-
- Type Parameters:
E
- the type of elements maintained by this set
- All Superinterfaces:
- Collection<E>, Iterable<E>, Set<E>
- All Known Subinterfaces:
- NavigableSet<E>
- All Known Implementing Classes:
- ConcurrentSkipListSet, TreeSet
public interface SortedSet<E> extends Set<E>
ASet
that further provides a total ordering on its elements. The elements are ordered using their natural ordering, or by aComparator
typically provided at sorted set creation time. The set's iterator will traverse the set in ascending element order. Several additional operations are provided to take advantage of the ordering. (This interface is the set analogue ofSortedMap
.)All elements inserted into a sorted set must implement the Comparable interface (or be accepted by the specified comparator). Furthermore, all such elements must be mutually comparable: e1.compareTo(e2) (or comparator.compare(e1, e2)) must not throw a ClassCastException for any elements e1 and e2 in the sorted set. Attempts to violate this restriction will cause the offending method or constructor invocation to throw a ClassCastException.
Note that the ordering maintained by a sorted set (whether or not an explicit comparator is provided) must be consistent with equals if the sorted set is to correctly implement the Set interface. (See the Comparable interface or Comparator interface for a precise definition of consistent with equals.) This is so because the Set interface is defined in terms of the equals operation, but a sorted set performs all element comparisons using its compareTo (or compare) method, so two elements that are deemed equal by this method are, from the standpoint of the sorted set, equal. The behavior of a sorted set is well-defined even if its ordering is inconsistent with equals; it just fails to obey the general contract of the Set interface.
All general-purpose sorted set implementation classes should provide four "standard" constructors: 1) A void (no arguments) constructor, which creates an empty sorted set sorted according to the natural ordering of its elements. 2) A constructor with a single argument of type Comparator, which creates an empty sorted set sorted according to the specified comparator. 3) A constructor with a single argument of type Collection, which creates a new sorted set with the same elements as its argument, sorted according to the natural ordering of the elements. 4) A constructor with a single argument of type SortedSet, which creates a new sorted set with the same elements and the same ordering as the input sorted set. There is no way to enforce this recommendation, as interfaces cannot contain constructors.
Note: several methods return subsets with restricted ranges. Such ranges are half-open, that is, they include their low endpoint but not their high endpoint (where applicable). If you need a closed range (which includes both endpoints), and the element type allows for calculation of the successor of a given value, merely request the subrange from lowEndpoint to successor(highEndpoint). For example, suppose that s is a sorted set of strings. The following idiom obtains a view containing all of the strings in s from low to high, inclusive:
SortedSet<String> sub = s.subSet(low, high+"\0");
A similar technique can be used to generate an open range (which contains neither endpoint). The following idiom obtains a view containing all of the Strings in s from low to high, exclusive:SortedSet<String> sub = s.subSet(low+"\0", high);
This interface is a member of the Java Collections Framework.
- Since:
- 1.2
- See Also:
Set
,TreeSet
,SortedMap
,Collection
,Comparable
,Comparator
,ClassCastException
-
-
Method Summary
Methods Modifier and Type Method and Description Comparator<? super E>
comparator()
Returns the comparator used to order the elements in this set, or null if this set uses the natural ordering of its elements.E
first()
Returns the first (lowest) element currently in this set.SortedSet<E>
headSet(E toElement)
Returns a view of the portion of this set whose elements are strictly less than toElement.E
last()
Returns the last (highest) element currently in this set.SortedSet<E>
subSet(E fromElement, E toElement)
Returns a view of the portion of this set whose elements range from fromElement, inclusive, to toElement, exclusive.SortedSet<E>
tailSet(E fromElement)
Returns a view of the portion of this set whose elements are greater than or equal to fromElement.
-
-
-
Method Detail
-
comparator
Comparator<? super E> comparator()
Returns the comparator used to order the elements in this set, or null if this set uses the natural ordering of its elements.- Returns:
- the comparator used to order the elements in this set, or null if this set uses the natural ordering of its elements
-
subSet
SortedSet<E> subSet(E fromElement, E toElement)
Returns a view of the portion of this set whose elements range from fromElement, inclusive, to toElement, exclusive. (If fromElement and toElement are equal, the returned set is empty.) The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.
- Parameters:
fromElement
- low endpoint (inclusive) of the returned settoElement
- high endpoint (exclusive) of the returned set- Returns:
- a view of the portion of this set whose elements range from fromElement, inclusive, to toElement, exclusive
- Throws:
ClassCastException
- if fromElement and toElement cannot be compared to one another using this set's comparator (or, if the set has no comparator, using natural ordering). Implementations may, but are not required to, throw this exception if fromElement or toElement cannot be compared to elements currently in the set.NullPointerException
- if fromElement or toElement is null and this set does not permit null elementsIllegalArgumentException
- if fromElement is greater than toElement; or if this set itself has a restricted range, and fromElement or toElement lies outside the bounds of the range
-
headSet
SortedSet<E> headSet(E toElement)
Returns a view of the portion of this set whose elements are strictly less than toElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.
- Parameters:
toElement
- high endpoint (exclusive) of the returned set- Returns:
- a view of the portion of this set whose elements are strictly less than toElement
- Throws:
ClassCastException
- if toElement is not compatible with this set's comparator (or, if the set has no comparator, if toElement does not implementComparable
). Implementations may, but are not required to, throw this exception if toElement cannot be compared to elements currently in the set.NullPointerException
- if toElement is null and this set does not permit null elementsIllegalArgumentException
- if this set itself has a restricted range, and toElement lies outside the bounds of the range
-
tailSet
SortedSet<E> tailSet(E fromElement)
Returns a view of the portion of this set whose elements are greater than or equal to fromElement. The returned set is backed by this set, so changes in the returned set are reflected in this set, and vice-versa. The returned set supports all optional set operations that this set supports.The returned set will throw an IllegalArgumentException on an attempt to insert an element outside its range.
- Parameters:
fromElement
- low endpoint (inclusive) of the returned set- Returns:
- a view of the portion of this set whose elements are greater than or equal to fromElement
- Throws:
ClassCastException
- if fromElement is not compatible with this set's comparator (or, if the set has no comparator, if fromElement does not implementComparable
). Implementations may, but are not required to, throw this exception if fromElement cannot be compared to elements currently in the set.NullPointerException
- if fromElement is null and this set does not permit null elementsIllegalArgumentException
- if this set itself has a restricted range, and fromElement lies outside the bounds of the range
-
first
E first()
Returns the first (lowest) element currently in this set.- Returns:
- the first (lowest) element currently in this set
- Throws:
NoSuchElementException
- if this set is empty
-
last
E last()
Returns the last (highest) element currently in this set.- Returns:
- the last (highest) element currently in this set
- Throws:
NoSuchElementException
- if this set is empty
-
-
Deutsche Übersetzung
Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.
Vielen Dank im Voraus.
Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-java/util/sortedset.html
Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.
Referenzen
Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.