java.nio.channels

Class FileChannel

Inhaltsverzeichnis
  • All Implemented Interfaces:
    Closeable, AutoCloseable, ByteChannel, Channel, GatheringByteChannel, InterruptibleChannel, ReadableByteChannel, ScatteringByteChannel, SeekableByteChannel, WritableByteChannel

    public abstract class FileChannel
extends AbstractInterruptibleChannel
implements SeekableByteChannel, GatheringByteChannel, ScatteringByteChannel
    A channel for reading, writing, mapping, and manipulating a file.

    A file channel is a SeekableByteChannel that is connected to a file. It has a current position within its file which can be both queried and modified. The file itself contains a variable-length sequence of bytes that can be read and written and whose current size can be queried. The size of the file increases when bytes are written beyond its current size; the size of the file decreases when it is truncated. The file may also have some associated metadata such as access permissions, content type, and last-modification time; this class does not define methods for metadata access.

    In addition to the familiar read, write, and close operations of byte channels, this class defines the following file-specific operations:

    • Bytes may be read or written at an absolute position in a file in a way that does not affect the channel's current position.

    • A region of a file may be mapped directly into memory; for large files this is often much more efficient than invoking the usual read or write methods.

    • Updates made to a file may be forced out to the underlying storage device, ensuring that data are not lost in the event of a system crash.

    • Bytes can be transferred from a file to some other channel, and vice versa, in a way that can be optimized by many operating systems into a very fast transfer directly to or from the filesystem cache.

    • A region of a file may be locked against access by other programs.

    File channels are safe for use by multiple concurrent threads. The close method may be invoked at any time, as specified by the Channel interface. Only one operation that involves the channel's position or can change its file's size may be in progress at any given time; attempts to initiate a second such operation while the first is still in progress will block until the first operation completes. Other operations, in particular those that take an explicit position, may proceed concurrently; whether they in fact do so is dependent upon the underlying implementation and is therefore unspecified.

    The view of a file provided by an instance of this class is guaranteed to be consistent with other views of the same file provided by other instances in the same program. The view provided by an instance of this class may or may not, however, be consistent with the views seen by other concurrently-running programs due to caching performed by the underlying operating system and delays induced by network-filesystem protocols. This is true regardless of the language in which these other programs are written, and whether they are running on the same machine or on some other machine. The exact nature of any such inconsistencies are system-dependent and are therefore unspecified.

    A file channel is created by invoking one of the open methods defined by this class. A file channel can also be obtained from an existing FileInputStream, FileOutputStream, or RandomAccessFile object by invoking that object's getChannel method, which returns a file channel that is connected to the same underlying file. Where the file channel is obtained from an existing stream or random access file then the state of the file channel is intimately connected to that of the object whose getChannel method returned the channel. Changing the channel's position, whether explicitly or by reading or writing bytes, will change the file position of the originating object, and vice versa. Changing the file's length via the file channel will change the length seen via the originating object, and vice versa. Changing the file's content by writing bytes will change the content seen by the originating object, and vice versa.

    At various points this class specifies that an instance that is "open for reading," "open for writing," or "open for reading and writing" is required. A channel obtained via the getChannel method of a FileInputStream instance will be open for reading. A channel obtained via the getChannel method of a FileOutputStream instance will be open for writing. Finally, a channel obtained via the getChannel method of a RandomAccessFile instance will be open for reading if the instance was created with mode "r" and will be open for reading and writing if the instance was created with mode "rw".

    A file channel that is open for writing may be in append mode, for example if it was obtained from a file-output stream that was created by invoking the FileOutputStream(File,boolean) constructor and passing true for the second parameter. In this mode each invocation of a relative write operation first advances the position to the end of the file and then writes the requested data. Whether the advancement of the position and the writing of the data are done in a single atomic operation is system-dependent and therefore unspecified.

    Since:
    1.4
    See Also:
    FileInputStream.getChannel(), FileOutputStream.getChannel(), RandomAccessFile.getChannel()

    • Method Summary

      Methods 
      Modifier and Type Method and Description
      abstract void force(boolean metaData)
      Forces any updates to this channel's file to be written to the storage device that contains it.
      FileLock lock()
      Acquires an exclusive lock on this channel's file.
      abstract FileLock lock(long position, long size, boolean shared)
      Acquires a lock on the given region of this channel's file.
      abstract MappedByteBuffer map(FileChannel.MapMode mode, long position, long size)
      Maps a region of this channel's file directly into memory.
      static FileChannel open(Path path, OpenOption... options)
      Opens or creates a file, returning a file channel to access the file.
      static FileChannel open(Path path, Set<? extends OpenOption> options, FileAttribute<?>... attrs)
      Opens or creates a file, returning a file channel to access the file.
      abstract long position()
      Returns this channel's file position.
      abstract FileChannel position(long newPosition)
      Sets this channel's file position.
      abstract int read(ByteBuffer dst)
      Reads a sequence of bytes from this channel into the given buffer.
      long read(ByteBuffer[] dsts)
      Reads a sequence of bytes from this channel into the given buffers.
      abstract long read(ByteBuffer[] dsts, int offset, int length)
      Reads a sequence of bytes from this channel into a subsequence of the given buffers.
      abstract int read(ByteBuffer dst, long position)
      Reads a sequence of bytes from this channel into the given buffer, starting at the given file position.
      abstract long size()
      Returns the current size of this channel's file.
      abstract long transferFrom(ReadableByteChannel src, long position, long count)
      Transfers bytes into this channel's file from the given readable byte channel.
      abstract long transferTo(long position, long count, WritableByteChannel target)
      Transfers bytes from this channel's file to the given writable byte channel.
      abstract FileChannel truncate(long size)
      Truncates this channel's file to the given size.
      FileLock tryLock()
      Attempts to acquire an exclusive lock on this channel's file.
      abstract FileLock tryLock(long position, long size, boolean shared)
      Attempts to acquire a lock on the given region of this channel's file.
      abstract int write(ByteBuffer src)
      Writes a sequence of bytes to this channel from the given buffer.
      long write(ByteBuffer[] srcs)
      Writes a sequence of bytes to this channel from the given buffers.
      abstract long write(ByteBuffer[] srcs, int offset, int length)
      Writes a sequence of bytes to this channel from a subsequence of the given buffers.
      abstract int write(ByteBuffer src, long position)
      Writes a sequence of bytes to this channel from the given buffer, starting at the given file position.

      Erste Seite von API Java Inhaltsverzeichnis Haut

      • Methods inherited from interface java.nio.channels.Channel

        close, isOpen

    • Constructor Detail

      • FileChannel

        protected FileChannel()
        Initializes a new instance of this class.

    • Method Detail

      • open

        public static FileChannel open(Path path,
               Set<? extends OpenOption> options,
               FileAttribute<?>... attrs)
                        throws IOException
        Opens or creates a file, returning a file channel to access the file.

        The options parameter determines how the file is opened. The READ and WRITE options determine if the file should be opened for reading and/or writing. If neither option (or the APPEND option) is contained in the array then the file is opened for reading. By default reading or writing commences at the beginning of the file.

        In the addition to READ and WRITE, the following options may be present:

        Option Description
        APPEND If this option is present then the file is opened for writing and each invocation of the channel's write method first advances the position to the end of the file and then writes the requested data. Whether the advancement of the position and the writing of the data are done in a single atomic operation is system-dependent and therefore unspecified. This option may not be used in conjunction with the READ or TRUNCATE_EXISTING options.
        TRUNCATE_EXISTING If this option is present then the existing file is truncated to a size of 0 bytes. This option is ignored when the file is opened only for reading.
        CREATE_NEW If this option is present then a new file is created, failing if the file already exists. When creating a file the check for the existence of the file and the creation of the file if it does not exist is atomic with respect to other file system operations. This option is ignored when the file is opened only for reading.
        CREATE If this option is present then an existing file is opened if it exists, otherwise a new file is created. When creating a file the check for the existence of the file and the creation of the file if it does not exist is atomic with respect to other file system operations. This option is ignored if the CREATE_NEW option is also present or the file is opened only for reading.
        DELETE_ON_CLOSE When this option is present then the implementation makes a best effort attempt to delete the file when closed by the the close method. If the close method is not invoked then a best effort attempt is made to delete the file when the Java virtual machine terminates.
        SPARSE When creating a new file this option is a hint that the new file will be sparse. This option is ignored when not creating a new file.
        SYNC Requires that every update to the file's content or metadata be written synchronously to the underlying storage device. (see Synchronized I/O file integrity).
        DSYNC Requires that every update to the file's content be written synchronously to the underlying storage device. (see Synchronized I/O file integrity).

        Erste Seite von API Java Inhaltsverzeichnis Haut

        An implementation may also support additional options.

        The attrs parameter is an optional array of file file-attributes to set atomically when creating the file.

        The new channel is created by invoking the newFileChannel method on the provider that created the Path.

        Parameters:
        path - The path of the file to open or create
        options - Options specifying how the file is opened
        attrs - An optional list of file attributes to set atomically when creating the file
        Returns:
        A new file channel
        Throws:
        IllegalArgumentException - If the set contains an invalid combination of options
        UnsupportedOperationException - If the path is associated with a provider that does not support creating file channels, or an unsupported open option is specified, or the array contains an attribute that cannot be set atomically when creating the file
        IOException - If an I/O error occurs
        SecurityException - If a security manager is installed and it denies an unspecified permission required by the implementation. In the case of the default provider, the SecurityManager.checkRead(String) method is invoked to check read access if the file is opened for reading. The SecurityManager.checkWrite(String) method is invoked to check write access if the file is opened for writing
        Since:
        1.7

      • open

        public static FileChannel open(Path path,
               OpenOption... options)
                        throws IOException
        Opens or creates a file, returning a file channel to access the file.

        An invocation of this method behaves in exactly the same way as the invocation 

             fc.open(file, opts, new FileAttribute<?>[0]);
        where opts is a set of the options specified in the options array.
        Parameters:
        path - The path of the file to open or create
        options - Options specifying how the file is opened
        Returns:
        A new file channel
        Throws:
        IllegalArgumentException - If the set contains an invalid combination of options
        UnsupportedOperationException - If the path is associated with a provider that does not support creating file channels, or an unsupported open option is specified
        IOException - If an I/O error occurs
        SecurityException - If a security manager is installed and it denies an unspecified permission required by the implementation. In the case of the default provider, the SecurityManager.checkRead(String) method is invoked to check read access if the file is opened for reading. The SecurityManager.checkWrite(String) method is invoked to check write access if the file is opened for writing
        Since:
        1.7

      • read

        public abstract int read(ByteBuffer dst)
                  throws IOException
        Reads a sequence of bytes from this channel into the given buffer.

        Bytes are read starting at this channel's current file position, and then the file position is updated with the number of bytes actually read. Otherwise this method behaves exactly as specified in the ReadableByteChannel interface.

        Specified by:
        read in interface ReadableByteChannel
        Specified by:
        read in interface SeekableByteChannel
        Parameters:
        dst - The buffer into which bytes are to be transferred
        Returns:
        The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • read

        public abstract long read(ByteBuffer[] dsts,
        int offset,
        int length)
                   throws IOException
        Reads a sequence of bytes from this channel into a subsequence of the given buffers.

        Bytes are read starting at this channel's current file position, and then the file position is updated with the number of bytes actually read. Otherwise this method behaves exactly as specified in the ScatteringByteChannel interface.

        Specified by:
        read in interface ScatteringByteChannel
        Parameters:
        dsts - The buffers into which bytes are to be transferred
        offset - The offset within the buffer array of the first buffer into which bytes are to be transferred; must be non-negative and no larger than dsts.length
        length - The maximum number of buffers to be accessed; must be non-negative and no larger than dsts.length - offset
        Returns:
        The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • read

        public final long read(ByteBuffer[] dsts)
                throws IOException
        Reads a sequence of bytes from this channel into the given buffers.

        Bytes are read starting at this channel's current file position, and then the file position is updated with the number of bytes actually read. Otherwise this method behaves exactly as specified in the ScatteringByteChannel interface.

        Specified by:
        read in interface ScatteringByteChannel
        Parameters:
        dsts - The buffers into which bytes are to be transferred
        Returns:
        The number of bytes read, possibly zero, or -1 if the channel has reached end-of-stream
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • write

        public abstract int write(ByteBuffer src)
                   throws IOException
        Writes a sequence of bytes to this channel from the given buffer.

        Bytes are written starting at this channel's current file position unless the channel is in append mode, in which case the position is first advanced to the end of the file. The file is grown, if necessary, to accommodate the written bytes, and then the file position is updated with the number of bytes actually written. Otherwise this method behaves exactly as specified by the WritableByteChannel interface.

        Specified by:
        write in interface SeekableByteChannel
        Specified by:
        write in interface WritableByteChannel
        Parameters:
        src - The buffer from which bytes are to be retrieved
        Returns:
        The number of bytes written, possibly zero
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • write

        public abstract long write(ByteBuffer[] srcs,
         int offset,
         int length)
                    throws IOException
        Writes a sequence of bytes to this channel from a subsequence of the given buffers.

        Bytes are written starting at this channel's current file position unless the channel is in append mode, in which case the position is first advanced to the end of the file. The file is grown, if necessary, to accommodate the written bytes, and then the file position is updated with the number of bytes actually written. Otherwise this method behaves exactly as specified in the GatheringByteChannel interface.

        Specified by:
        write in interface GatheringByteChannel
        Parameters:
        srcs - The buffers from which bytes are to be retrieved
        offset - The offset within the buffer array of the first buffer from which bytes are to be retrieved; must be non-negative and no larger than srcs.length
        length - The maximum number of buffers to be accessed; must be non-negative and no larger than srcs.length - offset
        Returns:
        The number of bytes written, possibly zero
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • write

        public final long write(ByteBuffer[] srcs)
                 throws IOException
        Writes a sequence of bytes to this channel from the given buffers.

        Bytes are written starting at this channel's current file position unless the channel is in append mode, in which case the position is first advanced to the end of the file. The file is grown, if necessary, to accommodate the written bytes, and then the file position is updated with the number of bytes actually written. Otherwise this method behaves exactly as specified in the GatheringByteChannel interface.

        Specified by:
        write in interface GatheringByteChannel
        Parameters:
        srcs - The buffers from which bytes are to be retrieved
        Returns:
        The number of bytes written, possibly zero
        Throws:
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • position

        public abstract long position()
                       throws IOException
        Returns this channel's file position.

        Specified by:
        position in interface SeekableByteChannel
        Returns:
        This channel's file position, a non-negative integer counting the number of bytes from the beginning of the file to the current position
        Throws:
        ClosedChannelException - If this channel is closed
        IOException - If some other I/O error occurs

      • position

        public abstract FileChannel position(long newPosition)
                              throws IOException
        Sets this channel's file position.

        Setting the position to a value that is greater than the file's current size is legal but does not change the size of the file. A later attempt to read bytes at such a position will immediately return an end-of-file indication. A later attempt to write bytes at such a position will cause the file to be grown to accommodate the new bytes; the values of any bytes between the previous end-of-file and the newly-written bytes are unspecified.

        Specified by:
        position in interface SeekableByteChannel
        Parameters:
        newPosition - The new position, a non-negative integer counting the number of bytes from the beginning of the file
        Returns:
        This file channel
        Throws:
        ClosedChannelException - If this channel is closed
        IllegalArgumentException - If the new position is negative
        IOException - If some other I/O error occurs

      • truncate

        public abstract FileChannel truncate(long size)
                              throws IOException
        Truncates this channel's file to the given size.

        If the given size is less than the file's current size then the file is truncated, discarding any bytes beyond the new end of the file. If the given size is greater than or equal to the file's current size then the file is not modified. In either case, if this channel's file position is greater than the given size then it is set to that size.

        Specified by:
        truncate in interface SeekableByteChannel
        Parameters:
        size - The new size, a non-negative byte count
        Returns:
        This file channel
        Throws:
        NonWritableChannelException - If this channel was not opened for writing
        ClosedChannelException - If this channel is closed
        IllegalArgumentException - If the new size is negative
        IOException - If some other I/O error occurs

      • force

        public abstract void force(boolean metaData)
                    throws IOException
        Forces any updates to this channel's file to be written to the storage device that contains it.

        If this channel's file resides on a local storage device then when this method returns it is guaranteed that all changes made to the file since this channel was created, or since this method was last invoked, will have been written to that device. This is useful for ensuring that critical information is not lost in the event of a system crash.

        If the file does not reside on a local device then no such guarantee is made.

        The metaData parameter can be used to limit the number of I/O operations that this method is required to perform. Passing false for this parameter indicates that only updates to the file's content need be written to storage; passing true indicates that updates to both the file's content and metadata must be written, which generally requires at least one more I/O operation. Whether this parameter actually has any effect is dependent upon the underlying operating system and is therefore unspecified.

        Invoking this method may cause an I/O operation to occur even if the channel was only opened for reading. Some operating systems, for example, maintain a last-access time as part of a file's metadata, and this time is updated whenever the file is read. Whether or not this is actually done is system-dependent and is therefore unspecified.

        This method is only guaranteed to force changes that were made to this channel's file via the methods defined in this class. It may or may not force changes that were made by modifying the content of a mapped byte buffer obtained by invoking the map method. Invoking the force method of the mapped byte buffer will force changes made to the buffer's content to be written.

        Parameters:
        metaData - If true then this method is required to force changes to both the file's content and metadata to be written to storage; otherwise, it need only force content changes to be written
        Throws:
        ClosedChannelException - If this channel is closed
        IOException - If some other I/O error occurs

      • transferTo

        public abstract long transferTo(long position,
              long count,
              WritableByteChannel target)
                         throws IOException
        Transfers bytes from this channel's file to the given writable byte channel.

        An attempt is made to read up to count bytes starting at the given position in this channel's file and write them to the target channel. An invocation of this method may or may not transfer all of the requested bytes; whether or not it does so depends upon the natures and states of the channels. Fewer than the requested number of bytes are transferred if this channel's file contains fewer than count bytes starting at the given position, or if the target channel is non-blocking and it has fewer than count bytes free in its output buffer.

        This method does not modify this channel's position. If the given position is greater than the file's current size then no bytes are transferred. If the target channel has a position then bytes are written starting at that position and then the position is incremented by the number of bytes written.

        This method is potentially much more efficient than a simple loop that reads from this channel and writes to the target channel. Many operating systems can transfer bytes directly from the filesystem cache to the target channel without actually copying them.

        Parameters:
        position - The position within the file at which the transfer is to begin; must be non-negative
        count - The maximum number of bytes to be transferred; must be non-negative
        target - The target channel
        Returns:
        The number of bytes, possibly zero, that were actually transferred
        Throws:
        IllegalArgumentException - If the preconditions on the parameters do not hold
        NonReadableChannelException - If this channel was not opened for reading
        NonWritableChannelException - If the target channel was not opened for writing
        ClosedChannelException - If either this channel or the target channel is closed
        AsynchronousCloseException - If another thread closes either channel while the transfer is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the transfer is in progress, thereby closing both channels and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • transferFrom

        public abstract long transferFrom(ReadableByteChannel src,
                long position,
                long count)
                           throws IOException
        Transfers bytes into this channel's file from the given readable byte channel.

        An attempt is made to read up to count bytes from the source channel and write them to this channel's file starting at the given position. An invocation of this method may or may not transfer all of the requested bytes; whether or not it does so depends upon the natures and states of the channels. Fewer than the requested number of bytes will be transferred if the source channel has fewer than count bytes remaining, or if the source channel is non-blocking and has fewer than count bytes immediately available in its input buffer.

        This method does not modify this channel's position. If the given position is greater than the file's current size then no bytes are transferred. If the source channel has a position then bytes are read starting at that position and then the position is incremented by the number of bytes read.

        This method is potentially much more efficient than a simple loop that reads from the source channel and writes to this channel. Many operating systems can transfer bytes directly from the source channel into the filesystem cache without actually copying them.

        Parameters:
        src - The source channel
        position - The position within the file at which the transfer is to begin; must be non-negative
        count - The maximum number of bytes to be transferred; must be non-negative
        Returns:
        The number of bytes, possibly zero, that were actually transferred
        Throws:
        IllegalArgumentException - If the preconditions on the parameters do not hold
        NonReadableChannelException - If the source channel was not opened for reading
        NonWritableChannelException - If this channel was not opened for writing
        ClosedChannelException - If either this channel or the source channel is closed
        AsynchronousCloseException - If another thread closes either channel while the transfer is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the transfer is in progress, thereby closing both channels and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • read

        public abstract int read(ByteBuffer dst,
       long position)
                  throws IOException
        Reads a sequence of bytes from this channel into the given buffer, starting at the given file position.

        This method works in the same manner as the read(ByteBuffer) method, except that bytes are read starting at the given file position rather than at the channel's current position. This method does not modify this channel's position. If the given position is greater than the file's current size then no bytes are read.

        Parameters:
        dst - The buffer into which bytes are to be transferred
        position - The file position at which the transfer is to begin; must be non-negative
        Returns:
        The number of bytes read, possibly zero, or -1 if the given position is greater than or equal to the file's current size
        Throws:
        IllegalArgumentException - If the position is negative
        NonReadableChannelException - If this channel was not opened for reading
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the read operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the read operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • write

        public abstract int write(ByteBuffer src,
        long position)
                   throws IOException
        Writes a sequence of bytes to this channel from the given buffer, starting at the given file position.

        This method works in the same manner as the write(ByteBuffer) method, except that bytes are written starting at the given file position rather than at the channel's current position. This method does not modify this channel's position. If the given position is greater than the file's current size then the file will be grown to accommodate the new bytes; the values of any bytes between the previous end-of-file and the newly-written bytes are unspecified.

        Parameters:
        src - The buffer from which bytes are to be transferred
        position - The file position at which the transfer is to begin; must be non-negative
        Returns:
        The number of bytes written, possibly zero
        Throws:
        IllegalArgumentException - If the position is negative
        NonWritableChannelException - If this channel was not opened for writing
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the write operation is in progress
        ClosedByInterruptException - If another thread interrupts the current thread while the write operation is in progress, thereby closing the channel and setting the current thread's interrupt status
        IOException - If some other I/O error occurs

      • map

        public abstract MappedByteBuffer map(FileChannel.MapMode mode,
                   long position,
                   long size)
                              throws IOException
        Maps a region of this channel's file directly into memory.

        A region of a file may be mapped into memory in one of three modes:

        • Read-only: Any attempt to modify the resulting buffer will cause a ReadOnlyBufferException to be thrown. (MapMode.READ_ONLY)

        • Read/write: Changes made to the resulting buffer will eventually be propagated to the file; they may or may not be made visible to other programs that have mapped the same file. (MapMode.READ_WRITE)

        • Private: Changes made to the resulting buffer will not be propagated to the file and will not be visible to other programs that have mapped the same file; instead, they will cause private copies of the modified portions of the buffer to be created. (MapMode.PRIVATE)

        For a read-only mapping, this channel must have been opened for reading; for a read/write or private mapping, this channel must have been opened for both reading and writing.

        The mapped byte buffer returned by this method will have a position of zero and a limit and capacity of size; its mark will be undefined. The buffer and the mapping that it represents will remain valid until the buffer itself is garbage-collected.

        A mapping, once established, is not dependent upon the file channel that was used to create it. Closing the channel, in particular, has no effect upon the validity of the mapping.

        Many of the details of memory-mapped files are inherently dependent upon the underlying operating system and are therefore unspecified. The behavior of this method when the requested region is not completely contained within this channel's file is unspecified. Whether changes made to the content or size of the underlying file, by this program or another, are propagated to the buffer is unspecified. The rate at which changes to the buffer are propagated to the file is unspecified.

        For most operating systems, mapping a file into memory is more expensive than reading or writing a few tens of kilobytes of data via the usual read and write methods. From the standpoint of performance it is generally only worth mapping relatively large files into memory.

        Parameters:
        mode - One of the constants READ_ONLY, READ_WRITE, or PRIVATE defined in the FileChannel.MapMode class, according to whether the file is to be mapped read-only, read/write, or privately (copy-on-write), respectively
        position - The position within the file at which the mapped region is to start; must be non-negative
        size - The size of the region to be mapped; must be non-negative and no greater than Integer.MAX_VALUE
        Returns:
        The mapped byte buffer
        Throws:
        NonReadableChannelException - If the mode is READ_ONLY but this channel was not opened for reading
        NonWritableChannelException - If the mode is READ_WRITE or PRIVATE but this channel was not opened for both reading and writing
        IllegalArgumentException - If the preconditions on the parameters do not hold
        IOException - If some other I/O error occurs
        See Also:
        FileChannel.MapMode, MappedByteBuffer

      • lock

        public abstract FileLock lock(long position,
            long size,
            boolean shared)
                       throws IOException
        Acquires a lock on the given region of this channel's file.

        An invocation of this method will block until the region can be locked, this channel is closed, or the invoking thread is interrupted, whichever comes first.

        If this channel is closed by another thread during an invocation of this method then an AsynchronousCloseException will be thrown.

        If the invoking thread is interrupted while waiting to acquire the lock then its interrupt status will be set and a FileLockInterruptionException will be thrown. If the invoker's interrupt status is set when this method is invoked then that exception will be thrown immediately; the thread's interrupt status will not be changed.

        The region specified by the position and size parameters need not be contained within, or even overlap, the actual underlying file. Lock regions are fixed in size; if a locked region initially contains the end of the file and the file grows beyond the region then the new portion of the file will not be covered by the lock. If a file is expected to grow in size and a lock on the entire file is required then a region starting at zero, and no smaller than the expected maximum size of the file, should be locked. The zero-argument lock() method simply locks a region of size Long.MAX_VALUE.

        Some operating systems do not support shared locks, in which case a request for a shared lock is automatically converted into a request for an exclusive lock. Whether the newly-acquired lock is shared or exclusive may be tested by invoking the resulting lock object's isShared method.

        File locks are held on behalf of the entire Java virtual machine. They are not suitable for controlling access to a file by multiple threads within the same virtual machine.

        Parameters:
        position - The position at which the locked region is to start; must be non-negative
        size - The size of the locked region; must be non-negative, and the sum position + size must be non-negative
        shared - true to request a shared lock, in which case this channel must be open for reading (and possibly writing); false to request an exclusive lock, in which case this channel must be open for writing (and possibly reading)
        Returns:
        A lock object representing the newly-acquired lock
        Throws:
        IllegalArgumentException - If the preconditions on the parameters do not hold
        ClosedChannelException - If this channel is closed
        AsynchronousCloseException - If another thread closes this channel while the invoking thread is blocked in this method
        FileLockInterruptionException - If the invoking thread is interrupted while blocked in this method
        OverlappingFileLockException - If a lock that overlaps the requested region is already held by this Java virtual machine, or if another thread is already blocked in this method and is attempting to lock an overlapping region
        NonReadableChannelException - If shared is true this channel was not opened for reading
        NonWritableChannelException - If shared is false but this channel was not opened for writing
        IOException - If some other I/O error occurs
        See Also:
        lock(), tryLock(), tryLock(long,long,boolean)

      • tryLock

        public abstract FileLock tryLock(long position,
               long size,
               boolean shared)
                          throws IOException
        Attempts to acquire a lock on the given region of this channel's file.

        This method does not block. An invocation always returns immediately, either having acquired a lock on the requested region or having failed to do so. If it fails to acquire a lock because an overlapping lock is held by another program then it returns null. If it fails to acquire a lock for any other reason then an appropriate exception is thrown.

        The region specified by the position and size parameters need not be contained within, or even overlap, the actual underlying file. Lock regions are fixed in size; if a locked region initially contains the end of the file and the file grows beyond the region then the new portion of the file will not be covered by the lock. If a file is expected to grow in size and a lock on the entire file is required then a region starting at zero, and no smaller than the expected maximum size of the file, should be locked. The zero-argument tryLock() method simply locks a region of size Long.MAX_VALUE.

        Some operating systems do not support shared locks, in which case a request for a shared lock is automatically converted into a request for an exclusive lock. Whether the newly-acquired lock is shared or exclusive may be tested by invoking the resulting lock object's isShared method.

        File locks are held on behalf of the entire Java virtual machine. They are not suitable for controlling access to a file by multiple threads within the same virtual machine.

        Parameters:
        position - The position at which the locked region is to start; must be non-negative
        size - The size of the locked region; must be non-negative, and the sum position + size must be non-negative
        shared - true to request a shared lock, false to request an exclusive lock
        Returns:
        A lock object representing the newly-acquired lock, or null if the lock could not be acquired because another program holds an overlapping lock
        Throws:
        IllegalArgumentException - If the preconditions on the parameters do not hold
        ClosedChannelException - If this channel is closed
        OverlappingFileLockException - If a lock that overlaps the requested region is already held by this Java virtual machine, or if another thread is already blocked in this method and is attempting to lock an overlapping region of the same file
        IOException - If some other I/O error occurs
        See Also:
        lock(), lock(long,long,boolean), tryLock()

      • tryLock

        public final FileLock tryLock()
                       throws IOException
        Attempts to acquire an exclusive lock on this channel's file.

        An invocation of this method of the form fc.tryLock() behaves in exactly the same way as the invocation 

             fc.tryLock(0L, Long.MAX_VALUE, false)
        Returns:
        A lock object representing the newly-acquired lock, or null if the lock could not be acquired because another program holds an overlapping lock
        Throws:
        ClosedChannelException - If this channel is closed
        OverlappingFileLockException - If a lock that overlaps the requested region is already held by this Java virtual machine, or if another thread is already blocked in this method and is attempting to lock an overlapping region
        IOException - If some other I/O error occurs
        See Also:
        lock(), lock(long,long,boolean), tryLock(long,long,boolean)

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-java/nio/channels/filechannel.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut