retrieving a Transmitter instance from the Sequencer and setting its Receiver. Closing and re-opening the sequencer will restore the connection to the default device.

        If connected is false, the returned Sequencer instance is not connected, it has no open Transmitters. In order to play the sequencer on a MIDI device, or a Synthesizer, it is necessary to get a Transmitter and set its Receiver.

        If the system property javax.sound.midi.Sequencer is defined or it is defined in the file "sound.properties", it is used to identify the default sequencer. For details, refer to the class description.

        Returns:
        the default sequencer
        Throws:
        MidiUnavailableException - if the sequencer is not available due to resource restrictions, or no sequencer is installed in the system, or if connected is true, and there is no Receiver available by any installed MidiDevice
        Since:
        1.5
        See Also:
        getSynthesizer(), getReceiver()

      • getSoundbank

        public static Soundbank getSoundbank(InputStream stream)
                              throws InvalidMidiDataException,
                                     IOException
        Constructs a MIDI sound bank by reading it from the specified stream. The stream must point to a valid MIDI soundbank file. In general, MIDI soundbank providers may need to read some data from the stream before determining whether they support it. These parsers must be able to mark the stream, read enough data to determine whether they support the stream, and, if not, reset the stream's read pointer to its original position. If the input stream does not support this, this method may fail with an IOException.
        Parameters:
        stream - the source of the sound bank data.
        Returns:
        the sound bank
        Throws:
        InvalidMidiDataException - if the stream does not point to valid MIDI soundbank data recognized by the system
        IOException - if an I/O error occurred when loading the soundbank
        See Also:
        InputStream.markSupported(), InputStream.mark(int)

      • getSoundbank

        public static Soundbank getSoundbank(URL url)
                              throws InvalidMidiDataException,
                                     IOException
        Constructs a Soundbank by reading it from the specified URL. The URL must point to a valid MIDI soundbank file.
        Parameters:
        url - the source of the sound bank data
        Returns:
        the sound bank
        Throws:
        InvalidMidiDataException - if the URL does not point to valid MIDI soundbank data recognized by the system
        IOException - if an I/O error occurred when loading the soundbank

      • getSoundbank

        public static Soundbank getSoundbank(File file)
                              throws InvalidMidiDataException,
                                     IOException
        Constructs a Soundbank by reading it from the specified File. The File must point to a valid MIDI soundbank file.
        Parameters:
        file - the source of the sound bank data
        Returns:
        the sound bank
        Throws:
        InvalidMidiDataException - if the File does not point to valid MIDI soundbank data recognized by the system
        IOException - if an I/O error occurred when loading the soundbank

      • getMidiFileFormat

        public static MidiFileFormat getMidiFileFormat(InputStream stream)
                                        throws InvalidMidiDataException,
                                               IOException
        Obtains the MIDI file format of the data in the specified input stream. The stream must point to valid MIDI file data for a file type recognized by the system.

        This method and/or the code it invokes may need to read some data from the stream to determine whether its data format is supported. The implementation may therefore need to mark the stream, read enough data to determine whether it is in a supported format, and reset the stream's read pointer to its original position. If the input stream does not permit this set of operations, this method may fail with an IOException.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while determining the file format.

        Parameters:
        stream - the input stream from which file format information should be extracted
        Returns:
        an MidiFileFormat object describing the MIDI file format
        Throws:
        InvalidMidiDataException - if the stream does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs while accessing the stream
        See Also:
        getMidiFileFormat(URL), getMidiFileFormat(File), InputStream.markSupported(), InputStream.mark(int)

      • getMidiFileFormat

        public static MidiFileFormat getMidiFileFormat(URL url)
                                        throws InvalidMidiDataException,
                                               IOException
        Obtains the MIDI file format of the data in the specified URL. The URL must point to valid MIDI file data for a file type recognized by the system.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while determining the file format.

        Parameters:
        url - the URL from which file format information should be extracted
        Returns:
        a MidiFileFormat object describing the MIDI file format
        Throws:
        InvalidMidiDataException - if the URL does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs while accessing the URL
        See Also:
        getMidiFileFormat(InputStream), getMidiFileFormat(File)

      • getMidiFileFormat

        public static MidiFileFormat getMidiFileFormat(File file)
                                        throws InvalidMidiDataException,
                                               IOException
        Obtains the MIDI file format of the specified File. The File must point to valid MIDI file data for a file type recognized by the system.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while determining the file format.

        Parameters:
        file - the File from which file format information should be extracted
        Returns:
        a MidiFileFormat object describing the MIDI file format
        Throws:
        InvalidMidiDataException - if the File does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs while accessing the file
        See Also:
        getMidiFileFormat(InputStream), getMidiFileFormat(URL)

      • getSequence

        public static Sequence getSequence(InputStream stream)
                            throws InvalidMidiDataException,
                                   IOException
        Obtains a MIDI sequence from the specified input stream. The stream must point to valid MIDI file data for a file type recognized by the system.

        This method and/or the code it invokes may need to read some data from the stream to determine whether its data format is supported. The implementation may therefore need to mark the stream, read enough data to determine whether it is in a supported format, and reset the stream's read pointer to its original position. If the input stream does not permit this set of operations, this method may fail with an IOException.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while constructing the Sequence object from the file data.

        Parameters:
        stream - the input stream from which the Sequence should be constructed
        Returns:
        a Sequence object based on the MIDI file data contained in the input stream
        Throws:
        InvalidMidiDataException - if the stream does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs while accessing the stream
        See Also:
        InputStream.markSupported(), InputStream.mark(int)

      • getSequence

        public static Sequence getSequence(URL url)
                            throws InvalidMidiDataException,
                                   IOException
        Obtains a MIDI sequence from the specified URL. The URL must point to valid MIDI file data for a file type recognized by the system.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while constructing the Sequence object from the file data.

        Parameters:
        url - the URL from which the Sequence should be constructed
        Returns:
        a Sequence object based on the MIDI file data pointed to by the URL
        Throws:
        InvalidMidiDataException - if the URL does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs while accessing the URL

      • getSequence

        public static Sequence getSequence(File file)
                            throws InvalidMidiDataException,
                                   IOException
        Obtains a MIDI sequence from the specified File. The File must point to valid MIDI file data for a file type recognized by the system.

        This operation can only succeed for files of a type which can be parsed by an installed file reader. It may fail with an InvalidMidiDataException even for valid files if no compatible file reader is installed. It will also fail with an InvalidMidiDataException if a compatible file reader is installed, but encounters errors while constructing the Sequence object from the file data.

        Parameters:
        file - the File from which the Sequence should be constructed
        Returns:
        a Sequence object based on the MIDI file data pointed to by the File
        Throws:
        InvalidMidiDataException - if the File does not point to valid MIDI file data recognized by the system
        IOException - if an I/O exception occurs

      • getMidiFileTypes

        public static int[] getMidiFileTypes()
        Obtains the set of MIDI file types for which file writing support is provided by the system.
        Returns:
        array of unique file types. If no file types are supported, an array of length 0 is returned.

      • isFileTypeSupported

        public static boolean isFileTypeSupported(int fileType)
        Indicates whether file writing support for the specified MIDI file type is provided by the system.
        Parameters:
        fileType - the file type for which write capabilities are queried
        Returns:
        true if the file type is supported, otherwise false

      • getMidiFileTypes

        public static int[] getMidiFileTypes(Sequence sequence)
        Obtains the set of MIDI file types that the system can write from the sequence specified.
        Parameters:
        sequence - the sequence for which MIDI file type support is queried
        Returns:
        the set of unique supported file types. If no file types are supported, returns an array of length 0.

      • isFileTypeSupported

        public static boolean isFileTypeSupported(int fileType,
                          Sequence sequence)
        Indicates whether a MIDI file of the file type specified can be written from the sequence indicated.
        Parameters:
        fileType - the file type for which write capabilities are queried
        sequence - the sequence for which file writing support is queried
        Returns:
        true if the file type is supported for this sequence, otherwise false

      • write

        public static int write(Sequence in,
        int fileType,
        OutputStream out)
                 throws IOException
        Writes a stream of bytes representing a file of the MIDI file type indicated to the output stream provided.
        Parameters:
        in - sequence containing MIDI data to be written to the file
        fileType - the file type of the file to be written to the output stream
        out - stream to which the file data should be written
        Returns:
        the number of bytes written to the output stream
        Throws:
        IOException - if an I/O exception occurs
        IllegalArgumentException - if the file format is not supported by the system
        See Also:
        isFileTypeSupported(int, Sequence), getMidiFileTypes(Sequence)

      • write

        public static int write(Sequence in,
        int type,
        File out)
                 throws IOException
        Writes a stream of bytes representing a file of the MIDI file type indicated to the external file provided.
        Parameters:
        in - sequence containing MIDI data to be written to the file
        type - the file type of the file to be written to the output stream
        out - external file to which the file data should be written
        Returns:
        the number of bytes written to the file
        Throws:
        IOException - if an I/O exception occurs
        IllegalArgumentException - if the file type is not supported by the system
        See Also:
        isFileTypeSupported(int, Sequence), getMidiFileTypes(Sequence)

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/sound/midi/midisystem.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut