- java.lang.Object
-
- javax.imageio.stream.ImageInputStreamImpl
-
- javax.imageio.stream.ImageOutputStreamImpl
-
- javax.imageio.stream.MemoryCacheImageOutputStream
-
- All Implemented Interfaces:
- Closeable, DataInput, DataOutput, AutoCloseable, ImageInputStream, ImageOutputStream
public class MemoryCacheImageOutputStream extends ImageOutputStreamImpl
An implementation ofImageOutputStream
that writes its output to a regularOutputStream
. A memory buffer is used to cache at least the data between the discard position and the current write position. The only constructor takes anOutputStream
, so this class may not be used for read/modify/write operations. Reading can occur only on parts of the stream that have already been written to the cache and not yet flushed.
-
-
Field Summary
-
Fields inherited from class javax.imageio.stream.ImageInputStreamImpl
bitOffset, byteOrder, flushedPos, streamPos
-
-
Constructor Summary
Constructors Constructor and Description MemoryCacheImageOutputStream(OutputStream stream)
Constructs aMemoryCacheImageOutputStream
that will write to a givenOutputStream
.
-
Method Summary
Methods Modifier and Type Method and Description void
close()
Closes thisMemoryCacheImageOutputStream
.void
flushBefore(long pos)
Discards the initial portion of the stream prior to the indicated postion.boolean
isCached()
Returnstrue
since thisImageOutputStream
caches data in order to allow seeking backwards.boolean
isCachedFile()
Returnsfalse
since thisImageOutputStream
does not maintain a file cache.boolean
isCachedMemory()
Returnstrue
since thisImageOutputStream
maintains a main memory cache.long
length()
Returns-1L
to indicate that the stream has unknown length.int
read()
Reads a single byte from the stream and returns it as anint
between 0 and 255.int
read(byte[] b, int off, int len)
Reads up tolen
bytes from the stream, and stores them intob
starting at indexoff
.void
write(byte[] b, int off, int len)
Writes a sequence of bytes to the stream at the current position.void
write(int b)
Writes a single byte to the stream at the current position.-
Methods inherited from class javax.imageio.stream.ImageOutputStreamImpl
flushBits, write, writeBit, writeBits, writeBoolean, writeByte, writeBytes, writeChar, writeChars, writeChars, writeDouble, writeDoubles, writeFloat, writeFloats, writeInt, writeInts, writeLong, writeLongs, writeShort, writeShorts, writeUTF
-
Methods inherited from class javax.imageio.stream.ImageInputStreamImpl
checkClosed, finalize, flush, getBitOffset, getByteOrder, getFlushedPosition, getStreamPosition, mark, read, readBit, readBits, readBoolean, readByte, readBytes, readChar, readDouble, readFloat, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readInt, readLine, readLong, readShort, readUnsignedByte, readUnsignedInt, readUnsignedShort, readUTF, reset, seek, setBitOffset, setByteOrder, skipBytes, skipBytes
-
Methods inherited from class java.lang.Object
clone, equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
-
Methods inherited from interface javax.imageio.stream.ImageInputStream
flush, getBitOffset, getByteOrder, getFlushedPosition, getStreamPosition, mark, read, readBit, readBits, readBoolean, readByte, readBytes, readChar, readDouble, readFloat, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readInt, readLine, readLong, readShort, readUnsignedByte, readUnsignedInt, readUnsignedShort, readUTF, reset, seek, setBitOffset, setByteOrder, skipBytes, skipBytes
-
-
-
-
Constructor Detail
-
MemoryCacheImageOutputStream
public MemoryCacheImageOutputStream(OutputStream stream)
Constructs aMemoryCacheImageOutputStream
that will write to a givenOutputStream
.- Parameters:
stream
- anOutputStream
to write to.- Throws:
IllegalArgumentException
- ifstream
isnull
.
-
-
Method Detail
-
read
public int read() throws IOException
Description copied from class:ImageInputStreamImpl
Reads a single byte from the stream and returns it as anint
between 0 and 255. If EOF is reached,-1
is returned.Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
The bit offset within the stream must be reset to zero before the read occurs.
- Specified by:
read
in interfaceImageInputStream
- Specified by:
read
in classImageInputStreamImpl
- Returns:
- the value of the next byte in the stream, or
-1
if EOF is reached. - Throws:
IOException
- if the stream has been closed.
-
read
public int read(byte[] b, int off, int len) throws IOException
Description copied from class:ImageInputStreamImpl
Reads up tolen
bytes from the stream, and stores them intob
starting at indexoff
. If no bytes can be read because the end of the stream has been reached,-1
is returned.The bit offset within the stream must be reset to zero before the read occurs.
Subclasses must provide an implementation for this method. The subclass implementation should update the stream position before exiting.
- Specified by:
read
in interfaceImageInputStream
- Specified by:
read
in classImageInputStreamImpl
- Parameters:
b
- an array of bytes to be written to.off
- the starting position withinb
to write to.len
- the maximum number of bytes to read.- Returns:
- the number of bytes actually read, or
-1
to indicate EOF. - Throws:
IOException
- if an I/O error occurs.
-
write
public void write(int b) throws IOException
Description copied from interface:ImageOutputStream
Writes a single byte to the stream at the current position. The 24 high-order bits ofb
are ignored.If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the
method offlushBits
to guarantee this.ImageOutputStreamImpl
- Specified by:
write
in interfaceDataOutput
- Specified by:
write
in interfaceImageOutputStream
- Specified by:
write
in classImageOutputStreamImpl
- Parameters:
b
- anint
whose lower 8 bits are to be written.- Throws:
IOException
- if an I/O error occurs.
-
write
public void write(byte[] b, int off, int len) throws IOException
Description copied from interface:ImageOutputStream
Writes a sequence of bytes to the stream at the current position. Iflen
is 0, nothing is written. The byteb[off]
is written first, then the byteb[off + 1]
, and so on.If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the
method offlushBits
to guarantee this.ImageOutputStreamImpl
- Specified by:
write
in interfaceDataOutput
- Specified by:
write
in interfaceImageOutputStream
- Specified by:
write
in classImageOutputStreamImpl
- Parameters:
b
- an array ofbyte
s to be written.off
- the start offset in the data.len
- the number ofbyte
s to write.- Throws:
IOException
- if an I/O error occurs.
-
length
public long length()
Description copied from class:ImageInputStreamImpl
Returns-1L
to indicate that the stream has unknown length. Subclasses must override this method to provide actual length information.- Specified by:
length
in interfaceImageInputStream
- Overrides:
length
in classImageInputStreamImpl
- Returns:
- -1L to indicate unknown length.
-
isCached
public boolean isCached()
Returnstrue
since thisImageOutputStream
caches data in order to allow seeking backwards.- Specified by:
isCached
in interfaceImageInputStream
- Overrides:
isCached
in classImageInputStreamImpl
- Returns:
true
.- See Also:
isCachedMemory()
,isCachedFile()
-
isCachedFile
public boolean isCachedFile()
Returnsfalse
since thisImageOutputStream
does not maintain a file cache.- Specified by:
isCachedFile
in interfaceImageInputStream
- Overrides:
isCachedFile
in classImageInputStreamImpl
- Returns:
false
.- See Also:
isCached()
,isCachedMemory()
-
isCachedMemory
public boolean isCachedMemory()
Returnstrue
since thisImageOutputStream
maintains a main memory cache.- Specified by:
isCachedMemory
in interfaceImageInputStream
- Overrides:
isCachedMemory
in classImageInputStreamImpl
- Returns:
true
.- See Also:
isCached()
,isCachedFile()
-
close
public void close() throws IOException
Closes thisMemoryCacheImageOutputStream
. All pending data is flushed to the output, and the cache is released. The destinationOutputStream
is not closed.- Specified by:
close
in interfaceCloseable
- Specified by:
close
in interfaceAutoCloseable
- Specified by:
close
in interfaceImageInputStream
- Overrides:
close
in classImageInputStreamImpl
- Throws:
IOException
- if an I/O error occurs.
-
flushBefore
public void flushBefore(long pos) throws IOException
Description copied from interface:ImageInputStream
Discards the initial portion of the stream prior to the indicated postion. Attempting to seek to an offset within the flushed portion of the stream will result in anIndexOutOfBoundsException
.Calling
flushBefore
may allow classes implementing this interface to free up resources such as memory or disk space that are being used to store data from the stream.- Specified by:
flushBefore
in interfaceImageInputStream
- Specified by:
flushBefore
in interfaceImageOutputStream
- Overrides:
flushBefore
in classImageInputStreamImpl
- Parameters:
pos
- along
containing the length of the stream prefix that may be flushed.- Throws:
IOException
- if an I/O error occurs.
-
-
Deutsche Übersetzung
Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.
Vielen Dank im Voraus.
Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-javax/imageio/stream/memorycacheimageoutputstream.html
Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.
Referenzen
Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.