java.awt.font

Class TextLayout

Inhaltsverzeichnis
  • All Implemented Interfaces:
    Cloneable

    public final class TextLayout
extends Object
implements Cloneable
    TextLayout is an immutable graphical representation of styled character data.

    It provides the following capabilities:

    • implicit bidirectional analysis and reordering,
    • cursor positioning and movement, including split cursors for mixed directional text,
    • highlighting, including both logical and visual highlighting for mixed directional text,
    • multiple baselines (roman, hanging, and centered),
    • hit testing,
    • justification,
    • default font substitution,
    • metric information such as ascent, descent, and advance, and
    • rendering

    A TextLayout object can be rendered using its draw method.

    TextLayout can be constructed either directly or through the use of a LineBreakMeasurer. When constructed directly, the source text represents a single paragraph. LineBreakMeasurer allows styled text to be broken into lines that fit within a particular width. See the LineBreakMeasurer documentation for more information.

    TextLayout construction logically proceeds as follows:

    • paragraph attributes are extracted and examined,
    • text is analyzed for bidirectional reordering, and reordering information is computed if needed,
    • text is segmented into style runs
    • fonts are chosen for style runs, first by using a font if the attribute TextAttribute.FONT is present, otherwise by computing a default font using the attributes that have been defined
    • if text is on multiple baselines, the runs or subruns are further broken into subruns sharing a common baseline,
    • glyphvectors are generated for each run using the chosen font,
    • final bidirectional reordering is performed on the glyphvectors

    All graphical information returned from a TextLayout object's methods is relative to the origin of the TextLayout, which is the intersection of the TextLayout object's baseline with its left edge. Also, coordinates passed into a TextLayout object's methods are assumed to be relative to the TextLayout object's origin. Clients usually need to translate between a TextLayout object's coordinate system and the coordinate system in another object (such as a Graphics object).

    TextLayout objects are constructed from styled text, but they do not retain a reference to their source text. Thus, changes in the text previously used to generate a TextLayout do not affect the TextLayout.

    Three methods on a TextLayout object (getNextRightHit, getNextLeftHit, and hitTestChar) return instances of TextHitInfo. The offsets contained in these TextHitInfo objects are relative to the start of the TextLayout, not to the text used to create the TextLayout. Similarly, TextLayout methods that accept TextHitInfo instances as parameters expect the TextHitInfo object's offsets to be relative to the TextLayout, not to any underlying text storage model.

    Examples:

    Constructing and drawing a TextLayout and its bounding rectangle: 

       Graphics2D g = ...;
   Point2D loc = ...;
   Font font = Font.getFont("Helvetica-bold-italic");
   FontRenderContext frc = g.getFontRenderContext();
   TextLayout layout = new TextLayout("This is a string", font, frc);
   layout.draw(g, (float)loc.getX(), (float)loc.getY());

   Rectangle2D bounds = layout.getBounds();
   bounds.setRect(bounds.getX()+loc.getX(),
                  bounds.getY()+loc.getY(),
                  bounds.getWidth(),
                  bounds.getHeight());
   g.draw(bounds);

    Hit-testing a TextLayout (determining which character is at a particular graphical location): 

       Point2D click = ...;
   TextHitInfo hit = layout.hitTestChar(
                         (float) (click.getX() - loc.getX()),
                         (float) (click.getY() - loc.getY()));

    Responding to a right-arrow key press: 

       int insertionIndex = ...;
   TextHitInfo next = layout.getNextRightHit(insertionIndex);
   if (next != null) {
       // translate graphics to origin of layout on screen
       g.translate(loc.getX(), loc.getY());
       Shape[] carets = layout.getCaretShapes(next.getInsertionIndex());
       g.draw(carets[0]);
       if (carets[1] != null) {
           g.draw(carets[1]);
       }
   }

    Drawing a selection range corresponding to a substring in the source text. The selected area may not be visually contiguous: 

       // selStart, selLimit should be relative to the layout,
   // not to the source text

   int selStart = ..., selLimit = ...;
   Color selectionColor = ...;
   Shape selection = layout.getLogicalHighlightShape(selStart, selLimit);
   // selection may consist of disjoint areas
   // graphics is assumed to be tranlated to origin of layout
   g.setColor(selectionColor);
   g.fill(selection);

    Drawing a visually contiguous selection range. The selection range may correspond to more than one substring in the source text. The ranges of the corresponding source text substrings can be obtained with getLogicalRangesForVisualSelection(): 

       TextHitInfo selStart = ..., selLimit = ...;
   Shape selection = layout.getVisualHighlightShape(selStart, selLimit);
   g.setColor(selectionColor);
   g.fill(selection);
   int[] ranges = getLogicalRangesForVisualSelection(selStart, selLimit);
   // ranges[0], ranges[1] is the first selection range,
   // ranges[2], ranges[3] is the second selection range, etc.

    Note: Font rotations can cause text baselines to be rotated, and multiple runs with different rotations can cause the baseline to bend or zig-zag. In order to account for this (rare) possibility, some APIs are specified to return metrics and take parameters 'in baseline-relative coordinates' (e.g. ascent, advance), and others are in 'in standard coordinates' (e.g. getBounds). Values in baseline-relative coordinates map the 'x' coordinate to the distance along the baseline, (positive x is forward along the baseline), and the 'y' coordinate to a distance along the perpendicular to the baseline at 'x' (postitive y is 90 degrees clockwise from the baseline vector). Values in standard coordinates are measured along the x and y axes, with 0,0 at the origin of the TextLayout. Documentation for each relevant API indicates what values are in what coordinate system. In general, measurement-related APIs are in baseline-relative coordinates, while display-related APIs are in standard coordinates.

    See Also:
    LineBreakMeasurer, TextAttribute, TextHitInfo, LayoutPath

    • Field Detail

      • DEFAULT_CARET_POLICY

        public static final TextLayout.CaretPolicy DEFAULT_CARET_POLICY
        This CaretPolicy is used when a policy is not specified by the client. With this policy, a hit on a character whose direction is the same as the line direction is stronger than a hit on a counterdirectional character. If the characters' directions are the same, a hit on the leading edge of a character is stronger than a hit on the trailing edge of a character.

    • Constructor Detail

      • TextLayout

        public TextLayout(String string,
          Font font,
          FontRenderContext frc)
        Constructs a TextLayout from a String and a Font. All the text is styled using the specified Font.

        The String must specify a single paragraph of text, because an entire paragraph is required for the bidirectional algorithm.

        Parameters:
        string - the text to display
        font - a Font used to style the text
        frc - contains information about a graphics device which is needed to measure the text correctly. Text measurements can vary slightly depending on the device resolution, and attributes such as antialiasing. This parameter does not specify a translation between the TextLayout and user space.

      • TextLayout

        public TextLayout(String string,
          Map<? extends AttributedCharacterIterator.Attribute,?> attributes,
          FontRenderContext frc)
        Constructs a TextLayout from a String and an attribute set.

        All the text is styled using the provided attributes.

        string must specify a single paragraph of text because an entire paragraph is required for the bidirectional algorithm.

        Parameters:
        string - the text to display
        attributes - the attributes used to style the text
        frc - contains information about a graphics device which is needed to measure the text correctly. Text measurements can vary slightly depending on the device resolution, and attributes such as antialiasing. This parameter does not specify a translation between the TextLayout and user space.

      • TextLayout

        public TextLayout(AttributedCharacterIterator text,
          FontRenderContext frc)
        Constructs a TextLayout from an iterator over styled text.

        The iterator must specify a single paragraph of text because an entire paragraph is required for the bidirectional algorithm.

        Parameters:
        text - the styled text to display
        frc - contains information about a graphics device which is needed to measure the text correctly. Text measurements can vary slightly depending on the device resolution, and attributes such as antialiasing. This parameter does not specify a translation between the TextLayout and user space.

    • Method Detail

      • clone

        protected Object clone()
        Creates a copy of this TextLayout.
        Overrides:
        clone in class Object
        Returns:
        a clone of this instance.
        See Also:
        Cloneable

      • getJustifiedLayout

        public TextLayout getJustifiedLayout(float justificationWidth)
        Creates a copy of this TextLayout justified to the specified width.

        If this TextLayout has already been justified, an exception is thrown. If this TextLayout object's justification ratio is zero, a TextLayout identical to this TextLayout is returned.

        Parameters:
        justificationWidth - the width to use when justifying the line. For best results, it should not be too different from the current advance of the line.
        Returns:
        a TextLayout justified to the specified width.
        Throws:
        Error - if this layout has already been justified, an Error is thrown.

      • handleJustify

        protected void handleJustify(float justificationWidth)
        Justify this layout. Overridden by subclassers to control justification (if there were subclassers, that is...) The layout will only justify if the paragraph attributes (from the source text, possibly defaulted by the layout attributes) indicate a non-zero justification ratio. The text will be justified to the indicated width. The current implementation also adjusts hanging punctuation and trailing whitespace to overhang the justification width. Once justified, the layout may not be rejustified.

        Some code may rely on immutablity of layouts. Subclassers should not call this directly, but instead should call getJustifiedLayout, which will call this method on a clone of this layout, preserving the original.

        Parameters:
        justificationWidth - the width to use when justifying the line. For best results, it should not be too different from the current advance of the line.
        See Also:
        getJustifiedLayout(float)

      • getBaseline

        public byte getBaseline()
        Returns the baseline for this TextLayout. The baseline is one of the values defined in Font, which are roman, centered and hanging. Ascent and descent are relative to this baseline. The baselineOffsets are also relative to this baseline.
        Returns:
        the baseline of this TextLayout.
        See Also:
        getBaselineOffsets(), Font

      • getBaselineOffsets

        public float[] getBaselineOffsets()
        Returns the offsets array for the baselines used for this TextLayout.

        The array is indexed by one of the values defined in Font, which are roman, centered and hanging. The values are relative to this TextLayout object's baseline, so that getBaselineOffsets[getBaseline()] == 0. Offsets are added to the position of the TextLayout object's baseline to get the position for the new baseline.

        Returns:
        the offsets array containing the baselines used for this TextLayout.
        See Also:
        getBaseline(), Font

      • getAdvance

        public float getAdvance()
        Returns the advance of this TextLayout. The advance is the distance from the origin to the advance of the rightmost (bottommost) character. This is in baseline-relative coordinates.
        Returns:
        the advance of this TextLayout.

      • getVisibleAdvance

        public float getVisibleAdvance()
        Returns the advance of this TextLayout, minus trailing whitespace. This is in baseline-relative coordinates.
        Returns:
        the advance of this TextLayout without the trailing whitespace.
        See Also:
        getAdvance()

      • getAscent

        public float getAscent()
        Returns the ascent of this TextLayout. The ascent is the distance from the top (right) of the TextLayout to the baseline. It is always either positive or zero. The ascent is sufficient to accomodate superscripted text and is the maximum of the sum of the ascent, offset, and baseline of each glyph. The ascent is the maximum ascent from the baseline of all the text in the TextLayout. It is in baseline-relative coordinates.
        Returns:
        the ascent of this TextLayout.

      • getDescent

        public float getDescent()
        Returns the descent of this TextLayout. The descent is the distance from the baseline to the bottom (left) of the TextLayout. It is always either positive or zero. The descent is sufficient to accomodate subscripted text and is the maximum of the sum of the descent, offset, and baseline of each glyph. This is the maximum descent from the baseline of all the text in the TextLayout. It is in baseline-relative coordinates.
        Returns:
        the descent of this TextLayout.

      • getLeading

        public float getLeading()
        Returns the leading of the TextLayout. The leading is the suggested interline spacing for this TextLayout. This is in baseline-relative coordinates.

        The leading is computed from the leading, descent, and baseline of all glyphvectors in the TextLayout. The algorithm is roughly as follows: 

         maxD = 0;
 maxDL = 0;
 for (GlyphVector g in all glyphvectors) {
    maxD = max(maxD, g.getDescent() + offsets[g.getBaseline()]);
    maxDL = max(maxDL, g.getDescent() + g.getLeading() +
                       offsets[g.getBaseline()]);
 }
 return maxDL - maxD;
        Returns:
        the leading of this TextLayout.

      • getBounds

        public Rectangle2D getBounds()
        Returns the bounds of this TextLayout. The bounds are in standard coordinates.

        Due to rasterization effects, this bounds might not enclose all of the pixels rendered by the TextLayout.

        It might not coincide exactly with the ascent, descent, origin or advance of the TextLayout.
        Returns:
        a Rectangle2D that is the bounds of this TextLayout.

      • getPixelBounds

        public Rectangle getPixelBounds(FontRenderContext frc,
                       float x,
                       float y)
        Returns the pixel bounds of this TextLayout when rendered in a graphics with the given FontRenderContext at the given location. The graphics render context need not be the same as the FontRenderContext used to create this TextLayout, and can be null. If it is null, the FontRenderContext of this TextLayout is used.
        Parameters:
        frc - the FontRenderContext of the Graphics.
        x - the x-coordinate at which to render this TextLayout.
        y - the y-coordinate at which to render this TextLayout.
        Returns:
        a Rectangle bounding the pixels that would be affected.
        Since:
        1.6
        See Also:
        GlyphVector.getPixelBounds(java.awt.font.FontRenderContext, float, float)

      • isLeftToRight

        public boolean isLeftToRight()
        Returns true if this TextLayout has a left-to-right base direction or false if it has a right-to-left base direction. The TextLayout has a base direction of either left-to-right (LTR) or right-to-left (RTL). The base direction is independent of the actual direction of text on the line, which may be either LTR, RTL, or mixed. Left-to-right layouts by default should position flush left. If the layout is on a tabbed line, the tabs run left to right, so that logically successive layouts position left to right. The opposite is true for RTL layouts. By default they should position flush left, and tabs run right-to-left.
        Returns:
        true if the base direction of this TextLayout is left-to-right; false otherwise.

      • isVertical

        public boolean isVertical()
        Returns true if this TextLayout is vertical.
        Returns:
        true if this TextLayout is vertical; false otherwise.

      • getCharacterCount

        public int getCharacterCount()
        Returns the number of characters represented by this TextLayout.
        Returns:
        the number of characters in this TextLayout.

      • getCaretInfo

        public float[] getCaretInfo(TextHitInfo hit,
                   Rectangle2D bounds)
        Returns information about the caret corresponding to hit. The first element of the array is the intersection of the caret with the baseline, as a distance along the baseline. The second element of the array is the inverse slope (run/rise) of the caret, measured with respect to the baseline at that point.

        This method is meant for informational use. To display carets, it is better to use getCaretShapes.

        Parameters:
        hit - a hit on a character in this TextLayout
        bounds - the bounds to which the caret info is constructed. The bounds is in baseline-relative coordinates.
        Returns:
        a two-element array containing the position and slope of the caret. The returned caret info is in baseline-relative coordinates.
        See Also:
        getCaretShapes(int, Rectangle2D, TextLayout.CaretPolicy), Font.getItalicAngle()

      • getCaretInfo

        public float[] getCaretInfo(TextHitInfo hit)
        Returns information about the caret corresponding to hit. This method is a convenience overload of getCaretInfo and uses the natural bounds of this TextLayout.
        Parameters:
        hit - a hit on a character in this TextLayout
        Returns:
        the information about a caret corresponding to a hit. The returned caret info is in baseline-relative coordinates.

      • getNextRightHit

        public TextHitInfo getNextRightHit(TextHitInfo hit)
        Returns the hit for the next caret to the right (bottom); if there is no such hit, returns null. If the hit character index is out of bounds, an IllegalArgumentException is thrown.
        Parameters:
        hit - a hit on a character in this layout
        Returns:
        a hit whose caret appears at the next position to the right (bottom) of the caret of the provided hit or null.

      • getNextRightHit

        public TextHitInfo getNextRightHit(int offset,
                          TextLayout.CaretPolicy policy)
        Returns the hit for the next caret to the right (bottom); if no such hit, returns null. The hit is to the right of the strong caret at the specified offset, as determined by the specified policy. The returned hit is the stronger of the two possible hits, as determined by the specified policy.
        Parameters:
        offset - an insertion offset in this TextLayout. Cannot be less than 0 or greater than this TextLayout object's character count.
        policy - the policy used to select the strong caret
        Returns:
        a hit whose caret appears at the next position to the right (bottom) of the caret of the provided hit, or null.

      • getNextRightHit

        public TextHitInfo getNextRightHit(int offset)
        Returns the hit for the next caret to the right (bottom); if no such hit, returns null. The hit is to the right of the strong caret at the specified offset, as determined by the default policy. The returned hit is the stronger of the two possible hits, as determined by the default policy.
        Parameters:
        offset - an insertion offset in this TextLayout. Cannot be less than 0 or greater than the TextLayout object's character count.
        Returns:
        a hit whose caret appears at the next position to the right (bottom) of the caret of the provided hit, or null.

      • getNextLeftHit

        public TextHitInfo getNextLeftHit(TextHitInfo hit)
        Returns the hit for the next caret to the left (top); if no such hit, returns null. If the hit character index is out of bounds, an IllegalArgumentException is thrown.
        Parameters:
        hit - a hit on a character in this TextLayout.
        Returns:
        a hit whose caret appears at the next position to the left (top) of the caret of the provided hit, or null.

      • getNextLeftHit

        public TextHitInfo getNextLeftHit(int offset,
                         TextLayout.CaretPolicy policy)
        Returns the hit for the next caret to the left (top); if no such hit, returns null. The hit is to the left of the strong caret at the specified offset, as determined by the specified policy. The returned hit is the stronger of the two possible hits, as determined by the specified policy.
        Parameters:
        offset - an insertion offset in this TextLayout. Cannot be less than 0 or greater than this TextLayout object's character count.
        policy - the policy used to select the strong caret
        Returns:
        a hit whose caret appears at the next position to the left (top) of the caret of the provided hit, or null.

      • getNextLeftHit

        public TextHitInfo getNextLeftHit(int offset)
        Returns the hit for the next caret to the left (top); if no such hit, returns null. The hit is to the left of the strong caret at the specified offset, as determined by the default policy. The returned hit is the stronger of the two possible hits, as determined by the default policy.
        Parameters:
        offset - an insertion offset in this TextLayout. Cannot be less than 0 or greater than this TextLayout object's character count.
        Returns:
        a hit whose caret appears at the next position to the left (top) of the caret of the provided hit, or null.

      • getVisualOtherHit

        public TextHitInfo getVisualOtherHit(TextHitInfo hit)
        Returns the hit on the opposite side of the specified hit's caret.
        Parameters:
        hit - the specified hit
        Returns:
        a hit that is on the opposite side of the specified hit's caret.

      • getCaretShape

        public Shape getCaretShape(TextHitInfo hit,
                  Rectangle2D bounds)
        Returns a Shape representing the caret at the specified hit inside the specified bounds.
        Parameters:
        hit - the hit at which to generate the caret
        bounds - the bounds of the TextLayout to use in generating the caret. The bounds is in baseline-relative coordinates.
        Returns:
        a Shape representing the caret. The returned shape is in standard coordinates.

      • getCaretShape

        public Shape getCaretShape(TextHitInfo hit)
        Returns a Shape representing the caret at the specified hit inside the natural bounds of this TextLayout.
        Parameters:
        hit - the hit at which to generate the caret
        Returns:
        a Shape representing the caret. The returned shape is in standard coordinates.

      • getCharacterLevel

        public byte getCharacterLevel(int index)
        Returns the level of the character at index. Indices -1 and characterCount are assigned the base level of this TextLayout.
        Parameters:
        index - the index of the character from which to get the level
        Returns:
        the level of the character at the specified index.

      • getCaretShapes

        public Shape[] getCaretShapes(int offset,
                     Rectangle2D bounds,
                     TextLayout.CaretPolicy policy)
        Returns two paths corresponding to the strong and weak caret.
        Parameters:
        offset - an offset in this TextLayout
        bounds - the bounds to which to extend the carets. The bounds is in baseline-relative coordinates.
        policy - the specified CaretPolicy
        Returns:
        an array of two paths. Element zero is the strong caret. If there are two carets, element one is the weak caret, otherwise it is null. The returned shapes are in standard coordinates.

      • getCaretShapes

        public Shape[] getCaretShapes(int offset,
                     Rectangle2D bounds)
        Returns two paths corresponding to the strong and weak caret. This method is a convenience overload of getCaretShapes that uses the default caret policy.
        Parameters:
        offset - an offset in this TextLayout
        bounds - the bounds to which to extend the carets. This is in baseline-relative coordinates.
        Returns:
        two paths corresponding to the strong and weak caret as defined by the DEFAULT_CARET_POLICY. These are in standard coordinates.

      • getCaretShapes

        public Shape[] getCaretShapes(int offset)
        Returns two paths corresponding to the strong and weak caret. This method is a convenience overload of getCaretShapes that uses the default caret policy and this TextLayout object's natural bounds.
        Parameters:
        offset - an offset in this TextLayout
        Returns:
        two paths corresponding to the strong and weak caret as defined by the DEFAULT_CARET_POLICY. These are in standard coordinates.

      • getLogicalRangesForVisualSelection

        public int[] getLogicalRangesForVisualSelection(TextHitInfo firstEndpoint,
                                       TextHitInfo secondEndpoint)
        Returns the logical ranges of text corresponding to a visual selection.
        Parameters:
        firstEndpoint - an endpoint of the visual range
        secondEndpoint - the other endpoint of the visual range. This endpoint can be less than firstEndpoint.
        Returns:
        an array of integers representing start/limit pairs for the selected ranges.
        See Also:
        getVisualHighlightShape(TextHitInfo, TextHitInfo, Rectangle2D)

      • getVisualHighlightShape

        public Shape getVisualHighlightShape(TextHitInfo firstEndpoint,
                            TextHitInfo secondEndpoint,
                            Rectangle2D bounds)
        Returns a path enclosing the visual selection in the specified range, extended to bounds.

        If the selection includes the leftmost (topmost) position, the selection is extended to the left (top) of bounds. If the selection includes the rightmost (bottommost) position, the selection is extended to the right (bottom) of the bounds. The height (width on vertical lines) of the selection is always extended to bounds.

        Although the selection is always contiguous, the logically selected text can be discontiguous on lines with mixed-direction text. The logical ranges of text selected can be retrieved using getLogicalRangesForVisualSelection. For example, consider the text 'ABCdef' where capital letters indicate right-to-left text, rendered on a right-to-left line, with a visual selection from 0L (the leading edge of 'A') to 3T (the trailing edge of 'd'). The text appears as follows, with bold underlined areas representing the selection: 

            defCBA
        The logical selection ranges are 0-3, 4-6 (ABC, ef) because the visually contiguous text is logically discontiguous. Also note that since the rightmost position on the layout (to the right of 'A') is selected, the selection is extended to the right of the bounds.
        Parameters:
        firstEndpoint - one end of the visual selection
        secondEndpoint - the other end of the visual selection
        bounds - the bounding rectangle to which to extend the selection. This is in baseline-relative coordinates.
        Returns:
        a Shape enclosing the selection. This is in standard coordinates.
        See Also:
        getLogicalRangesForVisualSelection(TextHitInfo, TextHitInfo), getLogicalHighlightShape(int, int, Rectangle2D)

      • getVisualHighlightShape

        public Shape getVisualHighlightShape(TextHitInfo firstEndpoint,
                            TextHitInfo secondEndpoint)
        Returns a Shape enclosing the visual selection in the specified range, extended to the bounds. This method is a convenience overload of getVisualHighlightShape that uses the natural bounds of this TextLayout.
        Parameters:
        firstEndpoint - one end of the visual selection
        secondEndpoint - the other end of the visual selection
        Returns:
        a Shape enclosing the selection. This is in standard coordinates.

      • getLogicalHighlightShape

        public Shape getLogicalHighlightShape(int firstEndpoint,
                             int secondEndpoint,
                             Rectangle2D bounds)
        Returns a Shape enclosing the logical selection in the specified range, extended to the specified bounds.

        If the selection range includes the first logical character, the selection is extended to the portion of bounds before the start of this TextLayout. If the range includes the last logical character, the selection is extended to the portion of bounds after the end of this TextLayout. The height (width on vertical lines) of the selection is always extended to bounds.

        The selection can be discontiguous on lines with mixed-direction text. Only those characters in the logical range between start and limit appear selected. For example, consider the text 'ABCdef' where capital letters indicate right-to-left text, rendered on a right-to-left line, with a logical selection from 0 to 4 ('ABCd'). The text appears as follows, with bold standing in for the selection, and underlining for the extension: 

            defCBA
        The selection is discontiguous because the selected characters are visually discontiguous. Also note that since the range includes the first logical character (A), the selection is extended to the portion of the bounds before the start of the layout, which in this case (a right-to-left line) is the right portion of the bounds.
        Parameters:
        firstEndpoint - an endpoint in the range of characters to select
        secondEndpoint - the other endpoint of the range of characters to select. Can be less than firstEndpoint. The range includes the character at min(firstEndpoint, secondEndpoint), but excludes max(firstEndpoint, secondEndpoint).
        bounds - the bounding rectangle to which to extend the selection. This is in baseline-relative coordinates.
        Returns:
        an area enclosing the selection. This is in standard coordinates.
        See Also:
        getVisualHighlightShape(TextHitInfo, TextHitInfo, Rectangle2D)

      • getLogicalHighlightShape

        public Shape getLogicalHighlightShape(int firstEndpoint,
                             int secondEndpoint)
        Returns a Shape enclosing the logical selection in the specified range, extended to the natural bounds of this TextLayout. This method is a convenience overload of getLogicalHighlightShape that uses the natural bounds of this TextLayout.
        Parameters:
        firstEndpoint - an endpoint in the range of characters to select
        secondEndpoint - the other endpoint of the range of characters to select. Can be less than firstEndpoint. The range includes the character at min(firstEndpoint, secondEndpoint), but excludes max(firstEndpoint, secondEndpoint).
        Returns:
        a Shape enclosing the selection. This is in standard coordinates.

      • getBlackBoxBounds

        public Shape getBlackBoxBounds(int firstEndpoint,
                      int secondEndpoint)
        Returns the black box bounds of the characters in the specified range. The black box bounds is an area consisting of the union of the bounding boxes of all the glyphs corresponding to the characters between start and limit. This area can be disjoint.
        Parameters:
        firstEndpoint - one end of the character range
        secondEndpoint - the other end of the character range. Can be less than firstEndpoint.
        Returns:
        a Shape enclosing the black box bounds. This is in standard coordinates.

      • hitTestChar

        public TextHitInfo hitTestChar(float x,
                      float y,
                      Rectangle2D bounds)
        Returns a TextHitInfo corresponding to the specified point. Coordinates outside the bounds of the TextLayout map to hits on the leading edge of the first logical character, or the trailing edge of the last logical character, as appropriate, regardless of the position of that character in the line. Only the direction along the baseline is used to make this evaluation.
        Parameters:
        x - the x offset from the origin of this TextLayout. This is in standard coordinates.
        y - the y offset from the origin of this TextLayout. This is in standard coordinates.
        bounds - the bounds of the TextLayout. This is in baseline-relative coordinates.
        Returns:
        a hit describing the character and edge (leading or trailing) under the specified point.

      • hitTestChar

        public TextHitInfo hitTestChar(float x,
                      float y)
        Returns a TextHitInfo corresponding to the specified point. This method is a convenience overload of hitTestChar that uses the natural bounds of this TextLayout.
        Parameters:
        x - the x offset from the origin of this TextLayout. This is in standard coordinates.
        y - the y offset from the origin of this TextLayout. This is in standard coordinates.
        Returns:
        a hit describing the character and edge (leading or trailing) under the specified point.

      • equals

        public boolean equals(Object obj)
        Returns true if the specified Object is a TextLayout object and if the specified Object equals this TextLayout.
        Overrides:
        equals in class Object
        Parameters:
        obj - an Object to test for equality
        Returns:
        true if the specified Object equals this TextLayout; false otherwise.
        See Also:
        Object.hashCode(), HashMap

      • equals

        public boolean equals(TextLayout rhs)
        Returns true if the two layouts are equal. Two layouts are equal if they contain equal glyphvectors in the same order.
        Parameters:
        rhs - the TextLayout to compare to this TextLayout
        Returns:
        true if the specified TextLayout equals this TextLayout.

      • toString

        public String toString()
        Returns debugging information for this TextLayout.
        Overrides:
        toString in class Object
        Returns:
        the textLine of this TextLayout as a String.

      • draw

        public void draw(Graphics2D g2,
        float x,
        float y)
        Renders this TextLayout at the specified location in the specified Graphics2D context. The origin of the layout is placed at x, y. Rendering may touch any point within getBounds() of this position. This leaves the g2 unchanged. Text is rendered along the baseline path.
        Parameters:
        g2 - the Graphics2D context into which to render the layout
        x - the X coordinate of the origin of this TextLayout
        y - the Y coordinate of the origin of this TextLayout
        See Also:
        getBounds()

      • getOutline

        public Shape getOutline(AffineTransform tx)
        Returns a Shape representing the outline of this TextLayout.
        Parameters:
        tx - an optional AffineTransform to apply to the outline of this TextLayout.
        Returns:
        a Shape that is the outline of this TextLayout. This is in standard coordinates.

      • getLayoutPath

        public LayoutPath getLayoutPath()
        Return the LayoutPath, or null if the layout path is the default path (x maps to advance, y maps to offset).
        Returns:
        the layout path
        Since:
        1.6

      • hitToPoint

        public void hitToPoint(TextHitInfo hit,
              Point2D point)
        Convert a hit to a point in standard coordinates. The point is on the baseline of the character at the leading or trailing edge of the character, as appropriate. If the path is broken at the side of the character represented by the hit, the point will be adjacent to the character.
        Parameters:
        hit - the hit to check. This must be a valid hit on the TextLayout.
        point - the returned point. The point is in standard coordinates.
        Throws:
        IllegalArgumentException - if the hit is not valid for the TextLayout.
        NullPointerException - if hit or point is null.
        Since:
        1.6

Deutsche Übersetzung

Sie haben gebeten, diese Seite auf Deutsch zu besuchen. Momentan ist nur die Oberfläche übersetzt, aber noch nicht der gesamte Inhalt.

Wenn Sie mir bei Übersetzungen helfen wollen, ist Ihr Beitrag willkommen. Alles, was Sie tun müssen, ist, sich auf der Website zu registrieren und mir eine Nachricht zu schicken, in der Sie gebeten werden, Sie der Gruppe der Übersetzer hinzuzufügen, die Ihnen die Möglichkeit gibt, die gewünschten Seiten zu übersetzen. Ein Link am Ende jeder übersetzten Seite zeigt an, dass Sie der Übersetzer sind und einen Link zu Ihrem Profil haben.

Vielen Dank im Voraus.

Dokument erstellt 11/06/2005, zuletzt geändert 04/03/2020
Quelle des gedruckten Dokuments:https://www.gaudry.be/de/java-api-rf-java/awt/font/textlayout.html

Die Infobro ist eine persönliche Seite, deren Inhalt in meiner alleinigen Verantwortung liegt. Der Text ist unter der CreativeCommons-Lizenz (BY-NC-SA) verfügbar. Weitere Informationen auf die Nutzungsbedingungen und dem Autor.

Referenzen

  1. Zeigen Sie - html-Dokument Sprache des Dokuments:fr Manuel PHP : https://docs.oracle.com

Diese Verweise und Links verweisen auf Dokumente, die während des Schreibens dieser Seite konsultiert wurden, oder die zusätzliche Informationen liefern können, aber die Autoren dieser Quellen können nicht für den Inhalt dieser Seite verantwortlich gemacht werden.
Der Autor Diese Website ist allein dafür verantwortlich, wie die verschiedenen Konzepte und Freiheiten, die mit den Nachschlagewerken gemacht werden, hier dargestellt werden. Denken Sie daran, dass Sie mehrere Quellinformationen austauschen müssen, um das Risiko von Fehlern zu reduzieren.

Inhaltsverzeichnis Haut